I had a few problems running nph-build, nph-verify and nph-email. It would run them in the background, but would show me an "Internal Server Error".
I sat down and worked on the problem for about 10 hours and finally found a solution.
If you are getting an "Internal Server Error" on these three, and it takes some time before you see it, (as in after clicking 'Build All' ect..., the error doesnt show up right away, but you can count to more then say 5 before it appears) there are a few lines in these scripts that need changing.
Now I can't say this "Will" work for you, but it did for me. Just posting another solution for Cobalt RaQ servers.
nph-build.cgi
_________________________
In the
sub main {
change:
---------------
$use_html = 0;
---------------
to:
---------------
$use_html = 1;
---------------
In both the
sub build_staggered {
and
sub build_all {
comment the lines:
---------------
$nph++;
---------------
like this:
---------------
# $nph++;
---------------
nph-verify.cgi
_________________________
comment the line:
---------------
print "HTTP/1.0 200 OK\n";
---------------
like this:
---------------
# print "HTTP/1.0 200 OK\n";
---------------
nph-email.cgi
_________________________
In the
sub main {
comment the line:
---------------
$nph++;
---------------
like this:
---------------
# $nph++;
---------------
I hope this helps someone.
Someone keep this around as I may not get back to the forum often enough.
Eric
I sat down and worked on the problem for about 10 hours and finally found a solution.
If you are getting an "Internal Server Error" on these three, and it takes some time before you see it, (as in after clicking 'Build All' ect..., the error doesnt show up right away, but you can count to more then say 5 before it appears) there are a few lines in these scripts that need changing.
Now I can't say this "Will" work for you, but it did for me. Just posting another solution for Cobalt RaQ servers.
nph-build.cgi
_________________________
In the
sub main {
change:
---------------
$use_html = 0;
---------------
to:
---------------
$use_html = 1;
---------------
In both the
sub build_staggered {
and
sub build_all {
comment the lines:
---------------
$nph++;
---------------
like this:
---------------
# $nph++;
---------------
nph-verify.cgi
_________________________
comment the line:
---------------
print "HTTP/1.0 200 OK\n";
---------------
like this:
---------------
# print "HTTP/1.0 200 OK\n";
---------------
nph-email.cgi
_________________________
In the
sub main {
comment the line:
---------------
$nph++;
---------------
like this:
---------------
# $nph++;
---------------
I hope this helps someone.
Someone keep this around as I may not get back to the forum often enough.
Eric