User Information
New User
Registered User - Offline
Feb 17, 2017, 2:46 AM
Mar 10, 2017, 3:16 AM
General Information
May 11, 2024, 10:09 PM
Many thanks very much for your rating This function may be used only with cookies triggered.
How to quickly get the hang of it
Use a wood drill bit with a centring tip. You should use a twist drill bit for normal holes with little to medium diameter. An auger bit is recommended for drilling deep holes with diameter of 8-10 mm or more. The Forstner drill bit would work for drilling superficial holes of up to 30 mm diameter.
AU $399.00 is ideal for drilling through-holes with 30 mm diameter or maybe more.
Always use wood screws. They have actually a high-incline thread and a pronounced tip. The shank is cylindrical or conical.
Be sure that the bit you employ in your tool fits the screw completely. Otherwise it might slip out of the screw during screwdriving. Torx” screws offer the best grip, cross head” screws (technical term: Pozidriv or Philips) are better suited than slotted screws.
You will achieve the very best result by drilling along the grain for the wood. Set the right speed. In the event that speed is too low, the resulting hole will be untidy. In the event that speed is simply too high, there is a risk of the workpiece overheating and burn marks occurring. Place the drill bit cleanly from the workpiece.
Fix the workpiece utilizing clamps to prevent it from slipping during drilling. Place a scrap panel underneath the workpiece, so that one may drill into the scrap panel without damaging your worktop. This also prevents fibres from being torn away once you drill through the workpiece.
To get in touch two bits of wood with screws, always pre-drill a hole that is 0.5 to at least one mm larger than the screw diameter into the piece where you wish to insert the screws first. On the other hand, you should always pre-
Code: N29LK that is 1 mm smaller in the piece you are screwing into. This helps to ensure that the thread will grip well.
If you are using flat head screws, countersink the drilled hole deep enough for the top of the screw to disappear into it totally.
Jobs using this application
Legal note
:011 651 9600
Show other projects
Hide other projects
Close application tip
Open application tip
Close experience report
Go to: https://www.bookmarkee.com/p/hartmannalstrup90
http://youmob.com/mob.aspx?cat=4&mob=http://cordlessdrillsales.com/category/reviews/