jack at chainreactionweb
Apr 2, 2005, 2:49 PM
Post #1 of 2
(168 views)
Permalink
|
Hi,
using xen 2.0.5
kernel 2.6.10
Now, it matters little weather I make modifications to the kernel or use
the 2.0.5 kernel compile as stock.
Everything works fine when the pc is running, there seem to be no issues
there.
However, when I go to reboot, it fails to do so unless I've made a
change to the partition table. I don't understand why this is, but I
thought I'd mention it.
The system in use is gentoo
runnig on asus mainboard, intel 875 chipset, 2g ram, 4 sata harddrive, 1
pata drive. etc. Nothing unusual here. All hardware supported.
any ideas?
--
Jack Downes <jack [at] chainreactionweb>
Chain Reaction Web
_______________________________________________
Xen-users mailing list
Xen-users [at] lists
http://lists.xensource.com/xen-users
|
