kernmonk at gmail
Jul 18, 2009, 9:20 AM
Post #2 of 2
(128 views)
Permalink
|
God bless you Boris & Marc , It worked !
Regards,
Leena
On Sat, Jul 18, 2009 at 9:36 PM, Boris Derzhavets <bderzhavets [at] yahoo>wrote:
> Marc wrote you. Check /boot folder for intrd-2.6.18-xen.img presence.
> It' s just names mismatching or you didn't install initrd into /boot.
>
> Boris.
>
> --- On *Sat, 7/18/09, Leena M. <kernmonk [at] gmail>* wrote:
>
>
> From: Leena M. <kernmonk [at] gmail>
> Subject: Re: [Xen-devel] Xen not booting !
> To: "Boris Derzhavets" <bderzhavets [at] yahoo>
> Cc: "Marc - A. Dahlhaus" <mad [at] wol>, "xen-devel" <
> xen-devel [at] lists>, xen-users [at] lists,
> xen-community [at] lists
> Date: Saturday, July 18, 2009, 12:00 PM
>
>
> Do you think there is some problem with the way I did the
> installation ? Wrongly created the initrd file ??
> are the /etc/fstab and the device.map entries are in sync with the
> grub/menu.lst
> and please find the config file attached if that is required.
>
>
> On Sat, Jul 18, 2009 at 9:24 PM, Boris Derzhavets <bderzhavets [at] yahoo<http://mc/compose?to=bderzhavets [at] yahoo>
> > wrote:
>
>> You are right. Only third file missing. My mistake.
>>
>> Boris.
>>
>> --- On *Sat, 7/18/09, Marc - A. Dahlhaus <mad [at] wol<http://mc/compose?to=mad [at] wol>
>> >* wrote:
>>
>>
>> From: Marc - A. Dahlhaus <mad [at] wol <http://mc/compose?to=mad [at] wol>>
>> Subject: Re: [Xen-devel] Xen not booting !
>> To: "Leena M." <kernmonk [at] gmail<http://mc/compose?to=kernmonk [at] gmail>
>> >
>> Cc: "xen-devel" <xen-devel [at] lists<http://mc/compose?to=xen-devel [at] lists>>,
>> xen-users [at] lists<http://mc/compose?to=xen-users [at] lists>,
>> xen-community [at] lists<http://mc/compose?to=xen-community [at] lists>
>> Date: Saturday, July 18, 2009, 11:45 AM
>>
>> Hello,
>>
>> Leena M. schrieb:
>> > Hi All,
>> > I am not able to boot Xen .
>> >
>> > My "/boot/grub/menu.lst" has this entry
>> >
>> > title Xen 3.3.2-rc5 / Debian GNU/Linux, kernel 2.6.18.8-xen
>> > root (hd0,0)
>> > kernel /boot/xen-3.3.2-rc5.gz
>> > module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro
>> console=tty0
>> > module /boot/initrd.img-2.6.18.8-xen
>> > savedefault
>> >
>> >
>> > I am getting following error :
>> > ERROR WHILE BOOTING =>
>> > ------------------------------
>> > --------------------------------------------------------------------
>> > Booting 'Xen 3.3.2-rc5 / Debian GNU/Linux, Kernel 2.6.18.8-xen'
>> >
>> > root (hda0,0)
>> looks like a typo here you entered this by hand didn't you?!
>> > Filesystem type is ext2fs, partition type 0x83
>> > kernel /boot/xen-3.3.2-rc5.gz
>> > [Multiboot-elf,<0x100000:0xfd6b0:0x77950>,shtab=0x275078,entry=0
>> grub found the file
>> > module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro console=tty0
>> > [Multiboot-module @ 0x276000,0x5419c0 bytes]
>> grub found the file
>> > module /boot/initrd.img-2.6.18.8-xen
>> >
>> > Error 15: File not found
>> grub found no such file /boot/initrd.img-2.6.18.8-xen on (hd0,0)...
>> typo in filename?
>>
>> on grubs prompt a "ls (hd0,0)/boot" should show what grub can load and
>> what not...
>> >
>> > press any key to continue ...
>> >
>> -----------------------------------------------------------------------------------------------------
>> >
>> >
>> > Please Help me.
>> >
>> > ----
>> > I followed the following procedure from the
>> > "Introduction to the Open Source Xen Hypervisor"
>> > Zach Shepherd and Wenjin
>> > taken from xen blog.
>> >
>> > Install required packages
>> > (e.g. apt-get install gawk libssl-dev libx11-dev gettext libncurses-dev
>> > build-essential python-dev texlive-latex-base transfig tetex-extra
>> > bcc bin86 pciutils-dev git-core curl texinfo libc6-dev mercurial
>> > bridge-utils graphviz)
>> > Download the latest Xen release
>> > (e.g. hg clone http://xenbits.xen.org/xen-3.3-testing.hg)
>> > Compile and Install
>> > (e.g. make world; make install)
>> > Create a ramdisk
>> > (e.g depmod 2.6.18.8-xen;mkinitramfs -o /boot/initrd.img-2.6.18.8-xen
>> > 2.6.18.8-xen )
>> > Configure the bootloader
>> > (e.g update-grub)
>> >
>> >
>> >
>> > Following are the entries in relevant files =>
>> >
>> -------------------------------------------------------------------------------------------------
>> > # cat /etc/fstab
>> > # /etc/fstab: static file system information.
>> > #
>> > # <file system> <mount point> <type> <options> <dump> <pass>
>> > proc /proc proc defaults 0 0
>> > /dev/sda1 / ext3 defaults,errors=remount-ro
>> > 0 1
>> > /dev/sda5 none swap sw 0 0
>> > /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
>> >
>> -----------------------------------------------------------------------------------------------------
>> > # cat /boot/grub/device.map
>> > (hd0) /dev/sda
>> > (hd1) /dev/sdb
>> >
>> -------------------------------------------------------------------------------------------------------
>> >
>> >
>> > Regards,
>> > Leena
>> > ------------------------------------------------------------------------
>> >
>> > _______________________________________________
>> > Xen-devel mailing list
>> > Xen-devel [at] lists<http://mc/compose?to=Xen-devel [at] lists>
>> > http://lists.xensource.com/xen-devel
>> >
>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel [at] lists<http://mc/compose?to=Xen-devel [at] lists>
>> http://lists.xensource.com/xen-devel
>>
>>
>>
>
>
|
