
saravanan.nagarajan87 at gmail
Mar 26, 2012, 8:43 AM
Views: 1103
Permalink
|
|
./vpnc: response was invalid [1]: (ISAKMP_N_INVALID_EXCHANGE_TYPE)(7)
|
|
Hi Friends, I m trying to establish a Remote VPN session with Openswan, but I m getting the below error message. I desperately need your help to solve this problem, since I have been working on this for a long time. It would be great if you provide meany working configuration with Openswan. *./vpnc: response was invalid [1]: (ISAKMP_N_INVALID_EXCHANGE_TYPE)(7)* S4.4 AM_packet2 [2012-03-26 22:34:06] BEGIN_PARSE Recieved Packet Len: 40 i_cookie: ac3bcea1 62a33381 r_cookie: 826f6427 0dc4a7f3 payload: 0b (ISAKMP_PAYLOAD_N) isakmp_version: 10 exchange_type: 05 (ISAKMP_EXCHANGE_ INFORMATIONAL) flags: 00 message_id: 00000000 len: 00000028 PARSING PAYLOAD type: 0b (ISAKMP_PAYLOAD_N) next_type: 00 (ISAKMP_PAYLOAD_NONE) length: 000c n.doi: 00000001 (ISAKMP_DOI_IPSEC) n.protocol: 01 (ISAKMP_IPSEC_PROTO_ISAKMP) n.spi_length: 00 n.type: 000e (ISAKMP_N_NO_PROPOSAL_CHOSEN) n.spi: n.data: DONE PARSING PAYLOAD type: 0b (ISAKMP_PAYLOAD_N) PARSING PAYLOAD type: 00 (ISAKMP_PAYLOAD_NONE) PARSE_OK ./vpnc: response was invalid [1]: (ISAKMP_N_INVALID_EXCHANGE_TYPE)(7) * Configuration +++++++++* IPSec gateway 172.31.114.227 IPSec ID tester.cas.com IKE Authmode psk IPSec secret mypresharedkey NAT Traversal Mode natt Xauth username tester Xauth password tester #Enable Triple DES IKE DH Group dh2 debug 2 * Openswan +++++++++* config setup protostack=netkey klipsdebug=all plutodebug=all nat_traversal=no virtual_private= oe=off nhelpers=0 interfaces=%defaultroute conn north-east type=tunnel right=%any left=172.31.114.227 rightid=tester.cas.com rightxauthclient=yes leftxauthserver=yes rightxauthusername=tester aggrmode=yes ike=3des-sha-modp1024 auto=add authby=secret pfs=no *Secrets* 172.31.114.227 0.0.0.0: PSK "mypresharedkey" @tester : XAUTH "tester" Regards, Saravanan.
|