vpnc at unix-ag
Nov 12, 2011, 4:48 PM
Post #1 of 1
(185 views)
Permalink
|
|
svn commit: vpnc r473 - /branches/vpnc-nortel/README /branches/vpnc-nortel/pcf2vpnc.1 /branches/vpnc-nortel/vpnc.8.template /trunk/README /trunk/pcf2vpnc.1 /trunk/vpnc.8.template
|
|
Author: Antonio Borneo
Date: Sun Nov 13 01:48:06 2011
New Revision: 473
Log:
Ville Skyttä <ville.skytta [at] iki>
Documentation: fix spelling
Modified:
branches/vpnc-nortel/README
branches/vpnc-nortel/pcf2vpnc.1
branches/vpnc-nortel/vpnc.8.template
trunk/README
trunk/pcf2vpnc.1
trunk/vpnc.8.template
Modified: branches/vpnc-nortel/README
==============================================================================
--- branches/vpnc-nortel/README (original)
+++ branches/vpnc-nortel/README Sun Nov 13 01:48:06 2011
@@ -14,7 +14,7 @@
========= Contents of this file ============================================
-- Gereral configuration of vpnc
+- General configuration of vpnc
- Using a modified script
- Additional steps to configure hybrid authentication
- Setting up vpnc on Vista 64bit
@@ -82,24 +82,24 @@
This option is passed to system(), so you can use any shell-specials you
like. This script gets called three times:
-$reason == pre-init: this is befor vpnc opens the tun device
- so you can do what is neccessary to ensure that it is available.
+$reason == pre-init: this is before vpnc opens the tun device
+ so you can do what is necessary to ensure that it is available.
Note that none of the variables mentioned below is available
$reason == connect: this is what used to be "Config Script".
The connection is established, but vpnc will not begin forwarding
- packets until the script finishs.
+ packets until the script finishes.
$reason == disconnect: This is called just after vpnc received a signal.
Note that vpnc will not forward packets anymore while the script is
- running or therafter.
-
-Information is passed from vpnc via enviroment variables:
+ running or thereafter.
+
+Information is passed from vpnc via environment variables:
#* reason -- why this script was called, one of: pre-init connect disconnect
#* VPNGATEWAY -- vpn gateway address (always present)
#* TUNDEV -- tunnel device (always present)
#* INTERNAL_IP4_ADDRESS -- address (always present)
#* INTERNAL_IP4_NETMASK -- netmask (often unset)
-#* INTERNAL_IP4_DNS -- list of dns serverss
+#* INTERNAL_IP4_DNS -- list of dns servers
#* INTERNAL_IP4_NBNS -- list of wins servers
#* CISCO_DEF_DOMAIN -- default domain name
#* CISCO_BANNER -- banner from server
@@ -178,7 +178,7 @@
1. Install cygwin onto vista. Details here: http://www.cygwin.com/
2. Make sure you install the development options for cygwin to give you
access to make and gcc etc
-3. Make sure you install libcrypt for cygwin as it is needed in the make
+3. Make sure you install libgcrypt for cygwin as it is needed in the make
4. Modify the bash.exe to run as administrator or you will have
privilege issues later, this is done on the properties tab of the
executable in c:/cygwin/bin
@@ -186,7 +186,7 @@
http://www.unix-ag.uni-kl.de/~massar/vpnc/
5. Unzip and explode the tarball
6. modify tap-win32.h to change #define TAP_COMPONENT_ID "tap0801" to
- "tap0901" (No sure if this is necesary but I did it and it is working
+ "tap0901" (No sure if this is necessary but I did it and it is working
for me)
7. make
8. You should have a shinny new vpnc.exe
Modified: branches/vpnc-nortel/pcf2vpnc.1
==============================================================================
--- branches/vpnc-nortel/pcf2vpnc.1 (original)
+++ branches/vpnc-nortel/pcf2vpnc.1 Sun Nov 13 01:48:06 2011
@@ -15,7 +15,7 @@
If [\fIvpnc file\fR] is not specified, the result will be
printed to STDOUT. If specified, it will be written to that
-file. Please make sure that it has apropriate permissions as
+file. Please make sure that it has appropriate permissions as
it may contain sensitive data!
.SH "AUTHOR"
pcf2vpnc was originally written by Stefan Tomanek. Updates and this man\-page were made by Wolfram Sang (ninja(at)the\-dreams.de).
Modified: branches/vpnc-nortel/vpnc.8.template
==============================================================================
--- branches/vpnc-nortel/vpnc.8.template (original)
+++ branches/vpnc-nortel/vpnc.8.template Sun Nov 13 01:48:06 2011
@@ -95,7 +95,7 @@
.I /etc/vpnc/default.conf
.RS
The default configuration file. You can specify the same config
-directives as with command line options and additionaly
+directives as with command line options and additionally
.B IPSec secret
and
.B Xauth password
Modified: trunk/README
==============================================================================
--- trunk/README (original)
+++ trunk/README Sun Nov 13 01:48:06 2011
@@ -14,7 +14,7 @@
========= Contents of this file ============================================
-- Gereral configuration of vpnc
+- General configuration of vpnc
- Using a modified script
- Additional steps to configure hybrid authentication
- Setting up vpnc on Vista 64bit
@@ -82,24 +82,24 @@
This option is passed to system(), so you can use any shell-specials you
like. This script gets called three times:
-$reason == pre-init: this is befor vpnc opens the tun device
- so you can do what is neccessary to ensure that it is available.
+$reason == pre-init: this is before vpnc opens the tun device
+ so you can do what is necessary to ensure that it is available.
Note that none of the variables mentioned below is available
$reason == connect: this is what used to be "Config Script".
The connection is established, but vpnc will not begin forwarding
- packets until the script finishs.
+ packets until the script finishes.
$reason == disconnect: This is called just after vpnc received a signal.
Note that vpnc will not forward packets anymore while the script is
- running or therafter.
-
-Information is passed from vpnc via enviroment variables:
+ running or thereafter.
+
+Information is passed from vpnc via environment variables:
#* reason -- why this script was called, one of: pre-init connect disconnect
#* VPNGATEWAY -- vpn gateway address (always present)
#* TUNDEV -- tunnel device (always present)
#* INTERNAL_IP4_ADDRESS -- address (always present)
#* INTERNAL_IP4_NETMASK -- netmask (often unset)
-#* INTERNAL_IP4_DNS -- list of dns serverss
+#* INTERNAL_IP4_DNS -- list of dns servers
#* INTERNAL_IP4_NBNS -- list of wins servers
#* CISCO_DEF_DOMAIN -- default domain name
#* CISCO_BANNER -- banner from server
@@ -178,7 +178,7 @@
1. Install cygwin onto vista. Details here: http://www.cygwin.com/
2. Make sure you install the development options for cygwin to give you
access to make and gcc etc
-3. Make sure you install libcrypt for cygwin as it is needed in the make
+3. Make sure you install libgcrypt for cygwin as it is needed in the make
4. Modify the bash.exe to run as administrator or you will have
privilege issues later, this is done on the properties tab of the
executable in c:/cygwin/bin
@@ -186,7 +186,7 @@
http://www.unix-ag.uni-kl.de/~massar/vpnc/
5. Unzip and explode the tarball
6. modify tap-win32.h to change #define TAP_COMPONENT_ID "tap0801" to
- "tap0901" (No sure if this is necesary but I did it and it is working
+ "tap0901" (No sure if this is necessary but I did it and it is working
for me)
7. make
8. You should have a shinny new vpnc.exe
Modified: trunk/pcf2vpnc.1
==============================================================================
--- trunk/pcf2vpnc.1 (original)
+++ trunk/pcf2vpnc.1 Sun Nov 13 01:48:06 2011
@@ -15,7 +15,7 @@
If [\fIvpnc file\fR] is not specified, the result will be
printed to STDOUT. If specified, it will be written to that
-file. Please make sure that it has apropriate permissions as
+file. Please make sure that it has appropriate permissions as
it may contain sensitive data!
.SH "AUTHOR"
pcf2vpnc was originally written by Stefan Tomanek. Updates and this man\-page were made by Wolfram Sang (ninja(at)the\-dreams.de).
Modified: trunk/vpnc.8.template
==============================================================================
--- trunk/vpnc.8.template (original)
+++ trunk/vpnc.8.template Sun Nov 13 01:48:06 2011
@@ -95,7 +95,7 @@
.I /etc/vpnc/default.conf
.RS
The default configuration file. You can specify the same config
-directives as with command line options and additionaly
+directives as with command line options and additionally
.B IPSec secret
and
.B Xauth password
_______________________________________________
vpnc-devel mailing list
vpnc-devel [at] unix-ag
https://lists.unix-ag.uni-kl.de/mailman/listinfo/vpnc-devel
http://www.unix-ag.uni-kl.de/~massar/vpnc/
|
