dick at mrns
Sep 21, 2009, 12:49 PM
Post #2 of 6
(596 views)
Permalink
|
|
Re: vpnc-nortel can establish connection but doesn't receive any traffic
[In reply to]
|
|
I still have the same error (can connect but I can't get any traffic through my
VPN, I've configured the routes correctly and when I change the credentials I
get a message about incorrect credentials.
$ vpnc --debug 2 --no-detach
vpnc version 0.5.3
S1 init_sockaddr
[2009-09-21 21:47:25]
S2 make_socket
[2009-09-21 21:47:25]
S3 setup_tunnel
[2009-09-21 21:47:25]
using interface tun0
S4 do_phase1_am
[2009-09-21 21:47:25]
S4.1 create_nonce
[2009-09-21 21:47:25]
S4.2 dh setup
[2009-09-21 21:47:25]
S4.3 AM packet_1
[2009-09-21 21:47:25]
S4.4 AM_packet2
[2009-09-21 21:47:25]
(unknown)
(DPD)
IKE SA selected psk-3des-sha1
peer is DPD capable (RFC3706)
NAT status: no NAT-T VID seen
S4.5 AM_packet3
[2009-09-21 21:47:25]
S4.6 cleanup
[2009-09-21 21:47:25]
S5 do_phase2_xauth [1]
[2009-09-21 21:47:25]
S5.1 xauth_request
[2009-09-21 21:47:25]
S5.2 notice_check
[2009-09-21 21:47:25]
S5.3 type-is-xauth check
[2009-09-21 21:47:25]
S5.4 xauth type check
[2009-09-21 21:47:25]
S5.5 do xauth reply
[2009-09-21 21:47:25]
S5.2 notice_check
[2009-09-21 21:47:25]
S5.3 type-is-xauth check
[2009-09-21 21:47:25]
S5.6 process xauth set
[2009-09-21 21:47:25]
S5.8 xauth done
[2009-09-21 21:47:25]
S6 do_phase2_config [1]
[2009-09-21 21:47:25]
S6.2 phase2_config receive modecfg
[2009-09-21 21:47:25]
unknown attribute 6 / 0x6
unknown attribute 16392 / 0x4008
unknown attribute 16395 / 0x400B
unknown attribute 16396 / 0x400C
unknown attribute 16398 / 0x400E
unknown attribute 16397 / 0x400D
unknown attribute 16403 / 0x4013
unknown attribute 16400 / 0x4010
got address 10.137.0.24
S6 do_phase2
[2009-09-21 21:47:25]
do_phase2: S7.5 QM_packet2 check reject offer
[2009-09-21 21:47:25]
do_phase2: S7.6 QM_packet2 check and process proposal
[2009-09-21 21:47:25]
got ipsec lifetime attributes: 28800 seconds
IPSEC SA selected 3des-md5
do_phase2: S7.1 QM_packet1
[2009-09-21 21:47:25]
do_phase2: S7.7 QM_packet3 sent - run script
[2009-09-21 21:47:25]
S7 setup_link (phase 2 + main_loop)
[2009-09-21 21:47:25]
S7.0 run interface setup script
[2009-09-21 21:47:25]
S7.8 setup ipsec tunnel
[2009-09-21 21:47:25]
S7.9 main loop (receive and transmit ipsec packets)
[2009-09-21 21:47:25]
remote -> local spi: 0xa5fe3fb6
local -> remote spi: 0x9304602
VPNC started in foreground...
lifetime status: 0 of 28800 seconds used, 0|0 of 0 kbytes used
got late ike packet: 84 bytes
got r-u-there ack
lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 5 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 6 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 7 of 28800 seconds used, 0|0 of 0 kbytes used
lifetime status: 7 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 8 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 9 of 28800 seconds used, 0|1 of 0 kbytes used
lifetime status: 9 of 28800 seconds used, 0|2 of 0 kbytes used
_______________________________________________
vpnc-devel mailing list
vpnc-devel[at]unix-ag.uni-kl.de
https://lists.unix-ag.uni-kl.de/mailman/listinfo/vpnc-devel
http://www.unix-ag.uni-kl.de/~massar/vpnc/
|
