Chris.Young at serco
Jan 30, 2008, 2:56 AM
Post #3 of 4
syslinux-bounces [at] zytor wrote on 28/01/2008 18:15:36:
Re: SYSLINUX doing odd things since upgrade
[In reply to]
> Chris.Young [at] serco wrote:
> > Hello list!
> > I'm tearing my hair out over this. I have a USB flash drive that has
> > working nicely with SYSLINUX for about a year, and I have upgraded
> > SYSLINUX on it a couple of times during that period with no ill
> > including a complete format/re-install from scratch.
> > However, on Friday I was using this drive (and it was working) and I
> > decided to upgrade to the latest version (3.60) from whatever was
> > installed (I think 3.54). I also updated MEMDISK and MENU.C32 at the
> > time.
> > SYSLINUX still boots to the prompt, but loading MENU.C32 either
> > reboots the PC or - on one occasion - complains of a corrupted kernel
> > image. MEMDISK is similarly afflicted, as it successfully loads a
> > compressed disk image but freezes at "loading boot sector".
> > I have tried downgrading to every version of SYSLINUX, MENU.C32 and
> > MEMDISK to 3.51, and even tried 3.35 out of desperation. Even
> > and setting everything up from scratch as I have done in the past
> > cure the problem (I use the win32 executable syslinux -mad boot f:).
> > problems are occuring on the exact same PC I was using before getting
> > problems (a Dell GX280 A06), and I tried some other PCs too just in
> > Any suggestions? I'm lost without this - didn't realise how much I
> > it!
> Since you say it fails with multiple machines... any way you could send
> an image of the failing drive, so I could try to reproduce the boot
> failure here?
Sent by private mail.
However... I've managed to get it working. The drive needed to be
formatted as FAT32 not FAT16. This still doesn't explain why it suddenly
stopped working after I upgraded it, and I thought it was formatted as
FAT16 previously. My DOS.BSS isn't working but I'm not too bothered about
that (it's handy for the Panasonic Toughbooks which don't seem to like
memdisk) and I can try to fix that later.
Thanks Peter for a great little bootloader.
This e-mail and any attachments are for the intended addressee(s) only and may contain confidential and/or privileged material. If you are not a named addressee, do not use, retain or disclose such information. This email is not guaranteed to be free from viruses and does not bind Serco in any contract or obligation.
Serco Limited. Registered in England and Wales. No: 242246 Registered Office: Serco House,16 Bartley Wood Business Park, Bartley Way, Hook, Hampshire RG27 9UY United Kingdom.
SYSLINUX mailing list
Submissions to SYSLINUX [at] zytor
Unsubscribe or set options at:
Please do not send private replies to mailing list traffic.