Mailing List Archive: RANCID: Users

6500 Doubts

Index | Next | Previous | View Threaded

pxb368 at motorola

Jul 31, 2012, 11:05 AM

Post #1 of 4 (339 views)
Permalink

6500 Doubts

Hello,

I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500 and
5500) and Foundry switches. The backup of these devices is running to all
expect one which is a Cisco CatOS 6500. The config into the routed.db is
hostname:cat5:up and I can ping the switch with the hostname. I can also
use clogin hostname and I'll be prompted to the (enable) console, however
when I do rancid-run into the log files I have this message:

Trying to get all of the configs.
hostname: missed cmd(s): write term all,show port ifindex,show module,dir
sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
version,show flash,show running-config,write term,show boot,dir slot1:,show
inventory raw

I do have other 6500 in the network which rancid works perfectly only this
one is not working.

Any ideas ?

Thanks in advance,

--
Danilo Marques de Gouveia

daniel.schmidt at wyo

Aug 1, 2012, 12:33 PM

Post #2 of 4 (329 views)
Permalink

Re: 6500 Doubts [In reply to]

Try the commands manually as the rancid user. Maybe one of them is
hanging.

*From:* rancid-discuss-bounces [at] shrubbery [mailto:
rancid-discuss-bounces [at] shrubbery] *On Behalf Of *Danilo Gouveia
*Sent:* Tuesday, July 31, 2012 12:05 PM
*To:* rancid-discuss [at] shrubbery
*Subject:* [rancid] 6500 Doubts

Hello,

I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500 and
5500) and Foundry switches. The backup of these devices is running to all
expect one which is a Cisco CatOS 6500. The config into the routed.db is
hostname:cat5:up and I can ping the switch with the hostname. I can also
use clogin hostname and I'll be prompted to the (enable) console, however
when I do rancid-run into the log files I have this message:

Trying to get all of the configs.

hostname: missed cmd(s): write term all,show port ifindex,show module,dir
sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
version,show flash,show running-config,write term,show boot,dir slot1:,show
inventory raw

I do have other 6500 in the network which rancid works perfectly only this
one is not working.

Any ideas ?

Thanks in advance,

--
Danilo Marques de Gouveia

E-Mail to and from me, in connection with the transaction
of public business, is subject to the Wyoming Public Records
Act and may be disclosed to third parties.

pxb368 at motorola

Aug 1, 2012, 12:44 PM

Post #3 of 4 (331 views)
Permalink

Re: 6500 Doubts [In reply to]

The unique command I had problem was show inventory raw, the other were ok,
however in both switches (the one it works and the one it doesn't) the show
inventory raw fails, if I try only show inventory that is ok.

Any other ideas?

On Wed, Aug 1, 2012 at 4:33 PM, Daniel Schmidt <daniel.schmidt [at] wyo>wrote:

> Try the commands manually as the rancid user. Maybe one of them is
> hanging.
>
>
>
> *From:* rancid-discuss-bounces [at] shrubbery [mailto:
> rancid-discuss-bounces [at] shrubbery] *On Behalf Of *Danilo Gouveia
> *Sent:* Tuesday, July 31, 2012 12:05 PM
> *To:* rancid-discuss [at] shrubbery
> *Subject:* [rancid] 6500 Doubts
>
>
>
> Hello,
>
>
>
> I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500 and
> 5500) and Foundry switches. The backup of these devices is running to all
> expect one which is a Cisco CatOS 6500. The config into the routed.db is
> hostname:cat5:up and I can ping the switch with the hostname. I can also
> use clogin hostname and I'll be prompted to the (enable) console, however
> when I do rancid-run into the log files I have this message:
>
>
>
> Trying to get all of the configs.
>
> hostname: missed cmd(s): write term all,show port ifindex,show module,dir
> sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
> version,show flash,show running-config,write term,show boot,dir slot1:,show
> inventory raw
>
>
>
> I do have other 6500 in the network which rancid works perfectly only this
> one is not working.
>
>
>
> Any ideas ?
>
>
>
> Thanks in advance,
>
>
>
> --
> Danilo Marques de Gouveia
>
> E-Mail to and from me, in connection with the transaction
> of public business, is subject to the Wyoming Public Records
> Act and may be disclosed to third parties.
>
>
>

--
Atenciosamente / Best Regards,

Danilo Marques de Gouveia
IT - Network Administrator
(19) 3847 8424

pxb368 at motorola

Aug 1, 2012, 12:45 PM

Post #4 of 4 (332 views)
Permalink

Re: 6500 Doubts [In reply to]

There isn't any "verbose" or debug mode I can turn it on to find out where
I'm receiving this error?

On Wed, Aug 1, 2012 at 4:44 PM, Danilo Gouveia <pxb368 [at] motorola> wrote:

> The unique command I had problem was show inventory raw, the other were
> ok, however in both switches (the one it works and the one it doesn't) the
> show inventory raw fails, if I try only show inventory that is ok.
>
> Any other ideas?
>
>
> On Wed, Aug 1, 2012 at 4:33 PM, Daniel Schmidt <daniel.schmidt [at] wyo>wrote:
>
>> Try the commands manually as the rancid user. Maybe one of them is
>> hanging.
>>
>>
>>
>> *From:* rancid-discuss-bounces [at] shrubbery [mailto:
>> rancid-discuss-bounces [at] shrubbery] *On Behalf Of *Danilo Gouveia
>> *Sent:* Tuesday, July 31, 2012 12:05 PM
>> *To:* rancid-discuss [at] shrubbery
>> *Subject:* [rancid] 6500 Doubts
>>
>>
>>
>> Hello,
>>
>>
>>
>> I have RANCID installed and running on a mix of Cisco IOS, CatOS (6500
>> and 5500) and Foundry switches. The backup of these devices is running to
>> all expect one which is a Cisco CatOS 6500. The config into the routed.db
>> is hostname:cat5:up and I can ping the switch with the hostname. I can also
>> use clogin hostname and I'll be prompted to the (enable) console, however
>> when I do rancid-run into the log files I have this message:
>>
>>
>>
>> Trying to get all of the configs.
>>
>> hostname: missed cmd(s): write term all,show port ifindex,show module,dir
>> sup-microcode:,dir sup-bootflash:,dir bootflash:,dir slot0:,show
>> version,show flash,show running-config,write term,show boot,dir slot1:,show
>> inventory raw
>>
>>
>>
>> I do have other 6500 in the network which rancid works perfectly only
>> this one is not working.
>>
>>
>>
>> Any ideas ?
>>
>>
>>
>> Thanks in advance,
>>
>>
>>
>> --
>> Danilo Marques de Gouveia
>>
>> E-Mail to and from me, in connection with the transaction
>> of public business, is subject to the Wyoming Public Records
>> Act and may be disclosed to third parties.
>>
>>
>>
>
>
> --
> Atenciosamente / Best Regards,
>
> Danilo Marques de Gouveia
> IT - Network Administrator
> (19) 3847 8424
>

--
Atenciosamente / Best Regards,

Danilo Marques de Gouveia
IT - Network Administrator
(19) 3847 8424

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads