michael6at at yahoo
Jun 6, 2012, 6:28 AM
Post #15 of 15
(1307 views)
Permalink
|
Hy Guy's
I'am realy Happy it works now for me :)
The problem was the banner, i take * instead of the # and now everything is working
Thanks again for everybody that helped me!
Best Regards
________________________________
Von: Ryan West <rwest [at] zyedge>
An: michael schnatterer <michael6at [at] yahoo>
CC: Adam Korab <adam.korab [at] gmail>; "rancid-discuss [at] shrubbery" <rancid-discuss [at] shrubbery>
Gesendet: 16:24 Donnerstag, 31.Mai 2012
Betreff: Re: [rancid] Rancid enable problem
You're never issuing enable, which is why you need autoenable 0. Post the same output with autoenable 0.
Sent from handheld
On May 31, 2012, at 9:25 AM, "michael schnatterer" <michael6at [at] yahoo> wrote:
Hy,
>Here is my Output:
>
>rancid [at] srv0: /home/rancid/bin/clogin -c show version "hostname"
>
>version
>spawn ssh -c 3des -x -l rancid version
>ssh: Could not resolve hostname version: Name or service not known
>
>Error: Couldn't login: version
>"hostname"
>spawn ssh -c 3des -x -l "User" "hostname"
>"user"@"hostnames" password:
>#######ASA Firewall ########
>ASA-FW>
>ASA-FW> termin terminal length 0
> ^
>ERROR: % Invalid input detected at '^' marker.
>ERROR: Command authorization failed
>ASA-FW>show
>INFO: % Type "show ?" for a list of subcommands
>ASA-FW> exit
>
>
>
>________________________________
> Von: Ryan West <rwest [at] zyedge>
>An: michael schnatterer <michael6at [at] yahoo>
>CC: Adam Korab <adam.korab [at] gmail>; "rancid-discuss [at] shrubbery" <rancid-discuss [at] shrubbery>
>Gesendet: 17:42 Dienstag, 29.Mai 2012
>Betreff: RE: [rancid] Rancid enable problem
>
>
>
>The autoenable should be set to 0 for your config.
>
>-ryan
>
>From:michael schnatterer [mailto:michael6at [at] yahoo]
>Sent: Tuesday, May 29, 2012 10:39 AM
>To: Ryan West
>Cc: Adam Korab; rancid-discuss [at] shrubbery
>Subject: Re: [rancid] Rancid enable problem
>
>.cloginrc
>
>add user user1 {password}
>add user * {rancid}
>
>#Firewall
>add password 193.186.1.2 {userpassword} {enablepassword}
>add autoenable 193.186.1.2 1 or 0
>
>add method * {ssh} {telnet}
>
>
>Thats it, how i said in my further post on every asa firewall work this config
>Best regards and thanks
>
>
>________________________________
>
>Von:Ryan West <rwest [at] zyedge>
>An: michael schnatterer <michael6at [at] yahoo>
>CC: Adam Korab <adam.korab [at] gmail>; "rancid-discuss [at] shrubbery" <rancid-discuss [at] shrubbery>
>Gesendet: 14:49 Dienstag, 29.Mai 2012
>Betreff: Re: [rancid] Rancid enable problem
>
>Paste a sanitized version of your .cloginrc file.
>
>Sent from handheld
>
>On May 29, 2012, at 8:46 AM, "michael schnatterer" <michael6at [at] yahoo> wrote:
>In this case i have an other username as RANCID, but this username is entered in the cloginrc too.
>>
>>add user 193.186.1.2 {User}
>>I login with the User and a password, after that i write enable and enter an other password as the first one.
>>
>>Thanks
>>
>>
>>________________________________
>>
>>Von:Ryan West <rwest [at] zyedge>
>>An: michael schnatterer <michael6at [at] yahoo>; Adam Korab <adam.korab [at] gmail>
>>CC: "rancid-discuss [at] shrubbery" <rancid-discuss [at] shrubbery>
>>Gesendet: 13:56 Dienstag, 29.Mai 2012
>>Betreff: RE: [rancid] Rancid enable problem
>>
>>On Tue, May 29, 2012 at 02:47:51, michael schnatterer wrote:
>>> Subject: Re: [rancid] Rancid enable problem
>>>
>>> Hy Guy's
>>>
>>> Thanks for your help, but it wouldn't work...
>>> I tried with clogin -autoenable 193.186.1.2 but the enable command
>>> doesn't come.
>>> I tried to write the add autoenable 193.186.1.2 1 or 0 on the top of
>>> my cloginrc, without success.
>>>
>>> I'am a little bit frustrated about the problem :(
>>>
>>> have anybody any other idea?
>>>
>>> Realy thanks for every help
>>
>>When you login to the device manually with the RANCID username, what exactly do you type? Is it {username}, followed by {password}, then enable, followed by the same {password}?
>>
>>
>>
>
>
>
|
