lists at theatticnetwork
Apr 17, 2012, 4:02 AM
Views: 1930
Permalink
|
|
Issue with HP Procurve 2910-48G al
|
|
Hey All,
I'm fairly new to Rancid and inherited a setup with mainly HP switches. All
of them work fine but 2 new switches i just added which are HP Procurve
2910-48G al (J9147A) running version W.14.49
When i add them to RANCID i get timeout errors in the logs, but clogin
works fine to log me in.
A similar issue is described here
http://www.gossamer-threads.com/lists/rancid/users/5203 (but its not
exactly the same)
In debug mode, i get a login prompt, then nothing
Switches use TACACS on the same server as RANCID - all switches use SSH
Troubleshooting:
/usr/local/rancid/bin/clogin clswitch1
This works - logs me straight in as the RANCID user and i have full
privileges and can run commands
----------------------------------------------------
/usr/local/rancid/bin/clogin -c "sh run" clswitch1
clswitch1# terminal length 0
Invalid input: 0
clswitch1# logout
Error: TIMEOUT reached
Then drops me back to a shell (I think this is where the whole issue lies)
----------------------------------------------------
When i add the switch to the main config of RANCID
clswitch1:hp:up
When i run /usr/local/rancid/bin/rancid-run i get
<OMITTED>
Trying to get all of the configs.
clswitch1 clogin error: Error: TIMEOUT reached
clswitch1: missed cmd(s): show tech transceivers,show module,show config
status,show system-inform
Trying to get all of the configs.
clswitch1 clogin error: Error: TIMEOUT reached
ation,show system information,show stack,show version,show flash,write
term,show config files
clswitch1: End of run not found
;
=====================================
<OMITTED>
Rinse repeat for all 4 rounds
I looked into using hlogin and when specifying the password, it still hung
at the enter password prompt
I really could use some help on this, I've been researching all done and
can't get anywhere
I'm also finding that if i play with this too much, eventually the switch
locks me out (SSH connection returns identification failure). If i reload
it - its fine - if i dont initiate connections from RANCID its fine for
over 72 hours, but the second i start doing logins through RANCID, the
lockouts start - which is really weird
I read some things about stacking being an issue, so i have changed the
config to "no stack" (we dont need it anyway)
Thoughts much appreciated guys, i look forward to your thoughts to get to
the bottom of this one
Thanks
|
Issue with HP Procurve 2910-48G al
