Mailing List Archive: RANCID: Users

Cisco WLC

Index | Next | Previous | View Threaded

david.mantock at gmx

Jan 25, 2010, 6:33 AM

Post #1 of 11 (9565 views)
Permalink

Cisco WLC

Hello There,

I need to backup a ciscowlc device and this is not the same as IOS or Cat5. I have seen on previous threads that there may exist some scripts for this type of device. Does anyone know where I can access them? ciscwlc I already have but it requires:wlogin.

Thanks in advance.

Best regards,
David
--
Nur noch bis 31.01.2010: DSL-Komplettpaket für 16,99 Euro/mtl.!*
http://portal.gmx.net/de/go/dsl02
_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

rwest at zyedge

Jan 25, 2010, 7:03 AM

Post #2 of 11 (9437 views)
Permalink

Re: Cisco WLC [In reply to]

David,

> -----Original Message-----
> Sent: Monday, January 25, 2010 9:33 AM
> To: Rancid-discuss [at] shrubbery
> Subject: [rancid] Cisco WLC
>
> Hello There,
>
> I need to backup a ciscowlc device and this is not the same as IOS or
> Cat5. I have seen on previous threads that there may exist some scripts
> for this type of device. Does anyone know where I can access them?
> ciscwlc I already have but it requires:wlogin.
>
>
> Thanks in advance.
>
> Best regards,
> David
> --

I got this off the archive a while back and made some small changes for version 5.x and above.

HTH,

-ryan

Attachments:

wlogin (32.7 KB)

smunzani at comcast

Feb 17, 2010, 6:38 AM

Post #3 of 11 (9354 views)
Permalink

Re: Cisco WLC [In reply to]

Ryan West wrote:
> David,
>
>
>> -----Original Message-----
>> From: David Mantock [mailto:david.mantock [at] gmx]
>> Sent: Wednesday, February 17, 2010 7:49 AM
>> Subject: Cisco WLC
>>
>> Hello All,
>>
>> I have seen on this board scripts to backup cisco WLC devices. What is
>> the suggested procedure to include:
>>
>> wlogin and ciscowlc scripts in standard rancid.
>>
>> Do you have to update the normal rancid script to call these?
>>
>> How do you configure router.db file e.g
>>
>> mydevice:ciscowlc:up
>>
> Yup, unless it's a version 5, in which case it would be ciscowlc5. The only difference is that 'show running-config' (version 4) has been moved to 'show run-config commands' in version 5. Pretty sure with basic version check, the proper command file could be parsed.
>
Did you check "show run" on both platforms? It should work on both since
cisco allows short commands as long as its uniq.

Thanks,
Sam
>
>> Any inputs are much appreciated.
>>
>> As Jeremy suggested it would be nice if there was a little Howto as
>> some people already have this working.
>>
>>
> Place wlogin, ciscowlc, and ciscowlc5 in your bin directory of the RANCID install. Then add the following two lines to your $PREFIX/bin/rancid-fe file:
>
> 'cisco-wlc' => 'ciscowlc',
> 'cisco-wlc5' => 'ciscowlc5',
>
> That should be it.
>
> -ryan
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss [at] shrubbery
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
>
>

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

rwest at zyedge

Feb 17, 2010, 6:52 AM

Post #4 of 11 (9362 views)
Permalink

Re: Cisco WLC [In reply to]

Sam,

> -----Original Message-----
> From: Sam Munzani [mailto:smunzani [at] comcast]
> Cc: David Mantock; Rancid-discuss [at] shrubbery;
> Jeremy_Keys [at] memorial
> Subject: Re: [rancid] Re: Cisco WLC
>
> >
> Did you check "show run" on both platforms? It should work on both
> since
> cisco allows short commands as long as its uniq.
>

Here is the issue, version 5:

(Cisco Controller) >show run

Incorrect usage. Use the '?' or <TAB> key to list commands.

(Cisco Controller) >show run-config

Press Enter to continue...

System Inventory
NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:25 APs"

This is not the configuration, but live information, including channel power, clients connected, and internal temperature information which will change often.

(Cisco Controller) >show running-config

Notice: "show running-config" has been changed to be an alias to "show run-config".
Use "show run-config commands" to display the configuration commands.
Press Enter to continue or <Ctrl-Z> to abort...

System Inventory
NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:25 APs"

On a version 4, wlc:

(Cisco Controller) >show run-config commands
System Inventory
NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:12 APs"

(Cisco Controller) >show run-config

Press Enter to continue...

System Inventory
NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:12 APs"

And here is the desired command to get the config:

(Cisco Controller) >show running-config
802.11a cac voice tspec-inactivity-timeout ignore

802.11a cac voice stream-size 84000 max-streams 2

802.11b cac voice tspec-inactivity-timeout ignore

(Cisco Controller) >show run

Incorrect usage. Use the '?' or <TAB> key to list commands.

Unfortunately, like a lot of cannibalized Cisco purchases, there is not a unified CLI.

-ryan

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

smunzani at comcast

Feb 17, 2010, 10:21 AM

Post #5 of 11 (9374 views)
Permalink

Re: Cisco WLC [In reply to]

One would wish cisco would have some consistency :-(...

I guess there is not many options here.

Thanks,
sam
> Sam,
>
>
>> -----Original Message-----
>> From: Sam Munzani [mailto:smunzani [at] comcast]
>> Cc: David Mantock; Rancid-discuss [at] shrubbery;
>> Jeremy_Keys [at] memorial
>> Subject: Re: [rancid] Re: Cisco WLC
>>
>>
>>>
>> Did you check "show run" on both platforms? It should work on both
>> since
>> cisco allows short commands as long as its uniq.
>>
>>
> Here is the issue, version 5:
>
> (Cisco Controller)>show run
>
> Incorrect usage. Use the '?' or<TAB> key to list commands.
>
> (Cisco Controller)>show run-config
>
> Press Enter to continue...
>
> System Inventory
> NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:25 APs"
>
> This is not the configuration, but live information, including channel power, clients connected, and internal temperature information which will change often.
>
> (Cisco Controller)>show running-config
>
> Notice: "show running-config" has been changed to be an alias to "show run-config".
> Use "show run-config commands" to display the configuration commands.
> Press Enter to continue or<Ctrl-Z> to abort...
>
> System Inventory
> NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:25 APs"
>
> On a version 4, wlc:
>
> (Cisco Controller)>show run-config commands
> System Inventory
> NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:12 APs"
>
> (Cisco Controller)>show run-config
>
> Press Enter to continue...
>
> System Inventory
> NAME: "Chassis" , DESCR: "4400 Series WLAN Controller:12 APs"
>
> And here is the desired command to get the config:
>
> (Cisco Controller)>show running-config
> 802.11a cac voice tspec-inactivity-timeout ignore
>
> 802.11a cac voice stream-size 84000 max-streams 2
>
> 802.11b cac voice tspec-inactivity-timeout ignore
>
> (Cisco Controller)>show run
>
> Incorrect usage. Use the '?' or<TAB> key to list commands.
>
> Unfortunately, like a lot of cannibalized Cisco purchases, there is not a unified CLI.
>
> -ryan
>
>
>
>

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

heas at shrubbery

Feb 17, 2010, 4:24 PM

Post #6 of 11 (9345 views)
Permalink

Re: Cisco WLC [In reply to]

Wed, Feb 17, 2010 at 02:21:39PM +0000, Ryan West:
> David,
>
> > -----Original Message-----
> > From: David Mantock [mailto:david.mantock [at] gmx]
> > Sent: Wednesday, February 17, 2010 7:49 AM
> > Subject: Cisco WLC
> >
> > Hello All,
> >
> > I have seen on this board scripts to backup cisco WLC devices. What is
> > the suggested procedure to include:
> >
> > wlogin and ciscowlc scripts in standard rancid.
> >
> > Do you have to update the normal rancid script to call these?
> >
> > How do you configure router.db file e.g
> >
> > mydevice:ciscowlc:up
>
> Yup, unless it's a version 5, in which case it would be ciscowlc5. The only difference is that 'show running-config' (version 4) has been moved to 'show run-config commands' in version 5. Pretty sure with basic version check, the proper command file could be parsed.

see the way the rancid/cisco ios script deals with this problem. run
both, take which ever one works.

> >
> > Any inputs are much appreciated.
> >
> > As Jeremy suggested it would be nice if there was a little Howto as
> > some people already have this working.
> >
>
> Place wlogin, ciscowlc, and ciscowlc5 in your bin directory of the RANCID install. Then add the following two lines to your $PREFIX/bin/rancid-fe file:
>
> 'cisco-wlc' => 'ciscowlc',
> 'cisco-wlc5' => 'ciscowlc5',
>
> That should be it.
>
> -ryan
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss [at] shrubbery
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

alligator94 at laposte

Jul 19, 2013, 12:03 AM

Post #7 of 11 (6131 views)
Permalink

Re: Cisco wlc [In reply to]

Hi,

we run WLC : 7.4.100.60 and rancid : 2.3.8

Regards,

Gilles

De : slavkv [at] gmail [mailto:slavkv [at] gmail] De la part de Slava Mestniy
Envoyé : vendredi 19 juillet 2013 04:33
À : alligator94
Objet : Re: [rancid] Cisco wlc

What type of WLC and software version you are running?

Auzzik

On 19 July 2013 05:37, alligator94 <alligator94 [at] laposte> wrote:

Dear all,

I need to back up a cisco wlc . May you help me to find the right patchs as
I have read a lot of posts about the WLC but no link to download the patchs
and it is not included in the rancid distrib.

Thanks,

Rancid fan

Gilles

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

auzzik at gmail

Jul 19, 2013, 12:30 AM

Post #8 of 11 (6128 views)
Permalink

Re: Cisco wlc [In reply to]

I am running a little bit different software on WLC and rancid is 2.3.6.
I attached file I am using. As I remember we did some small changes in
original file, but not sure now.

Try it. Maybe it will work for you.

Slava

On 19 July 2013 17:03, alligator94 <alligator94 [at] laposte> wrote:

> Hi,****
>
> we run WLC : 7.4.100.60 and rancid : 2.3.8****
>
> Regards,****
>
> Gilles****
>
> ** **
>
> *De :* slavkv [at] gmail [mailto:slavkv [at] gmail] *De la part de* Slava
> Mestniy
> *EnvoyÃ© :* vendredi 19 juillet 2013 04:33
> *Ã€ :* alligator94
> *Objet :* Re: [rancid] Cisco wlc****
>
> ** **
>
> What type of WLC and software version you are running?
>
> Auzzik****
>
> ** **
>
> On 19 July 2013 05:37, alligator94 <alligator94 [at] laposte> wrote:****
>
> Dear all,****
>
> I need to back up a cisco wlc . May you help me to find the right patchs
> as I have read a lot of posts about the WLC but no link to download the
> patchs and it is not included in the rancid distrib.****
>
> ****
>
> Thanks,****
>
> Rancid fan****
>
> Gilles****
>
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss [at] shrubbery
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss****
>
> ** **
>

Attachments:

ciscowlc5 (9.18 KB)

alligator94 at laposte

Jul 19, 2013, 12:46 AM

Post #9 of 11 (6127 views)
Permalink

Re: Cisco wlc [In reply to]

Thanks a lot. I will test it.

BTW, do you also have the wlogin script as it is not part of the rancid software.

Regards,

Gilles

De : slavkv [at] gmail [mailto:slavkv [at] gmail] De la part de Auzzik
EnvoyÃ© : vendredi 19 juillet 2013 09:30
Ã€ : alligator94
Cc : rancid-discuss [at] shrubbery
Objet : Re: [rancid] Cisco wlc

I am running a little bit different software on WLC and rancid is 2.3.6.

I attached file I am using. As I remember we did some small changes in original file, but not sure now.

Try it. Maybe it will work for you.

Slava

On 19 July 2013 17:03, alligator94 <alligator94 [at] laposte> wrote:

Hi,

we run WLC : 7.4.100.60 and rancid : 2.3.8

Regards,

Gilles

De : slavkv [at] gmail [mailto:slavkv [at] gmail] De la part de Slava Mestniy
EnvoyÃ© : vendredi 19 juillet 2013 04:33
Ã€ : alligator94
Objet : Re: [rancid] Cisco wlc

What type of WLC and software version you are running?

Auzzik

On 19 July 2013 05:37, alligator94 <alligator94 [at] laposte> wrote:

Dear all,

I need to back up a cisco wlc . May you help me to find the right patchs as I have read a lot of posts about the WLC but no link to download the patchs and it is not included in the rancid distrib.

Thanks,

Rancid fan

Gilles

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

auzzik at gmail

Jul 19, 2013, 12:55 AM

Post #10 of 11 (6137 views)
Permalink

Re: Cisco wlc [In reply to]

Here you are.

Slava

On 19 July 2013 17:46, alligator94 <alligator94 [at] laposte> wrote:

> Thanks a lot. I will test it.****
>
> ** **
>
> BTW, do you also have the wlogin script as it is not part of the rancid
> software.****
>
> Regards,****
>
> Gilles****
>
> ** **
>
> ** **
>
> *De :* slavkv [at] gmail [mailto:slavkv [at] gmail] *De la part de* Auzzik
> *EnvoyÃ© :* vendredi 19 juillet 2013 09:30
> *Ã€ :* alligator94
> *Cc :* rancid-discuss [at] shrubbery
>
> *Objet :* Re: [rancid] Cisco wlc****
>
> ** **
>
> I am running a little bit different software on WLC and rancid is 2.3.6.**
> **
>
> I attached file I am using. As I remember we did some small changes in
> original file, but not sure now.****
>
> Try it. Maybe it will work for you.****
>
> ** **
>
> Slava****
>
> ** **
>
> On 19 July 2013 17:03, alligator94 <alligator94 [at] laposte> wrote:****
>
> Hi,****
>
> we run WLC : 7.4.100.60 and rancid : 2.3.8****
>
> Regards,****
>
> Gilles****
>
> ****
>
> *De :* slavkv [at] gmail [mailto:slavkv [at] gmail] *De la part de* Slava
> Mestniy
> *EnvoyÃ© :* vendredi 19 juillet 2013 04:33
> *Ã€ :* alligator94
> *Objet :* Re: [rancid] Cisco wlc****
>
> ****
>
> What type of WLC and software version you are running?
>
> Auzzik****
>
> ****
>
> On 19 July 2013 05:37, alligator94 <alligator94 [at] laposte> wrote:****
>
> Dear all,****
>
> I need to back up a cisco wlc . May you help me to find the right patchs
> as I have read a lot of posts about the WLC but no link to download the
> patchs and it is not included in the rancid distrib.****
>
> ****
>
> Thanks,****
>
> Rancid fan****
>
> Gilles****
>
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss [at] shrubbery
> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss****
>
> ****
>
> ** **
>

Attachments:

wlogin (23.8 KB)

ciscowlc5 (9.18 KB)

alligator94 at laposte

Jul 19, 2013, 9:39 AM

Post #11 of 11 (6134 views)
Permalink

Re: Cisco wlc [In reply to]

Hi Slava,

Thanks for your help

It works for me with : WLC : 7.4.100.60 and rancid : 2.3.8

Have a nice weekend

Regards,

Gilles

De : slavkv [at] gmail [mailto:slavkv [at] gmail] De la part de Auzzik
EnvoyÃ© : vendredi 19 juillet 2013 09:55
Ã€ : alligator94
Cc : rancid-discuss
Objet : Re: [rancid] Cisco wlc

Here you are.

Slava

On 19 July 2013 17:46, alligator94 <alligator94 [at] laposte> wrote:

Thanks a lot. I will test it.

BTW, do you also have the wlogin script as it is not part of the rancid software.

Regards,

Gilles

De : slavkv [at] gmail [mailto:slavkv [at] gmail] De la part de Auzzik
EnvoyÃ© : vendredi 19 juillet 2013 09:30
Ã€ : alligator94
Cc : rancid-discuss [at] shrubbery

Objet : Re: [rancid] Cisco wlc

I am running a little bit different software on WLC and rancid is 2.3.6.

I attached file I am using. As I remember we did some small changes in original file, but not sure now.

Try it. Maybe it will work for you.

Slava

On 19 July 2013 17:03, alligator94 <alligator94 [at] laposte> wrote:

Hi,

we run WLC : 7.4.100.60 and rancid : 2.3.8

Regards,

Gilles

De : slavkv [at] gmail [mailto:slavkv [at] gmail] De la part de Slava Mestniy
EnvoyÃ© : vendredi 19 juillet 2013 04:33
Ã€ : alligator94
Objet : Re: [rancid] Cisco wlc

What type of WLC and software version you are running?

Auzzik

On 19 July 2013 05:37, alligator94 <alligator94 [at] laposte> wrote:

Dear all,

I need to back up a cisco wlc . May you help me to find the right patchs as I have read a lot of posts about the WLC but no link to download the patchs and it is not included in the rancid distrib.

Thanks,

Rancid fan

Gilles

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss [at] shrubbery
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads