Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/qmail/users/ en-us (c) Gossamer Threads Inc. All rights reserved. 16 May 2008 09:43:00 -0800 120 75 23 http://www.gossamer-threads.com/lists/qmail/users/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg I've encountered a strange problem twice in the last few months. My setup for this box is a pretty standard setup. I've got qmail-pop3d running unde 15 May 2008 20:29:01 -0800 http://www.gossamer-threads.com/lists/qmail/users/135076 I have one system running qmail in my DMZ, forwarding to another on my internal net. When I send a big message (>10MB or so) to myself from outside 14 May 2008 15:27:43 -0800 http://www.gossamer-threads.com/lists/qmail/users/135066 Edilson Azevedo wrote: > Hi folks! > > I have a hard question, hehe. > > I've a qmail-ldap and to backup my messages, I configure the > QUEUE_EXT 14 May 2008 00:19:19 -0800 http://www.gossamer-threads.com/lists/qmail/users/135063 One of my qmail server has a problem in smtproutes. In my other qmail server, I have this format in smtproutes foo.com:10.5.0.1 Now, I put the same 13 May 2008 19:09:53 -0800 http://www.gossamer-threads.com/lists/qmail/users/135060 ¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø¡Ø Á¤Ç° ºñ.¾Æ±×.¶ó ¾¾¾Ë.¸®½º ..100% Á¤Ç°¿ø»êÁö Á÷¹è¼Û! ¾à±¹¿¡, ³³Ç°ÇÏ´Â Á¤Ç°À». µå¸³´Ï´Ù..!!!! ³²ÀÚÀÇ 13 May 2008 16:27:33 -0800 http://www.gossamer-threads.com/lists/qmail/users/135059 I find the sudden flow of autoresponder messages to the list highly amusing. Does anybody recognize the autoresponder responsible? - Harald 13 May 2008 08:57:43 -0800 http://www.gossamer-threads.com/lists/qmail/users/135057 This message is a reply to a boxtrapper verifcation message. No action is needed on your part. The headers of the message sent from your address are 13 May 2008 08:16:55 -0800 http://www.gossamer-threads.com/lists/qmail/users/135056 The message you sent requires that you verify that you are a real live human being and not a spam source. To complete this verification, simply repl 13 May 2008 08:10:29 -0800 http://www.gossamer-threads.com/lists/qmail/users/135055 When qmail does its DNS lookups, it uses a small 512 byte response buffer. If the responses are bigger than that, the lookups fail. In practice that 13 May 2008 07:31:23 -0800 http://www.gossamer-threads.com/lists/qmail/users/135054 The message you sent requires that you verify that you are a real live human being and not a spam source. To complete this verification, simply repl 13 May 2008 01:27:13 -0800 http://www.gossamer-threads.com/lists/qmail/users/135050 Hi, We are using qmail with maia/amavis/spamassasin. It looks like this: I-net->qmail:25->amavis:10024->qmail:10025-> Now some recepients must bypa 12 May 2008 22:46:26 -0800 http://www.gossamer-threads.com/lists/qmail/users/135048 Dear all, Ive using qmail for about 3 years now and as the years gone by im now administering close to 600 mailboxes. Is there a way to extract the 12 May 2008 22:39:03 -0800 http://www.gossamer-threads.com/lists/qmail/users/135047 The message you sent requires that you verify that you are a real live human being and not a spam source. To complete this verification, simply repl 12 May 2008 16:57:20 -0800 http://www.gossamer-threads.com/lists/qmail/users/135045 Your message could not be delivered. The User is out of space. Please try to send your message again at a later time. 12 May 2008 16:06:09 -0800 http://www.gossamer-threads.com/lists/qmail/users/135044 Hi List, i have a file which contain the IP which i want to DENY from the SMTP level using "tcp.smtp"/tcpserver. The file is a continuous file. Is it 08 May 2008 23:01:23 -0800 http://www.gossamer-threads.com/lists/qmail/users/135037 Hello all, I'm sorry for posting to all three lists with what might be a subject a bit OT. Happens that Qmail, derivated Qmail-LDAP and DJBDNS are t 08 May 2008 14:33:24 -0800 http://www.gossamer-threads.com/lists/qmail/users/135034 I'm posting this for reference as well as asking any SELinux experts to provide feedback. With SELinux enabled, apache/php cannot use qmail's sendmai 07 May 2008 20:44:13 -0800 http://www.gossamer-threads.com/lists/qmail/users/135030 I'm trying to allow apache/php to send email via qmail's sendmail program but SELinux (on CentOS v5.1) is giving me a bit of a hassle. I will not dis 06 May 2008 17:38:33 -0800 http://www.gossamer-threads.com/lists/qmail/users/135020 I wish people would disable their auto responders and challenge/response anti-spam facilities for messages originating from mailing lists... Starts 06 May 2008 14:49:27 -0800 http://www.gossamer-threads.com/lists/qmail/users/135016 Hello ALL, Can anyone suggest me that how to stop backscattering in qmail with vpopmail. 06 May 2008 03:48:39 -0800 http://www.gossamer-threads.com/lists/qmail/users/135007 Hi All We are running qmail 1.03 on a redhat box. Some of our clients use third party spam/virus filtering services and others do not. For the on 06 May 2008 03:04:17 -0800 http://www.gossamer-threads.com/lists/qmail/users/135006 Hello, Since a few years, I've been using this basic qmail-smtpd / cvm validation setup on some servers based on qmail + vmailmgr: http://qmail.omnis 05 May 2008 14:56:49 -0800 http://www.gossamer-threads.com/lists/qmail/users/135002 I have a problem in that my (hobbyish) server is being overloaded by spam connections. I can reduce the number of concurrent incoming connections to k 01 May 2008 20:13:41 -0800 http://www.gossamer-threads.com/lists/qmail/users/135014 Hello, Do you know if there is a way to create automated rules of BCC all outgoing emails from some people to a specific mail box ? Thanks for you 01 May 2008 16:32:17 -0800 http://www.gossamer-threads.com/lists/qmail/users/134999 I haven't posted in a while, but just wanted to let everyone know I'm leaving the list. I haven't done much qmail support in the past few years so be 01 May 2008 13:33:22 -0800 http://www.gossamer-threads.com/lists/qmail/users/134993 HI List, I M very much new to this list. can anyone guide me to in filtering mail using maildrop. on the based on subject line can i filter mail on th 01 May 2008 10:36:41 -0800 http://www.gossamer-threads.com/lists/qmail/users/134990 Hello, Some of my servers were blacklisted recently not because they were sending spams, but because there were generating "too many errors". The one 01 May 2008 05:49:03 -0800 http://www.gossamer-threads.com/lists/qmail/users/134984 Hello list, I have a tarpit set up with a high priority, 99, mx record to catch a few spammers. I had an issue where an Exchange 2003 server was tr 01 May 2008 00:14:28 -0800 http://www.gossamer-threads.com/lists/qmail/users/134983 Dear all seeking ur advice on how to go about this problem My superior is always being bugged with *Training* invitations etc for the department. F 30 Apr 2008 02:03:33 -0800 http://www.gossamer-threads.com/lists/qmail/users/134980 Version 0.97 of qmail-autoresponder is now available at: http://untroubled.org/qmail-autoresponder/ ------------------------------------------ 28 Apr 2008 15:47:59 -0800 http://www.gossamer-threads.com/lists/qmail/users/134976 Dear all, Few on my users get random duplicate messages this is reflected in outlook and webmail client as well. I checked the logs and it shows succ 27 Apr 2008 22:04:19 -0800 http://www.gossamer-threads.com/lists/qmail/users/134972 Does anyone has a script/procedure how to delete an email from a certain date. Example: I have 30,000 emails in cur directory and want to delete ema 27 Apr 2008 19:28:48 -0800 http://www.gossamer-threads.com/lists/qmail/users/134971 I figured out the problem. I forgot to take into account a message's size increase when encoding attachments. 27 Apr 2008 06:07:01 -0800 http://www.gossamer-threads.com/lists/qmail/users/134970 qmail determines the message size based on the message's size on disk. On my server the size on disk is 1.35 times larger than the actual message siz 26 Apr 2008 20:33:49 -0800 http://www.gossamer-threads.com/lists/qmail/users/134969 Hi Friends, After implementing procmail my mails are stucking in th queue. here is the .procmailrc file MAILDIR=/home/vpopmail/domains/example.com/ta 26 Apr 2008 04:04:52 -0800 http://www.gossamer-threads.com/lists/qmail/users/134961 Recently I noticed that just a couple instances of qmail-smtpd were bringing the processor utilization to 100% on a dual P3 550MHz server with 768mb R 24 Apr 2008 13:48:53 -0800 http://www.gossamer-threads.com/lists/qmail/users/134955 Hi there: I was looking around for this: I want an alias like this: /var/qmail/alias/.qmail-virtualdomain-user.ext This doesn't work for me. All the 24 Apr 2008 08:02:53 -0800 http://www.gossamer-threads.com/lists/qmail/users/134949 I just want to clearify the following. In the RFC 2821 I can read that: "The end of mail data indicator also confirms the mail transaction and tells 23 Apr 2008 22:36:06 -0800 http://www.gossamer-threads.com/lists/qmail/users/134940 I run a server that's currently on the unlucky receiving end of several thousand bounce messages per day due to some spammer or group thereof forgin 23 Apr 2008 11:32:05 -0800 http://www.gossamer-threads.com/lists/qmail/users/134930 Take a look at yourself :) SlsspVskXDY 23 Apr 2008 11:22:54 -0800 http://www.gossamer-threads.com/lists/qmail/users/134936 Olá D.Hibig, It couldn't be so easy :) I followed your instructions and ... WORKED, of course. Many thanks indeed! Tuesday, April 22, 2008, 7:25:2 22 Apr 2008 15:53:44 -0800 http://www.gossamer-threads.com/lists/qmail/users/134922 Olá Qmail, Is it possible to forward all messages from one domain to another host maintaining the same domain? For example: user@domain3.com (at hos 22 Apr 2008 14:17:11 -0800 http://www.gossamer-threads.com/lists/qmail/users/134921 Hello to the list, I am setting up a new qmail server that will act as a SMTP-OUT only. We want everything signed with DKIM. I already install 22 Apr 2008 12:28:02 -0800 http://www.gossamer-threads.com/lists/qmail/users/134918 * Hi List, I have posted one query regarding "spam tagged mail delivered to a seperate ID -- I want a system wide configuration, which will filter the 21 Apr 2008 00:35:28 -0800 http://www.gossamer-threads.com/lists/qmail/users/134916 Hi List, today, I was confronted with a critical problem :( My qmail server hosts the domains xyz.com, the address info@xyz.com is forwarded to a d 20 Apr 2008 23:49:12 -0800 http://www.gossamer-threads.com/lists/qmail/users/134915 Hi List, I have posted one query regarding "spam tagged mail delivered to a seperate ID -- I want a system wide configuration, which will filter the q 20 Apr 2008 10:19:04 -0800 http://www.gossamer-threads.com/lists/qmail/users/134913 I am looking for a way to temporarily, may be for 5 mins, block an IP that is hitting my MTA's (qmail) smtp port lets say 20 times in last 5 mins. I 20 Apr 2008 06:07:02 -0800 http://www.gossamer-threads.com/lists/qmail/users/134912 I'm lucky enough to have a system wherein OpenSSH updates only utmpx, and not also utmp. This prevents qbiff from firing. Just in case it's useful 18 Apr 2008 20:35:10 -0800 http://www.gossamer-threads.com/lists/qmail/users/134908 *Hi List, Is it possible to redirect all the spam tagged mail will be delivered to a separate id. i'm using qmail+qmail-scanner+vpopmail /\ Tarak * 18 Apr 2008 02:53:50 -0800 http://www.gossamer-threads.com/lists/qmail/users/134905 A month after I installed qmail, I noticed these inside my queue: 17 Apr 2008 05:08:40 GMT #171089272 3989 <> remote fulvio.davie@kohnke 18 Apr 2008 00:42:00 -0800 http://www.gossamer-threads.com/lists/qmail/users/134904 Hi Everyone, As you've seen lately, there has been a large response to my queries about Valid RCPTTO. Thank You everyone for your informative 17 Apr 2008 21:22:40 -0800 http://www.gossamer-threads.com/lists/qmail/users/134903 ÓÌÕÖÂÁ ÄÏÓÔÁ×ËÉ òåëìáíîùè üìåëôòïîîùè ðéóåí   8   (9ïú)   7 ï 7   9 2 9ú   ÏÄÎÏËÒÁÔÎÁÑ ÄÏÓÔÁ×ËÁ ÐÏ "âÉÚÎÅÓ-íÏÓË×Á" 1,57 Í 16 Apr 2008 11:06:29 -0800 http://www.gossamer-threads.com/lists/qmail/users/134897 Hello all, Just to say that i have an early draft howto about setting Qmail and DSPAM. There are several install methods covered, although i still 16 Apr 2008 06:06:15 -0800 http://www.gossamer-threads.com/lists/qmail/users/134892 Hello, Although envelope scanning itself is old news, and because it's getting harder every day to get patches to apply cleanly against each other, 14 Apr 2008 08:54:47 -0800 http://www.gossamer-threads.com/lists/qmail/users/134882 Hello all, With the not so recent announcement from DJB, about his software licensing change, people, and i too, began to think about pre-compiled 14 Apr 2008 05:06:16 -0800 http://www.gossamer-threads.com/lists/qmail/users/134881 Hi All, We currently run Qmail on 2 servers here at work. In the ever-ensuing battle of Spam, I am trying to tighten MX2 down so it cannot be abus 13 Apr 2008 18:08:33 -0800 http://www.gossamer-threads.com/lists/qmail/users/134872 Hi All, I m bit irritated because of unknown recipient in my domain. i'm getting lots of mail on unknow recipient of my domain . for example abc.com i 13 Apr 2008 09:31:34 -0800 http://www.gossamer-threads.com/lists/qmail/users/134867 ÂÙÓÔÒÏ É ÄÅÛÅ×Ï ïæïòíìåîéå ûåîçåîóëéè ÷éú 8 (916) 785-46-10,   8 (906) 778-09-29 éÓÐÁÎÉÑ ÚÁ 5 ÄÎÅÊ - 150 Å×ÒÏ. éÔÁÌÉÑ ÚÁ 5 ÄÎÅÊ - 250 Å×ÒÏ. éÔÁÌÉ 12 Apr 2008 03:32:50 -0800 http://www.gossamer-threads.com/lists/qmail/users/134866 I just upgraded my qmail installation to netqmail 1.06 and then applied the qmail-realrcptto patch, from http://code.dogmap.org/qmail/, in the hopes o 11 Apr 2008 07:21:03 -0800 http://www.gossamer-threads.com/lists/qmail/users/134863 I have a Red Hat Enterprise Linux ES 4 system, on which I installed qmail from source, using netqmail 1.0.5, ucspi-tcp and daemontools, according to L 10 Apr 2008 07:32:26 -0800 http://www.gossamer-threads.com/lists/qmail/users/134858 I use qmail-scanner in my qmail to check spam. I use spamassassin and clamav. However, I check the logs of my mail and see the ff: Clear:RC:0(90.2 09 Apr 2008 17:34:46 -0800 http://www.gossamer-threads.com/lists/qmail/users/134902 Hello. I have recently become the administrator of some neglected Plesk webhosting & email servers. As you might be aware, Plesk uses qmail with some 09 Apr 2008 17:22:24 -0800 http://www.gossamer-threads.com/lists/qmail/users/134853 Any opinions/preferences on either Bruce Guenter's vmailmgr or Inter7's vpopmail? I'll be using one of them with Courier-IMAP (and its POP3). Anyone 09 Apr 2008 16:42:23 -0800 http://www.gossamer-threads.com/lists/qmail/users/134852 I'm trying to set up an authenticated SMTP server. I have the freebsd qmail 1.03_6 port, built with the SMTP_AUTH_PATCH config option. My "run" scr 08 Apr 2008 14:39:34 -0800 http://www.gossamer-threads.com/lists/qmail/users/134849 One of my EZMLM mailing list owners has asked me to ban email he receives. It always comes in the form 'boris-xx@mail.com' where 'xx' varies, but the 08 Apr 2008 07:50:43 -0800 http://www.gossamer-threads.com/lists/qmail/users/134847 Hi there: Is it possible to rewrite email headers for qmail-smtpd, as new-inject does for local queue?. Cheers, Ibon. 07 Apr 2008 02:15:01 -0800 http://www.gossamer-threads.com/lists/qmail/users/134843 Hello, I have set a virtual domain which works as intended. I send newsletters and have the bounces be sent to errors-user%domain@virtualdomain.com 06 Apr 2008 21:16:07 -0800 http://www.gossamer-threads.com/lists/qmail/users/134838 Our Chemists' presents all medications that you need to recover your health at low price. We work all over the world with clients from America, Europ 05 Apr 2008 22:30:40 -0800 http://www.gossamer-threads.com/lists/qmail/users/134837 Hello, I recently made a ghost of my current mailserver onto a new harddrive for a new server.. put the newserver online - it boots fine.. Im not sur 04 Apr 2008 14:16:17 -0800 http://www.gossamer-threads.com/lists/qmail/users/134844 Merhaba Beyfendi; Tüm Türkiye'de sanayi ve ticaret dallarýnda çalýþan esnafýn iþçinin memurun ilan verip müþteri arayabilecekleri Sektörel Ticari web 04 Apr 2008 06:26:38 -0800 http://www.gossamer-threads.com/lists/qmail/users/134833 Hello, I need to delete mails depends on subject. A have a lot of returned mail from fake addressess. How can I do it? -- Regards, Bc. Radek K 03 Apr 2008 14:17:13 -0800 http://www.gossamer-threads.com/lists/qmail/users/134830 I'm getting time outs from remote clients. Sending mail from the server itself processes quickly. I have done all of the normal fixes for slow SMTP. I 03 Apr 2008 11:18:16 -0800 http://www.gossamer-threads.com/lists/qmail/users/134828 Hi, this is a new problem for me. I've set up a half-dozen servers just like this one in the past without any trouble. The basic setup is: Netqmail-1. 02 Apr 2008 14:52:43 -0800 http://www.gossamer-threads.com/lists/qmail/users/134825 Hi all, I am really needing help. I did re-read and re-made everything, but the results are the same: when I try to receive an email from outside, th 02 Apr 2008 11:40:18 -0800 http://www.gossamer-threads.com/lists/qmail/users/134824 Hello, today i have weird problem with qmail. Mails are accepted(qmail-smtpd), but is not delivered localy (and remotely) qmail-send log last lines( 02 Apr 2008 05:20:30 -0800 http://www.gossamer-threads.com/lists/qmail/users/134823 Hi everybody, I would like to search my question on list's files before post here, but I didn't find out where to look for? Can anyone help me out 31 Mar 2008 05:45:26 -0800 http://www.gossamer-threads.com/lists/qmail/users/134814 Hi there: My name is Ibon, and I'm "fighting" with a fresh installation of QMail. I'm trying to set up a Debian Etch testing server (for later use i 31 Mar 2008 05:22:38 -0800 http://www.gossamer-threads.com/lists/qmail/users/134813 " õðòïýåîîáñ óéóôåíá îáìïçïïâìïöåîéñ ÷ 2008 çïäõ " 4 ÁÐÒÅÌÑ 2008 ÇÏÄÁ õÞÅÂÎÙÊ ãÅÎÔÒ æôë [þ95] 5 09207 6 ÐÒÏ×ÏÄ 31 Mar 2008 00:34:34 -0800 http://www.gossamer-threads.com/lists/qmail/users/134812 Dear all, Whenever any of our users send a huge mail around 9 MB the receiving end receives the mail over and over again around 15 times. Please let 30 Mar 2008 23:26:52 -0800 http://www.gossamer-threads.com/lists/qmail/users/134811 I have a test implementation up of a new email system I want to switch to, using qmail, dovecot, perdition and squirrelmail. One of the problems I 28 Mar 2008 14:08:02 -0800 http://www.gossamer-threads.com/lists/qmail/users/134808 Having set up tcp.smtp with a large number of dynamic IP addresses to block from sending email, I recently began to understand more about resolving ho 28 Mar 2008 07:05:25 -0800 http://www.gossamer-threads.com/lists/qmail/users/134803 Dear List, doing some experimenting before my qmail server goes into production... today I did $ ls >lsout $ /var/qmail/bin/qmail-i 27 Mar 2008 12:20:28 -0800 http://www.gossamer-threads.com/lists/qmail/users/134800 Greetings, I am trying to get domainkeys to work with my netqmail installation on linux. I am using this howto ( http://jeremy.kister.net/howto/dk.ht 25 Mar 2008 16:08:43 -0800 http://www.gossamer-threads.com/lists/qmail/users/134798 Hi, triggered by a comment of Markus Stumpf (and his code snipset), I have upgraded my qmail SMTP Authentication patches: * qmail-authentication-0.6 25 Mar 2008 08:01:29 -0800 http://www.gossamer-threads.com/lists/qmail/users/134797 Hello All, I am using "qmail-1.03" and I have two queries regarding configurations. I am running mail server behind firewall and hosting is outside a 23 Mar 2008 22:38:23 -0800 http://www.gossamer-threads.com/lists/qmail/users/134793 I've been starting to play with DKIM signing my outgoing mail. I have a process that seems to work fairly well, even if it is a little kludgy. As 23 Mar 2008 12:54:47 -0800 http://www.gossamer-threads.com/lists/qmail/users/134791 Hi All qmail lovers, i want switch from 25 to ssl enable 465 , what are necessary steps i should take to make that up and running. special request to 22 Mar 2008 09:15:11 -0800 http://www.gossamer-threads.com/lists/qmail/users/134787 Hi List, I have enabled /bin/checkpassword in qmail-smtpd/run file , after that but my mail client is keep asking for password, i' m giving the corre 21 Mar 2008 10:39:04 -0800 http://www.gossamer-threads.com/lists/qmail/users/134785 Hi List , I'm trying to make checkpassword, i'm getting the following error meesage "/usr/bin/ld: errno: *TLS definition in /lib/libc.so.6 section* .* 21 Mar 2008 08:54:36 -0800 http://www.gossamer-threads.com/lists/qmail/users/134781 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi All, sorry as this is slightly offtopic, but I dont know where to ask else ;) As some users compla 21 Mar 2008 05:49:14 -0800 http://www.gossamer-threads.com/lists/qmail/users/134780 Hi list, i have asked this question before also, nobody has given me any clue or suggession, my query was simple--- untill and unless user send a AUTH 21 Mar 2008 01:59:18 -0800 http://www.gossamer-threads.com/lists/qmail/users/134778 Hi List, i have configured two instance in my qmail server which is running on 25 & 587, both port port are working fine.. But the issue is when i'mm 19 Mar 2008 06:23:32 -0800 http://www.gossamer-threads.com/lists/qmail/users/134769 Greetings, When I send an email to myself, in the header information it says the following... Return-Path: <jason@jasoncarson.ca> Delivered-To: jas 16 Mar 2008 17:02:36 -0800 http://www.gossamer-threads.com/lists/qmail/users/134763 Hello! How do people install netqmail on Debian systems? The .debs linked to from <http://qmail.org/top.html> -- ``You can download netqmail 1.06 (R 16 Mar 2008 15:38:30 -0800 http://www.gossamer-threads.com/lists/qmail/users/134761 A quick question: Has anybody run qmail on ZFS? I mean having /var/qmail on a ZFS volume? Is there any reason to doubt it should work or be reliable? 14 Mar 2008 11:32:31 -0800 http://www.gossamer-threads.com/lists/qmail/users/134754 Hi list, we have 4 to 5 users who wants to use the mail server from outside the network using DSL connection. i have one qmail-server , but t 13 Mar 2008 04:39:42 -0800 http://www.gossamer-threads.com/lists/qmail/users/134748 Hello. Im trying to install three different qmail servers on one box, which have multiple ips. I installed and configured three instances of qmail, t 12 Mar 2008 02:12:38 -0800 http://www.gossamer-threads.com/lists/qmail/users/134737 Hi everybody, I developed a simple PHP script to send a newsletter via qmail-queue using VERP. I prepare the envelope (that I will pipe to fd 12 Mar 2008 01:10:46 -0800 http://www.gossamer-threads.com/lists/qmail/users/134738 Just installed ezmlm but don't know if it can do the ff: 1. How to put a moderator in every mailing-lists 2. Can they add a member only using email a 11 Mar 2008 20:57:05 -0800 http://www.gossamer-threads.com/lists/qmail/users/134735 Hi List, Is there any tool available for analyzing in details qmail's log. qmail-send, qmail-smtpd, qmail-pop3, qmail-queue ........... apart from Qma 11 Mar 2008 03:46:01 -0800 http://www.gossamer-threads.com/lists/qmail/users/134721