perl at greerga
Jun 26, 2012, 12:20 AM
Post #1 of 1
(21 views)
Permalink
|
|
Smoke [blead] v5.17.1-127-g7878705 FAIL(m) linux 3.2.0-25-generic [debian] (x86_64/8 cpu)
|
|
Smoke logs available at http://m-l.org/~perl/smoke/perl/
Automated smoke report for 5.17.2 patch 78787052b6a68c0f54cfa983a69c44276de9daa4 v5.17.1-127-g7878705
zwei: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (GenuineIntel 1600MHz) (x86_64/8 cpu)
on linux - 3.2.0-25-generic [debian]
using g++ version 4.6.3
smoketime 4 minutes 40 seconds (average 1 minute 10 seconds)
Summary: FAIL(m)
O = OK F = Failure(s), extended report at the bottom
X = Failure(s) under TEST but not under harness
? = still running or test results not (yet) available
Build failures during: - = unknown or N/A
c = Configure, m = make, M = make (after miniperl), t = make test-prep
v5.17.1-127-g7878705 Configuration (common) -Accflags=-DPERL_POISON -Dcc=g++
----------- ---------------------------------------------------------
m m
m m -Duseithreads
| +--------- -DDEBUGGING
+----------- no debugging
Locally applied patches:
uncommitted-changes
SMOKE78787052b6a68c0f54cfa983a69c44276de9daa4
Testsuite was run only with 'harness'
Compiler messages(gcc):
try.c: In function ‘int main()’:
try.c:36:10: warning: ignoring return value of ‘int pipe(int*)’, declared with attribute warn_unused_result [-Wunused-result]
try.c:37:10: warning: ignoring return value of ‘int pipe(int*)’, declared with attribute warn_unused_result [-Wunused-result]
try.c:53:35: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
try.c:66:23: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
try.c:72:35: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
try.c:78:21: warning: ignoring return value of ‘ssize_t read(int, void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
doio.c: In function ‘void S_exec_failed(const char*, int, int)’:
doio.c:1378:43: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
doio.c: In function ‘PerlIOl** Perl_nextargv(GV*)’:
doio.c:875:46: warning: ignoring return value of ‘int fchown(int, __uid_t, __gid_t)’, declared with attribute warn_unused_result [-Wunused-result]
pp_ctl.c: In function ‘OP* Perl_pp_goto()’:
pp_ctl.c:2874:8: warning: variable ‘newsp’ set but not used [-Wunused-but-set-variable]
pp_ctl.c:2875:7: warning: variable ‘gimme’ set but not used [-Wunused-but-set-variable]
numeric.c: In function ‘NV Perl_my_atof(const char*)’:
numeric.c:854:33: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
numeric.c:855:58: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
regexec.c: In function ‘char* S_find_byclass(regexp*, const regnode*, char*, const char*, regmatch_info*)’:
regexec.c:1607:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1613:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1618:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1628:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1638:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1643:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1654:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1661:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1673:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1680:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1699:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1706:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1724:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1731:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1750:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:1768:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
util.c: In function ‘char* S_write_no_mem()’:
util.c:68:34: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
pp.c: In function ‘OP* Perl_pp_study()’:
pp.c:653:29: warning: variable ‘s’ set but not used [-Wunused-but-set-variable]
regexec.c: In function ‘I32 S_regmatch(regmatch_info*, regnode*)’:
regexec.c:3788:7: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3864:9: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3868:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3870:9: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3874:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3876:9: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3879:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3964:7: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3964:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:3964:1: warning: variable ‘throw_away’ set but not used [-Wunused-but-set-variable]
regexec.c:6039:2: warning: variable ‘sp’ set but not used [-Wunused-but-set-variable]
regexec.c:3156:5: warning: variable ‘newsp’ set but not used [-Wunused-but-set-variable]
regexec.c:3156:5: warning: variable ‘multicall_cop’ set but not used [-Wunused-but-set-variable]
regexec.c: In function ‘I32 S_regrepeat(const regexp*, const regnode*, I32, int)’:
regexec.c:6232:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6277:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6329:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6378:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6431:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6464:6: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
perlio.c: In function ‘void S_more_refcounted_fds(int)’:
perlio.c:2354:38: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
perlio.c: In function ‘void PerlIO_debug(const char*, ...)’:
perlio.c:497:43: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
sv.c: In function ‘void Perl_sv_vcatpvfn(SV*, const char*, STRLEN, __va_list_tag (*)[1], SV**, I32, bool*)’:
sv.c:10128:41: warning: ignoring return value of ‘char* gcvt(double, int, char*)’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:10977:53: warning: ignoring return value of ‘char* gcvt(double, int, char*)’, declared with attribute warn_unused_result [-Wunused-result]
mg_vtable.h:94:54: warning: ‘PL_magic_vtable_names’ initialized and declared ‘extern’ [enabled by default]
sv.c: In function ‘char* Perl_sv_2pv_flags(SV*, STRLEN*, I32)’:
sv.c:2772:39: warning: ignoring return value of ‘char* gcvt(double, int, char*)’, declared with attribute warn_unused_result [-Wunused-result]
sv.c:2960:39: warning: ignoring return value of ‘char* gcvt(double, int, char*)’, declared with attribute warn_unused_result [-Wunused-result]
toke.c: In function ‘bool S_pmflag(const char*, U32*, char**, char*)’:
toke.c:9063:13: warning: field precision specifier ‘.*’ expects argument of type ‘int’, but argument 2 has type ‘STRLEN {aka long unsigned int}’ [-Wformat]
regcomp.c: In function ‘void S_dump_trie(const _reg_trie_data*, HV*, AV*, U32)’:
regcomp.c:1054:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
regcomp.c: In function ‘void S_dump_trie_interim_list(const _reg_trie_data*, HV*, AV*, U32, U32)’:
regcomp.c:1145:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
regcomp.c: In function ‘void S_dump_trie_interim_table(const _reg_trie_data*, HV*, AV*, U32, U32)’:
regcomp.c:1203:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
regcomp.c: In function ‘REGEXP* Perl_re_op_compile(SV**, int, OP*, const regexp_engine*, REGEXP*, bool*, U32, U32)’:
regcomp.c:6441:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
regcomp.c: In function ‘SV* Perl_reg_named_buff_nextkey(REGEXP*, U32)’:
regcomp.c:6589:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
regcomp.c: In function ‘void Perl_pregfree2(REGEXP*)’:
regcomp.c:13462:5: warning: variable ‘re_debug_flags’ set but not used [-Wunused-but-set-variable]
numeric.c: In function ‘NV Perl_my_atof(PerlInterpreter*, const char*)’:
pp.c: In function ‘OP* Perl_pp_study(PerlInterpreter*)’:
toke.c: In function ‘bool S_pmflag(PerlInterpreter*, const char*, U32*, char**, char*)’:
toke.c:9063:13: warning: field precision specifier ‘.*’ expects argument of type ‘int’, but argument 3 has type ‘STRLEN {aka long unsigned int}’ [-Wformat]
perlio.c: In function ‘void S_more_refcounted_fds(PerlInterpreter*, int)’:
perlio.c:488:56: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
regexec.c: In function ‘char* S_find_byclass(PerlInterpreter*, regexp*, const regnode*, char*, const char*, regmatch_info*)’:
doio.c: In function ‘void S_exec_failed(PerlInterpreter*, const char*, int, int)’:
doio.c: In function ‘PerlIOl** Perl_nextargv(PerlInterpreter*, GV*)’:
util.c: In function ‘char* S_write_no_mem(PerlInterpreter*)’:
perl.c: In function ‘void S_init_tls_and_interp(PerlInterpreter*)’:
perl.c:103:2: warning: ignoring return value of ‘ssize_t write(int, const void*, size_t)’, declared with attribute warn_unused_result [-Wunused-result]
pp_ctl.c: In function ‘OP* Perl_pp_goto(PerlInterpreter*)’:
sv.c: In function ‘DIR* Perl_dirp_dup(PerlInterpreter*, DIR*, CLONE_PARAMS*)’:
sv.c:11424:26: warning: ignoring return value of ‘int fchdir(int)’, declared with attribute warn_unused_result [-Wunused-result]
regexec.c: In function ‘I32 S_regmatch(PerlInterpreter*, regmatch_info*, regnode*)’:
regexec.c:3788:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
sv.c: In function ‘void Perl_sv_vcatpvfn(PerlInterpreter*, SV*, const char*, STRLEN, __va_list_tag (*)[1], SV**, I32, bool*)’:
regexec.c: In function ‘I32 S_regrepeat(PerlInterpreter*, const regexp*, const regnode*, I32, int)’:
regexec.c:6232:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6277:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6329:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6378:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6431:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
regexec.c:6464:1: warning: variable ‘ok’ set but not used [-Wunused-but-set-variable]
sv.c: In function ‘char* Perl_sv_2pv_flags(PerlInterpreter*, SV*, STRLEN*, I32)’:
regcomp.c: In function ‘void S_dump_trie(PerlInterpreter*, const _reg_trie_data*, HV*, AV*, U32)’:
regcomp.c: In function ‘void S_dump_trie_interim_list(PerlInterpreter*, const _reg_trie_data*, HV*, AV*, U32, U32)’:
regcomp.c: In function ‘void S_dump_trie_interim_table(PerlInterpreter*, const _reg_trie_data*, HV*, AV*, U32, U32)’:
regcomp.c: In function ‘REGEXP* Perl_re_op_compile(PerlInterpreter*, SV**, int, OP*, const regexp_engine*, REGEXP*, bool*, U32, U32)’:
regcomp.c: In function ‘SV* Perl_reg_named_buff_nextkey(PerlInterpreter*, REGEXP*, U32)’:
regcomp.c: In function ‘void Perl_pregfree2(PerlInterpreter*, REGEXP*)’:
--
Report by Test::Smoke v1.44 build 1285 running on perl 5.14.2
(Reporter v0.035 / Smoker v0.045)
|
