Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/ntop/users/ en-us (c) Gossamer Threads Inc. All rights reserved. 25 Nov 2009 00:07:28 -0800 120 75 23 http://www.gossamer-threads.com/lists/ntop/users/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg I Googled and read the Wikis and I can't find the answer to this. Pardon my question. I installed ntop and used it for monitoring traffic on my wirele 24 Nov 2009 05:10:02 -0800 http://www.gossamer-threads.com/lists/ntop/users/24285 Say, I'm trying to monitor the traffic on eth0 and eth0:0, eth0:1 and eth0:2 . However no matter what I try I can only see eth0. Can this be done wit 23 Nov 2009 01:27:39 -0800 http://www.gossamer-threads.com/lists/ntop/users/24284 Gary, my comment was based on differences between the hostname displayed by ntop and what a reverse lookup generated. I found a post by Burton Stra 18 Nov 2009 07:04:09 -0800 http://www.gossamer-threads.com/lists/ntop/users/24278 Ubuntu Server 9.10, using stock kernel 2.6.31-14-generic-pae, and PF_RING 4.1 inserted as module, make and install PF_RING/userland. I'm not sure wha 16 Nov 2009 09:13:44 -0800 http://www.gossamer-threads.com/lists/ntop/users/24257 I am using ntop to monitor traffic on a software router (Ubuntu 8.10 server) that manages a 3G modem. wvdial periodically resets the modem because 16 Nov 2009 08:07:53 -0800 http://www.gossamer-threads.com/lists/ntop/users/24259 I currently use a 3G (cell-based) Internet service (no access to WiMax, cable or DSL), and excess usage charges can quickly build up. I am hoping t 16 Nov 2009 06:11:05 -0800 http://www.gossamer-threads.com/lists/ntop/users/24258 Does ntop use the HTTP headers to resolve hosts to hostnames? I sometimes see the same hostname associated with multiple hosts that resolve to diff 14 Nov 2009 13:50:22 -0800 http://www.gossamer-threads.com/lists/ntop/users/24254 hello, I am a Graduate research assistant at GLORIAD(Global Ring Network for Advanced Application Development), University of Tennessee, US. GLORIAD 12 Nov 2009 03:24:47 -0800 http://www.gossamer-threads.com/lists/ntop/users/24252 Hello, I'd appreciate any help possible in troubleshooting some poor ntop performance I'm seeing. I'm seeing a lot of dropped packets both in the 03 Nov 2009 14:13:01 -0800 http://www.gossamer-threads.com/lists/ntop/users/24234 Dear all I have just committed PF_RING 4.1 that's an optimized version of 4.x. This version finally support transparent_mode for increasing further 31 Oct 2009 11:35:18 -0800 http://www.gossamer-threads.com/lists/ntop/users/24219 Hello list, I¹m quite new to ntop, and I¹m asking if there is a way to have a ³customized² view to see a graph for the amount of data transferred on 31 Oct 2009 06:06:26 -0800 http://www.gossamer-threads.com/lists/ntop/users/24214 Hi, i am monitoring the traffic of our ASR 1002 router (via netflow) and i am trying to display different graphs for total outgoing and total incoming 28 Oct 2009 23:37:40 -0800 http://www.gossamer-threads.com/lists/ntop/users/24199 Hello, i tried to compile PF_RING but i have this error, the operating system is CENTOS 4.8 with vanilla kernel 2.6.27.37 [root@ntop kernel]# make ma 22 Oct 2009 03:16:51 -0800 http://www.gossamer-threads.com/lists/ntop/users/24168 Hello I have some problem about host clusters. When I click IP -> Summary -> Host Clusters, I can see my clusters, and some statistics data. But clic 19 Oct 2009 23:20:35 -0800 http://www.gossamer-threads.com/lists/ntop/users/24153 Hello, I have installed ntop 3.3.9 and i'm having difficulty loading most of the pages. I have to stop the browser, and go back and forth a few time 19 Oct 2009 09:58:23 -0800 http://www.gossamer-threads.com/lists/ntop/users/24150 Dear all this is to announce the release of PF_RING 4.0. Due to popular demand I have finally managed to build a new release of PF_RING that can be 18 Oct 2009 13:00:38 -0800 http://www.gossamer-threads.com/lists/ntop/users/24139 Hi! I've installed ntop from SVN and configured the sflow plugin. Now i get thousand of messages like this: SFABORT: 2 SFABORT: 1 unrecognized extend 15 Oct 2009 03:57:23 -0800 http://www.gossamer-threads.com/lists/ntop/users/24124 Hello. We have been running a copy of ntop 3.3.2 on a Windows 2003 Standard Server for nearly two years without any problems using binaries purchased 14 Oct 2009 15:44:28 -0800 http://www.gossamer-threads.com/lists/ntop/users/24120 Hi All. Thank you all for the fast reply. The micro bursts I'm dealing with are very interesting. for example. I have a leased line of 10Mb from poin 11 Oct 2009 19:45:47 -0800 http://www.gossamer-threads.com/lists/ntop/users/24109 Why everyone keeps double posting? (am I the only one seeing this?) -rsd _______________________________________________ Ntop mailing list Ntop@listg 11 Oct 2009 16:49:58 -0800 http://www.gossamer-threads.com/lists/ntop/users/24102 I am out of the office until 10/28/2009. - For Applications support (ICAP, Online reports, Data extraction...) please contact Phuc Tan Tran. - For In 11 Oct 2009 14:53:19 -0800 http://www.gossamer-threads.com/lists/ntop/users/24101 Hi All, Thank you all for the great product. I would like to know if it's possible to create a graph from a Network Flows created using the -F option? 11 Oct 2009 13:07:34 -0800 http://www.gossamer-threads.com/lists/ntop/users/24095 When I first start ntop, everything runs normally for at least 15 minutes or so. After that point, one of the only pages that I can access with my bro 08 Oct 2009 12:58:45 -0800 http://www.gossamer-threads.com/lists/ntop/users/24093 Dear all, I am having same problem as Chor Keung Li had. I got ntop from SVN, version 3.3.11-dev. Everything worked fine until I turned on sflow plugi 08 Oct 2009 09:33:28 -0800 http://www.gossamer-threads.com/lists/ntop/users/24089 All I'm a noobie to NTOP and have a stupid question that I hope someone can help me with. I have ntop installed on Fedora 11 using the fedora rpm ins 05 Oct 2009 14:18:03 -0800 http://www.gossamer-threads.com/lists/ntop/users/24059 I am out of the office until 10/05/2009. I have received the email message that you sent and will respond to it when I return. If you feel your mess 04 Oct 2009 01:00:58 -0800 http://www.gossamer-threads.com/lists/ntop/users/24054 Hi, Is there an easy way to show only internet in/out usage for hosts? That's my main need and Ntop is showing so much that I can't tease out the inf 03 Oct 2009 22:38:51 -0800 http://www.gossamer-threads.com/lists/ntop/users/24052 Hi, Has anyone used ntop to sniff a juniper netscreen SSG-140? I'm trying to figure out where jflow is configured but I can't find it anywhere. Thank 02 Oct 2009 09:23:17 -0800 http://www.gossamer-threads.com/lists/ntop/users/24051 When I select "Hosts World Map" from the ntop web interface, I'm presented with an error that my Google Maps API key has been rejected. I've visited 01 Oct 2009 13:46:43 -0800 http://www.gossamer-threads.com/lists/ntop/users/24049 I am trying to find a good web usage reporting solution for a client. NTOP seems the most promising so far and I am in the process of setting it up, b 30 Sep 2009 09:22:11 -0800 http://www.gossamer-threads.com/lists/ntop/users/24047 Is there a way to name IP's with hostnames in NTOP? It is not reading all the hostnames on our internal network. I tried setting up /etc/hosts but i 30 Sep 2009 06:06:21 -0800 http://www.gossamer-threads.com/lists/ntop/users/24044 hey all i am new to NTOP i installed ntop successfully i have a server with fedora core 7 OS but i am not been able to monitor the customers traffic 30 Sep 2009 00:06:24 -0800 http://www.gossamer-threads.com/lists/ntop/users/24041 Hi, I've compiled the ntop port on FreeBSD 7.1 and on a 7.2 machine. Both times I keep getting: [warn] kevent: Bad file descriptor when I start ntop 29 Sep 2009 05:59:37 -0800 http://www.gossamer-threads.com/lists/ntop/users/24040 Greetings all, I'd be grateful for any hints or nudges in the right direction! First, specifics: ntop 3.3.3, rrdtool 1.3.1, kernel 2. 22 Sep 2009 06:36:47 -0800 http://www.gossamer-threads.com/lists/ntop/users/24002 Hi, The stats reported by ntop are gathered (eg, IP | Summary | Traffic) for which period and how long? 1 hour? 1 day? any way to configure it? Than 21 Sep 2009 21:26:05 -0800 http://www.gossamer-threads.com/lists/ntop/users/23995 I've been getting this a lot lately. We are using the default of (32768). We do see a lot of hosts but is there a good resolution for this, or shoul 16 Sep 2009 11:24:13 -0800 http://www.gossamer-threads.com/lists/ntop/users/23975 ntop crashes on one of my computers very often, while it works without any problem on other computers.  I had a gdb session open when ntop seg faulte 13 Sep 2009 17:30:07 -0800 http://www.gossamer-threads.com/lists/ntop/users/23967 Hello, Have you guys seen this error with ntop. It's preventing me from generating any graphs. I've tried upgrading to the latest rrd release, but di 11 Sep 2009 16:47:09 -0800 http://www.gossamer-threads.com/lists/ntop/users/23965 Hi, I'm new to ntop and I'm having trouble with make and libGeoIP.so. Looks there's a path issue. Could someone please advise how to get around this? 11 Sep 2009 13:20:57 -0800 http://www.gossamer-threads.com/lists/ntop/users/23962 pas comprendre parler francais PERRIER CLAUDE MAINTENANCE ELECTRONIQUE CEA Valduc Tél : 03.80.23.40.00 poste:36532 Fax : 03.80.23.51.26 ntop-re 09 Sep 2009 03:37:45 -0800 http://www.gossamer-threads.com/lists/ntop/users/23952 Hi, I have Ntop 3.3.9 installed on Fedora 11 and have one NetFlow interface and my /var/lib/ntop directory is 8.5 meg in size and not growing much bu 04 Sep 2009 11:57:27 -0800 http://www.gossamer-threads.com/lists/ntop/users/23919 Hallo, I have been running Ntop 3.33.9 for about three months flawlessy on Ubuntu Jaunty (2.6.28-15-server). Since some days it keeps crashing after 04 Sep 2009 03:01:46 -0800 http://www.gossamer-threads.com/lists/ntop/users/23912 We have many devices that we want to configure Ntop to receive Netflow flows from (each on seperate ports), so we would like to automate the configura 02 Sep 2009 19:49:27 -0800 http://www.gossamer-threads.com/lists/ntop/users/23905 Hello, We have been experiencing packet loss when capturing packets from a 3G wireless modem using Fedora 10's tcpdump. In order to avoid dropped pa 01 Sep 2009 00:41:23 -0800 http://www.gossamer-threads.com/lists/ntop/users/23898 Hi All, I see my ntop web server stop responding every few days (I really only check it once in the morning unless there is a problem). The process 24 Aug 2009 14:18:47 -0800 http://www.gossamer-threads.com/lists/ntop/users/23881 I have small issue with Ntop 3.3.11-dev that I wonder if anyone else sees. Basically at some point the Libpcap Dropped Packet counter starts to go c 12 Aug 2009 06:48:59 -0800 http://www.gossamer-threads.com/lists/ntop/users/23864 Network Throughput: All Hosts - Data Sent+Received http://192.168.0.11:3000/sortDataThpt.html?showH=0 <http://192.168.0.11:3000/sortDataThpt.html?sho 12 Aug 2009 00:04:00 -0800 http://www.gossamer-threads.com/lists/ntop/users/23863 This may be a rather stupid question but when looked at the TCP/UDP Service/Port Usage under a specific host, if I see something like: IP Service 11 Aug 2009 18:49:34 -0800 http://www.gossamer-threads.com/lists/ntop/users/23862 Hi ! My ntop is configured fine and its working but i can see the following messages in log. Thu 06 Aug 2009 02:27:21 PM CEST errno 10 during sen 08 Aug 2009 08:34:02 -0800 http://www.gossamer-threads.com/lists/ntop/users/23837 Je serai absent(e) à partir du 08/08/2009 de retour le 31/08/2009. Je répondrai à votre message dès mon retour. Attention : Les informations figur 08 Aug 2009 01:01:16 -0800 http://www.gossamer-threads.com/lists/ntop/users/23833 Everyone, Is is possible to import a Wireshark packet capture (pcap) file into ntop? If this is possible, how is is done? Thanks Gordon 07 Aug 2009 17:51:57 -0800 http://www.gossamer-threads.com/lists/ntop/users/23815 Hi! I've installed ntop and run it from the command line, but the webserver, happily listening on port 3000, won't allow connections it just sends a 07 Aug 2009 17:49:40 -0800 http://www.gossamer-threads.com/lists/ntop/users/23814 Hi ! My ntop is configured fine and its working but i can see the following messages in log. Thu 06 Aug 2009 02:27:21 PM CEST errno 10 during se 06 Aug 2009 06:07:15 -0800 http://www.gossamer-threads.com/lists/ntop/users/23810 I am trying to uninstall / reinstall ntop. I am having issues with host.clusters and am hoping a reinstall may fix some things. My issue is that an 03 Aug 2009 13:31:13 -0800 http://www.gossamer-threads.com/lists/ntop/users/23792 Hello, I start ntop 3.3.10/11 from source . But I'am missing a startup script for Suse 11.1. Best regards/Mit freundlichen Grüßen Rolf Wiebel ____ 03 Aug 2009 04:12:41 -0800 http://www.gossamer-threads.com/lists/ntop/users/23790 Hi, When trying to read in a pcap dump, I am getting this error in my logs during startup: Jul 31 08:16:40 ntop ntop[1616]: THREADMGMT[t303367259 31 Jul 2009 05:29:02 -0800 http://www.gossamer-threads.com/lists/ntop/users/23781 Hi ntop! This is my first post, I hope this is on topic! I have a small problem with "make" with ntop on a Debian 5.0.2 with PF_RING. The solution mi 30 Jul 2009 17:11:19 -0800 http://www.gossamer-threads.com/lists/ntop/users/23770 Hi, I'm seeing an inbound traffic spike at our hosting facility early every morning at roughly the same time through our MRTG and Cacti graphs. We 30 Jul 2009 09:17:38 -0800 http://www.gossamer-threads.com/lists/ntop/users/23764 Hello, I Wonder if Ntop is able to decode VRF and sending Netflow packet including this VRF information to a Netflow collector ? Sincères salutatio 29 Jul 2009 07:20:50 -0800 http://www.gossamer-threads.com/lists/ntop/users/23756 I tweaked a bunch of settings in globals-defines.h and this now appears to work for me. Before I post something that could break things, contact me o 24 Jul 2009 12:36:54 -0800 http://www.gossamer-threads.com/lists/ntop/users/23739 I'm still having problems with Ntop dying. Generally I get this log entry. Jul 23 18:34:58 ntop ntop[12891]: *** glibc detected *** /usr/local/bin/n 24 Jul 2009 07:00:32 -0800 http://www.gossamer-threads.com/lists/ntop/users/23721 Anyone able to build PF_Ring with the newest Centos 5 kernel? It's possible I'm making a mistake but the rpm build dies on the rt73usb.c driver whic 23 Jul 2009 11:00:51 -0800 http://www.gossamer-threads.com/lists/ntop/users/23710 I have a $HITLOAD of settings in prefsCache.db from version 3.2.1. When I upgraded to 3.3.10 it won't read my prefsCache.db file. Should it read v3. 23 Jul 2009 08:56:59 -0800 http://www.gossamer-threads.com/lists/ntop/users/23705 Running 3.3.10 / 3.3.11 on RHEL 2.6.18-128.1.16.el5 #1 SMP I have -K and -t 5, no errors in log. Gdb captures the faults so I guess I can run 23 Jul 2009 08:35:32 -0800 http://www.gossamer-threads.com/lists/ntop/users/23704 Hello, I just installed a Debian lenny on a workstation for tests on several monitoring software. And since I lack some experience in installing sof 22 Jul 2009 01:25:27 -0800 http://www.gossamer-threads.com/lists/ntop/users/23697 en francais svp PERRIER CLAUDE MAINTENANCE ELECTRONIQUE CEA Valduc Tél : 03.80.23.40.00 poste:36532 Fax : 03.80.23.51.26 ntop-request@unipi.it 21 Jul 2009 23:37:05 -0800 http://www.gossamer-threads.com/lists/ntop/users/23696 I have two questions with regards to host clusters. I have created multiple host clusters with the ip address range like cluster.Network1=10.2.0.0/16 21 Jul 2009 12:16:15 -0800 http://www.gossamer-threads.com/lists/ntop/users/23691 I am using ntop, compiled on CentOs5.3. Though I have a domain brucedot.net (you won't hit anything from the outside.) I reach it at home via the loc 18 Jul 2009 09:23:09 -0800 http://www.gossamer-threads.com/lists/ntop/users/23671 I have tried searching a variety of different ways but with no results. How do I whitelist or add ip ports so they don't show as "suspicious IP ports 14 Jul 2009 09:17:55 -0800 http://www.gossamer-threads.com/lists/ntop/users/23647 kernel: [19274.812875] ntop[2455]: segfault at 4c0 ip b778fe91 sp b17da934 error 4 in libc-2.9.so[b7720000+15c000] linux ubuntu 2.6.28-13-generic cu 14 Jul 2009 04:21:21 -0800 http://www.gossamer-threads.com/lists/ntop/users/23646 Hi all, I have been trying to install ntop on my Mac for sometime. I am able to successfully complete the ./configure step in installation but I am 08 Jul 2009 18:38:20 -0800 http://www.gossamer-threads.com/lists/ntop/users/23633 I'm having problems with compiling from source on OpenBSD 4.5. The ./configure reports an error: Critical library/include tests... found in / 08 Jul 2009 08:31:41 -0800 http://www.gossamer-threads.com/lists/ntop/users/23628 Hi All, I've bought the latest version of ntop for win32 and installed it on a Windows Server 2003 VM that I have running in my test lab (aka Skyn 06 Jul 2009 00:22:33 -0800 http://www.gossamer-threads.com/lists/ntop/users/23617 Hello all, I'm new to ntop. I have a network of 50 computers. I'd like to find out, [1] Which machine is using the max. bandwith at (a) any given t 04 Jul 2009 22:00:19 -0800 http://www.gossamer-threads.com/lists/ntop/users/23614 I am out of the office until 07/04/2009. Please contact Phuc Tan Tran for Applications support and Cong Thanh Do for Infrastructure support. Thanks. 03 Jul 2009 03:06:42 -0800 http://www.gossamer-threads.com/lists/ntop/users/23611 Hi all, My ntop suddently crashed when receiving sflow data a while from a router switch (EX4200). The following errors were recoded before ntop 02 Jul 2009 18:12:27 -0800 http://www.gossamer-threads.com/lists/ntop/users/23609 On 2 July 17:44 2009 Wolfgang Moll spoke: | On Wed Jun 10 23:33:26 CEST 2009, Graeme Fowler graeme at graemef.net wrote | >> | >> On Wed, 2009-06-1 02 Jul 2009 08:53:48 -0800 http://www.gossamer-threads.com/lists/ntop/users/23607 On Wed Jun 10 23:33:26 CEST 2009, Graeme Fowler graeme at graemef.net wrote >> >> On Wed, 2009-06-10 at 16:45 -0400, inetjunkmail wrote: >> >> I'm get 02 Jul 2009 08:44:13 -0800 http://www.gossamer-threads.com/lists/ntop/users/23605 I am using an NTOP instances in-house to monitor a 96-port (gigabit ports) HP ProCurve using sFlow. There is an initiative to move our servers to the 01 Jul 2009 09:11:17 -0800 http://www.gossamer-threads.com/lists/ntop/users/23602 Has there been any progress on getting v9 NetFlow Templates from a Cisco ASA5505 properly recognized? If ntop can't do it, does anyone know of anythi 30 Jun 2009 16:02:53 -0800 http://www.gossamer-threads.com/lists/ntop/users/23598 When trying to stop/start netflow, rrd, etc. it segfaults. I can't change any of my rrd settings, as soon as I click save it faults and the save is n 25 Jun 2009 16:33:33 -0800 http://www.gossamer-threads.com/lists/ntop/users/23584 Juniper devices can apparently generate J-Flow and sFlow - are they equivalent as far as ntop is concerned? NOTICE: This email is intended only 25 Jun 2009 15:16:45 -0800 http://www.gossamer-threads.com/lists/ntop/users/23581 I have not looked in the source code to see if there is a hard limit, but I haven't found the answer in any FAQ. Is there a maximum limit to the numb 25 Jun 2009 15:16:31 -0800 http://www.gossamer-threads.com/lists/ntop/users/23580 STILL trying to track down high CPU load since the upgrade to 3.3.x. This morning one of my nTop instances that normally runs < 10% (even on 3.3.10) j 25 Jun 2009 13:54:37 -0800 http://www.gossamer-threads.com/lists/ntop/users/23576 Hi Gary, Thanks for your advice! I still got the same compliationr error even downloaded source from freshmeat  or from svn. It is strange that I go 25 Jun 2009 02:13:23 -0800 http://www.gossamer-threads.com/lists/ntop/users/23571 Hi, My autogen.sh is below, Thanks! ====================================== Starting ntop automatic configuration system v.0.2.3   Please be patient, 24 Jun 2009 03:22:29 -0800 http://www.gossamer-threads.com/lists/ntop/users/23560 Hi all, Anyone have idea on the error, I'm still struggling on it. Thanks! ________________________________ 寄件人﹕ Chor Keung Li <ckat512@ 24 Jun 2009 01:01:34 -0800 http://www.gossamer-threads.com/lists/ntop/users/23557 Hello, Im sorry to write here, but after many hours googling didnt find any answer. I have default ntop package on debian box running ok with RRD pl 23 Jun 2009 15:10:28 -0800 http://www.gossamer-threads.com/lists/ntop/users/23551 Hello, Anyone have a public accessible nTop box with netflow I could use to test with? I've been fighting this high CPU load issue for many many 23 Jun 2009 10:25:08 -0800 http://www.gossamer-threads.com/lists/ntop/users/23550 Dear list,   The problem is when I compiled the ntop 3.3.10, I got the following error while running the autogen.sh. I have spent over 1 week to fig 22 Jun 2009 20:33:36 -0800 http://www.gossamer-threads.com/lists/ntop/users/23539 Dear list, I want to enable MySQL support to let my netflow data storing into it. I have change the DB config to allow MySQL DB in Netflow plugin con 22 Jun 2009 20:30:17 -0800 http://www.gossamer-threads.com/lists/ntop/users/23538 Hi. We have a problem.If anyone should help ,we 'll be nice (: The problem is about ntop's dump.It is not enough for for our company. We want to lo 22 Jun 2009 05:55:14 -0800 http://www.gossamer-threads.com/lists/ntop/users/23532 Hi, I am getting the following error on running the "make" command. The "./ autogen.sh " was successful without any warnings ----------------------- 21 Jun 2009 14:12:04 -0800 http://www.gossamer-threads.com/lists/ntop/users/23529 The "install" script was failing for me so I HAD been running ntop out of the work / make directory. Seemed to work fine, other than this crazy threa 19 Jun 2009 14:45:29 -0800 http://www.gossamer-threads.com/lists/ntop/users/23528 After starting ntop (perhaps only the very first time?) it appears to be running correctly, yet all my reports are empty - no data to display yet and 19 Jun 2009 14:36:21 -0800 http://www.gossamer-threads.com/lists/ntop/users/23527 While troubleshooting my crashes during/after IDLE_PURGE processes, I found a host (CA eTrust) that scans our entire internal network range (all possi 19 Jun 2009 11:51:39 -0800 http://www.gossamer-threads.com/lists/ntop/users/23521 Is the host contact counters - the ones used for the Health flag - is it a running total since nTop was started? Or is it a rate of contacts, such as 18 Jun 2009 11:09:00 -0800 http://www.gossamer-threads.com/lists/ntop/users/23511 n t o p v e r s i o n '3.3' p r o b l e m r e p o r t From: Robert Grasso______________________________ EMail: robert.grasso@cedrat.com______ 18 Jun 2009 09:38:12 -0800 http://www.gossamer-threads.com/lists/ntop/users/23509 On 3.3.10 rev 3780 - Solaris 10 x86. Had this same problem on 3.2 on FreeBSD... Anyway, nTop blows up after an IDLE_PURGE cycle. There was no en 18 Jun 2009 09:19:01 -0800 http://www.gossamer-threads.com/lists/ntop/users/23507 When viewing Historical Data for an interface, changing the view to "Last 6 hours" actually displays the last 6 days! http://myntop:3000/plugins/r 17 Jun 2009 15:15:18 -0800 http://www.gossamer-threads.com/lists/ntop/users/23505