yanodd at otenet
Feb 8, 2012, 4:43 AM
Post #1 of 1
(190 views)
Permalink
|
|
newbie (netflow-related) nprobe/ntop problem
|
|
hi,
I'm trying to use nprobe/ntop as a netflow collector/analyser. I've
followed this simple howto:
http://www.ntop.org/nprobe/using-ntop-as-a-flow-collector-for-nprobe/
I'm using nprobe v.6.7.0 ($Revision: 2111 $) and my command line is:
./nprobe-6.7.0-static-linux-x64 -i bond0 -V 9 -n localhost:XXXX
I'm using ntop 3.3.8 (Dag Apt RPM Repository) and my command line is:
ntop -a /var/log/ntop -i none -w 3000
I'm collecting flows from a single cisco 6509 and I can confirm that
with a simple tcpdump on the server running ntop/nprobe. When I log
in to ntop's web interface I see that the only network interface used,
is the netflow virtual interface that I've configured.
So, I'm expecting all information to be related to the netflow collection
but thats not true. I'm actually seeing traffic analysis from hosts that
are connected to the ntop/nprobe server (for example, my workstation).
Am I missing something?
--
Yannis Nikolopoulos OTE S.A
e-mail: yanodd [at] otenet IP Network Planning
tel: +302106116293
----------------------------------------------------------------------------
() ASCII Ribbon Campaign - against HTML email & vCards
/\
_______________________________________________
Ntop-misc mailing list
Ntop-misc [at] listgateway
http://listgateway.unipi.it/mailman/listinfo/ntop-misc
|
