pkc_mls at yahoo
Jul 31, 2012, 11:48 PM
Post #1 of 1
srx branch - dhcp on vlan interface with multiple ipv4 addresses
I had an issue with an srx100 device.
I configured dhcp server for a range 192.168.31.0/24. (internal lan).
My internal interfaces are part of an ethernet-switching config.
The vlan.192 interface has 192.168.31.1/24 as IP.
When I add an IP to my vlan interface on a different subnet (let's say
the dhcp doesn't work anymore for the first range. (even if the
192.168.31.1 is marked as primary and prefererd);
log shows the following :
Jul 5 06:58:28 -- looking for pool with subnet 10.168.31.1, prefix
Jul 5 06:58:28 unable to find pool for address `10.168.31.1' on
This was tested on 10.4, 11.4 and 12.1.
Does anyone know if this is by design or if I am missing something in my
juniper-nsp mailing list juniper-nsp [at] puck