jared at puck
Jul 14, 2012, 5:49 AM
Post #2 of 2
Flash programmers are cheap these days.. I don't know about the SRX650, but is the chip socketed? Generally I've seen these with PLCC32 chips, some are SMT some are socketed so you can remove it and read/reprogram it in an external reader.
Re: How-to flash RE BIOS (U-Boot+loader) on bricked SRX650 SRE6
[In reply to]
On Jul 14, 2012, at 3:28 AM, Peter J. Cherny wrote:
> After a hang and power cycle during a "request system firmware upgrade re bios"
> I have a SRE6 RE with no leds and no u-boot prompt.
> Is this an RMA or does someone know the incantation required to re-flash the bios ?
> BTW, it's not a h/w issue, the RE worked before, it's a classic bricked bios.
> I suppose one failure in a dozen or so boxen is sort of ok, but not nice <g>
> juniper-nsp mailing list juniper-nsp [at] puck
juniper-nsp mailing list juniper-nsp [at] puck