misha.gzirishvili at gmail
Jan 27, 2012, 11:24 AM
Post #2 of 3
(699 views)
Permalink
|
Hi There,
Currently I'm trying to configure private vlans on EX 4200.
Requirement to configure private vlans accross switches is to have junos
10.4R1, seefollowing link:
http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/ex-series-software-features-overview.html#layer-2-protocols-features-by-platform-table
About adding vlans, when you are configuring private vlans on EX4200 , you
do not need vlan-id-s, community names are enough. but if you want to span
PVLAN across switches , you will need additional vlan-id to use, within
trunk port.
One more link about PVLANs:
http://www.juniper.net/techpubs/en_US/junos10.4/topics/concept/private-vlans-ex-series.html#jd0e54
HTH
Best Regards,
Misha
On Fri, Jan 27, 2012 at 9:37 AM, Shane Short <shane [at] short> wrote:
> Hi Guys,
> I'm currently trying to figure out how I can deploy either PLVAN or some
> kind of local ethernet isolation on my network.
> I currently have a bunch of customers on /30 interconnects which are
> trunked back to our EX4200 for aggregation. I'd like to somehow shift those
> customers into a larger (say, /25) range, while forcing all the traffic
> through the aggregation switch. I initially thought that PVLAN would do
> what I want, but it seems to baulk I try and add one of the tagged VLANs
> into the mix. Basic diagram is below (forgive my horrible ASCII art)
>
>
> | Cisco Switch | -- Tagged Vlans -> | EX4200 |
> | VPS Server | -- Tagged Vlans ---------^
>
>
> If anyone knows how I could achieve what I'm trying to do, be it with
> PVLAN or something else I've not come across, any assistance would be
> greatly appreciated. :)
>
> -Shane
> _______________________________________________
> juniper-nsp mailing list juniper-nsp [at] puck
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp [at] puck
https://puck.nether.net/mailman/listinfo/juniper-nsp
|
