tcsillag at interware
May 3, 2012, 5:41 AM
Views: 506
Permalink
|
On 05/03/2012 02:34 PM, Eric Helm wrote:
>
>
> On 5/2/2012 4:16 PM, Tamas Csillag wrote:
>> Dear All,
>>
>> After exploring the possibilities of my FWS24 (kinda old, I know), I
>> found these options:
>>
>> aggregated-vlan support for larger Ethernet frame up to 1530 bytes
>> tag-type Customize value used to indicate tagged VLAN port
>>
>> Does this mean that this baby supports Q-in-Q?
>>
>> Also, does anybody have an older FastIron config guide? Most stuff I can
>> dig up is for the FWS624 and other newer switches.
>>
>
> You can do it with the tag-type command. A caveat on the FastIron
> platform is that command applies to a port region, not just a single
> port. Port regions on those are 1-12 and 13-24 I believe.
>
> /Eric
That's what I gathered from the Fastiron config guides too, but the
command does not take an interface as an argument, just the integer, like:
tag-type <number> <cr>
So I assume it's for the whole system, then?
Tamas
_______________________________________________
foundry-nsp mailing list
foundry-nsp [at] puck
http://puck.nether.net/mailman/listinfo/foundry-nsp
|
