robhass at gmail
Oct 10, 2011, 12:53 AM
Post #1 of 1
(369 views)
Permalink
|
|
Problem with adding new 1G link to static LAG
|
|
Hi
I have problem with adding new 1Gb link to existing 3x1Gb LAG (trunk).
Switch don't want to
accept below command:
BR-telnet [at] sw0(config)#trunk ethe 0/1/21 to 0/1/24
Error - Trunk/Port does not match: Port 0/1/21 -> Trunk Id 21 But Port
0/1/24 -> Trunk Id 2049
Is any solution to my problem ?
My configuration:
Ports 0/1/21 to 0/1/23 - ports currently active in LAG
Port 0/1/24 - new port which I would like to add to above LAG
Config file:
trunk ethe 0/1/21 to 0/1/24
!
interface ethernet 0/1/21
port-name r01
load-interval 30
spanning-tree 802-1w admin-pt2pt-mac
no flow-control
pvst-mode
!
Output of 'show trunk' command:
>Configured trunks:
[...]
Trunk ID: 21
Hw Trunk ID: 2
Ports_Configured: 3
Primary Port Monitored: Jointly
Ports 0/1/21 0/1/22 0/1/23
Port Names none none none
Port_Status enable enable enable
Monitor off off off
Rx Mirr Port N/A N/A N/A
Tx Mirr Port N/A N/A N/A
Monitor Dir N/A N/A N/A
>Operational trunks:
[...]
Trunk ID: 21
Hw Trunk ID: 2
Duplex: Full
Speed: 1G
Tag: Yes
Priority: level0
Active Ports: 3
Ports 0/1/21 0/1/22 0/1/23
Link_Status active active active
port_state Forward Forward Forward
Software/hardware:
Copyright (c) 1996-2010 Brocade Communications Systems, Inc.
UNIT 1: compiled on Feb 16 2011 at 05:19:32 labeled as FGSL07202a
(3165658 bytes) from Primary FGSL07202a.bin
SW: Version 07.2.02aT7e1
Boot-Monitor Image size = 416213, Version:05.0.00T7e5 (Fev2)
HW: Stackable FLS624
--
Thanks,
Robert
_______________________________________________
foundry-nsp mailing list
foundry-nsp [at] puck
http://puck.nether.net/mailman/listinfo/foundry-nsp
|
