bmannella at gmail
Mar 28, 2011, 2:12 PM
Views: 583
Permalink
|
Just to update the list,
I applied the following
ip as-path access-list ComcastAS seq 5 permit _7922_
route-map Level3ToComcast permit 11
match as-path ComcastAS
set local-preference 110
neighbor (Level3 Peer IP) route-map in Level3ToComcast
That seemed to shift all traffic to GBLX except for comcast traffic,
which it sent to Level3. Not really the effect i am looking for.
I assume something is wrong with the as-path access list? Any ideas?
On Thu, Mar 24, 2011 at 8:39 PM, Brendan Mannella <bmannella [at] gmail> wrote:
> All,
>
> So i run EBGP with Level 3 and GBLX with two MLXe's, one transit on
> each, the two routers run IBGP. Lately we have been having all kinds
> of issues with GBLX --> Comcast. Currently my outbound path to comcast
> goes through GBLX. I would like to change that to Level3. Will the
> below work and is this the best way?
>
>
> ip as-path access-list ComcastAS seq 5 permit _7922_
>
> route-map ComcastToLevel3 permit 11
> match as-path ComcastAS
> set local-preference 110
>
>
> I would then apply this to the GBLX session, correct?
>
> Thanks in advance.
>
_______________________________________________
foundry-nsp mailing list
foundry-nsp [at] puck
http://puck.nether.net/mailman/listinfo/foundry-nsp
|
