jumonville.nick at gmail
Nov 18, 2010, 12:24 PM
Post #1 of 1
(352 views)
Permalink
|
|
Re: foundry-nsp Digest, Vol 94, Issue 10
|
|
It is most likely a software problem, try to upgrade the card, then reboot
it. It might need the correct mbridge, I have seen this happen before.
-Nick Jumonville
On Thu, Nov 18, 2010 at 9:00 AM, <foundry-nsp-request [at] puck>wrote:
> Send foundry-nsp mailing list submissions to
> foundry-nsp [at] puck
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://puck.nether.net/mailman/listinfo/foundry-nsp
> or, via email, send a message with subject or body 'help' to
> foundry-nsp-request [at] puck
>
> You can reach the person managing the list at
> foundry-nsp-owner [at] puck
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of foundry-nsp digest..."
>
>
> Today's Topics:
>
> 1. Re: New MG8 switch blade BIMG8-10Gx4-v6-A
> CARD_STATE_INTERACTIVE (Remco Bressers)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 18 Nov 2010 16:44:08 +0100
> From: Remco Bressers <remco [at] signet>
> To: foundry-nsp [at] puck
> Subject: Re: [f-nsp] New MG8 switch blade BIMG8-10Gx4-v6-A
> CARD_STATE_INTERACTIVE
> Message-ID: <4CE549C8.7060601 [at] signet>
> Content-Type: text/plain; charset=ISO-8859-1
>
> What happens if you login to the card itself (# rconsole 2) and reboot
> the thing? You should see the boot log and reason why the card won't
> work. Are the software versions OK?
>
>
> --
> Regards,
> Signet bv
>
>
> Remco Bressers
>
> T 040 - 707 4 907
> F 040 - 707 4 909
> E rbressers [at] signet
>
>
>
> On 11/18/2010 03:49 PM, Dominic Douglas wrote:
> > Hi Justin,
> >
> > I saw your problem with the XMR 10G blade, but the problem is harder
> > then I expected.
> >
> > Lets go:
> >
> > 1. Removed blade from slot 2.
> > 2. Sh mod:
> > S2: Configured as BIMG8-10Gx4-v6 4-port 10GbE IPv4/v6 Module
> >
> > Log:
> > Nov 18 14:20:17:N:Module was removed from slot 2
> >
> > But the slot is already configured with the right module. I will remove
> > the config and reconfigure it:
> >
> > 3. (config)#no mod 2 bimg8-v6-10g-4-port
> > 4. (config)#module 2 bimg8-v6-10g-4-port
> > 5. Sh mod:
> > S2: Configured as BIMG8-10Gx4-v6 4-port 10GbE IPv4/v6 Module
> >
> > 6. Insert module:
> >
> > S2: Invalid Module CARD_STATE_DOWN (7) (previous state =
> > CARD_STATE_SW_LOADED)
> >
> > End after the module startup:
> >
> > S2: BIMG8-10Gx4-v6-A 4-port 10GbE IPv4/v6 Module (OACL)
> > CARD_STATE_INTERACTIVE 0
> >
> > It might be a bigger problem. This (new) module is an A module:
> >
> > BIMG8-10Gx4-v6-A
> >
> > Our other modules:
> >
> > M1 (upper): BIMG8-MR Management Module Active
> > M2 (lower):
> > F1: BIMG8-SFM Switch Fabric Module Active
> > S1:
> > S2: BIMG8-10Gx4-v6-A 4-port 10GbE IPv4/v6 Module (OACL)
> > CARD_STATE_INTERACTIVE 0
> > S3:
> > S4:
> > S5:
> > S6:
> > S7: BIMG8-1Gx40-SFP-v6 40-port 1 GbE IPv4/v6 Module (IPv6+OACL)
> > CARD_STATE_UP 40
> >
> >
> > Extra logging:
> >
> > Nov 18 14:26:07:N:Module 2 is reset by mgmt (reason: boot to interactive
> > mode)
> > Nov 18 14:25:38:N:Module was inserted to slot 2
> > Nov 18 14:20:17:N:Module was removed from slot 2
> > Nov 18 13:36:35:N:Module 2 is reset by mgmt (reason: boot to interactive
> > mode)
> > Nov 18 13:36:10:N:Module 2 is reset by mgmt (reason: CLI command)
> > Nov 18 13:24:17:N:Module 2 is reset by mgmt (reason: boot to interactive
> > mode)
> > Nov 18 13:23:48:N:Module 2 is reset by mgmt (reason: lp sync during
> booting)
> > Nov 18 13:22:19:N:Module was inserted to slot 2
> >
> >
> > The module is forced to interactive mode by the management. It might be
> > a software problem..
> >
> > Kind regards,
> >
> > Dominic
> >
> >
> >
> >
> >
> >
> >
> > On Thu, Nov 18, 2010 at 3:17 PM, Justin Suyk - Signet BV
> > <jsuyk [at] signet <mailto:jsuyk [at] signet>> wrote:
> >
> > Hi,
> >
> > We had to remove the blade before changing the config.
> > So :
> >
> > 1. remove module
> > 2. remove the blade config (no module ... bi-...)
> > 3. config the blade
> > 4. insert the blade
> > 5. get a beer
> >
> >
> > Regards,
> > Signet bv
> >
> >
> > Justin Suyk
> >
> > T 040 - 707 4 907
> > F 040 - 707 4 909
> > Kvk 17089930
> >
> >
> >
> > On 11/18/2010 03:11 PM, Dominic Douglas wrote:
> >>
> >> *Hi All,
> >>
> >> We do have a problem with one of our MG8 switches. We've added a
> >> new BIMG8-10Gx4-v6-A blade, but after configuration the blade will
> >> not recover from CARD_STATE_INTERACTIVE.
> >>
> >> S2: BIMG8-10Gx4-v6-A 4-port 10GbE IPv4/v6 Module (OACL)
> >> CARD_STATE_INTERACTIVE 0 000c.db27.4560
> >>
> >> Steps taken:
> >>
> >> 1. Reset module.
> >> 2. Set type to the slot port.
> >> 3. Turn on/off module.
> >>
> >> Unfortunately we can't find any logs about the new blade, only the
> >> current state: **CARD_STATE_INTERACTIVE.
> >>
> >> Kind regards,
> >>
> >> Dominic
> >> **
> >>
> >> *
> >>
> >>
> >> _______________________________________________
> >> foundry-nsp mailing list
> >> foundry-nsp [at] puck <mailto:foundry-nsp [at] puck>
> >> http://puck.nether.net/mailman/listinfo/foundry-nsp
> >
> >
> >
> >
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp [at] puck
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>
> ------------------------------
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp [at] puck
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
> End of foundry-nsp Digest, Vol 94, Issue 10
> *******************************************
>
|
