clement at cavadore
Dec 8, 2009, 7:12 AM
Post #3 of 3
(833 views)
Permalink
|
Hi,
B2P08001t works fine with IPv6.
Regards,
Clément
On Tue, 2009-12-08 at 11:55 +0100, Gunther Stammwitz wrote:
> Hello Clement,
>
> which exact software tree are you referring to?
>
> I was trying to enable v6 on 8001u (08.0.01uT53 / B2R08001u.bin) but didn't
> have success.
> Is the B2R-image the correct version set? My modules are jetcore (J-BxGMR4).
>
>
> Can't find the appropriate manual :-(
> The v6 manual from April (IPv6_April2009_Config_Guide.pdf) just says
> IronWare
> Software 07.7.02 and higher.
>
>
> Thanks,
> Gunther
>
> [.apologies for dupes - had to send the message again due to spam protection]
>
> > -----Ursprüngliche Nachricht-----
> > Von: foundry-nsp-bounces [at] puck [mailto:foundry-nsp-
> > bounces [at] puck] Im Auftrag von Clement Cavadore
> > Gesendet: Donnerstag, 8. Oktober 2009 00:55
> > An: Joseph Hardeman
> > Cc: foundry-nsp [at] puck
> > Betreff: Re: [f-nsp] IPv6 on BigIron?
> >
> > Hi,
> >
> >
> > Le mercredi 07 octobre 2009 à 18:19 -0400, Joseph Hardeman a écrit :
> > > Yes, the J-BxGMR4 will do IPv6, but you need to have a software
> > > version greater than 08.0.x.
> >
> >
> > More precisely: You need Jetcore module *and* software equals to 08.x.
> > 9.x or 7.x do not have any IPv6 features.
> >
> > However, Jetcore manager runs a fully software-based IPv6 routing.
> >
> > Regards,
> >
> > Clément
> >
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp [at] puck
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp [at] puck
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
foundry-nsp [at] puck
http://puck.nether.net/mailman/listinfo/foundry-nsp
|
