Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/nsp/force10/ en-us (c) Gossamer Threads Inc. All rights reserved. 10 Feb 2012 07:03:08 -0800 120 75 23 http://www.gossamer-threads.com/lists/nsp/force10/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg We're trying to deploy 10ge upstream to our S50n stack (read, all the port 0 modules are stacking modules). We're seeing a decent amount of Input CRC 28 Apr 2011 08:12:26 -0800 http://www.gossamer-threads.com/lists/nsp/force10/29179 I'm trying to put together a matrix of supported IPv6 features for various network and security hardware and one of the vendors that I no longer have 11 Apr 2011 11:10:43 -0800 http://www.gossamer-threads.com/lists/nsp/force10/28798 Anyone deploying S60's in significant quantity yet? Would love to know if you are experiencing mysterious reboots, too, because we sure are! -M _____ 08 Apr 2011 16:44:30 -0800 http://www.gossamer-threads.com/lists/nsp/force10/28786 Hey gang -- I'm wondering if anyone on the list has implemented a control plane rate-limiting solution for ICMP similar to the Cisco one outlined in 23 Feb 2011 18:19:35 -0800 http://www.gossamer-threads.com/lists/nsp/force10/27748 Hi All, I do have a case open with Force10 support on this, but it's been a long standing issue and I've gone so far as to re-architect our rather 22 Feb 2011 18:30:26 -0800 http://www.gossamer-threads.com/lists/nsp/force10/27714 Hi All, What's going on with my switch ? Jan 26 11:42:24.538 UTC: %STKUNIT0-M:CP %KERN-2-INT: soc_l2x_thread: DMA failed: Operation failed Jan 26 11 26 Jan 2011 03:47:38 -0800 http://www.gossamer-threads.com/lists/nsp/force10/27167 Hi, I'm doing centralized IP management. All client VLANs is configured as tagged VLANs to some L2 switches using 802.1Q. All clients are connected t 09 Jan 2011 09:30:55 -0800 http://www.gossamer-threads.com/lists/nsp/force10/26789 Hi all, I got the problem about power DC Force10 (FTOS 8.3.1.1): -- Power Supplies -- Unit Bay Status Type ------------------------------ 30 Nov 2010 00:36:47 -0800 http://www.gossamer-threads.com/lists/nsp/force10/26327 Dear All, I have planning to swap existing extreme to force10. Existing topology is we have twin Redundancy extreme switches. My question is if we s 25 Oct 2010 05:33:47 -0800 http://www.gossamer-threads.com/lists/nsp/force10/25746 Is there an option to assign a port along with the syslog server when issuing the "logging <ip>" config? I tried "logging <ip>:<port>" but it's not a 23 Jul 2010 11:32:56 -0800 http://www.gossamer-threads.com/lists/nsp/force10/24359