Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/nsp/force10/ en-us (c) Gossamer Threads Inc. All rights reserved. 12 Feb 2012 08:24:18 -0800 120 75 23 http://www.gossamer-threads.com/lists/nsp/force10/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg We're trying to deploy 10ge upstream to our S50n stack (read, all the port 0 modules are stacking modules). We're seeing a decent amount of Input CRC 28 Apr 2011 08:12:26 -0800 http://www.gossamer-threads.com/lists/nsp/force10/29179 I'm trying to put together a matrix of supported IPv6 features for various network and security hardware and one of the vendors that I no longer have 11 Apr 2011 11:10:43 -0800 http://www.gossamer-threads.com/lists/nsp/force10/28798 Anyone deploying S60's in significant quantity yet? Would love to know if you are experiencing mysterious reboots, too, because we sure are! -M _____ 08 Apr 2011 16:44:30 -0800 http://www.gossamer-threads.com/lists/nsp/force10/28786 Hey gang -- I'm wondering if anyone on the list has implemented a control plane rate-limiting solution for ICMP similar to the Cisco one outlined in 23 Feb 2011 18:19:35 -0800 http://www.gossamer-threads.com/lists/nsp/force10/27748 Hi All, I do have a case open with Force10 support on this, but it's been a long standing issue and I've gone so far as to re-architect our rather 22 Feb 2011 18:30:26 -0800 http://www.gossamer-threads.com/lists/nsp/force10/27714 Hi All, What's going on with my switch ? Jan 26 11:42:24.538 UTC: %STKUNIT0-M:CP %KERN-2-INT: soc_l2x_thread: DMA failed: Operation failed Jan 26 11 26 Jan 2011 03:47:38 -0800 http://www.gossamer-threads.com/lists/nsp/force10/27167 Hi, I'm doing centralized IP management. All client VLANs is configured as tagged VLANs to some L2 switches using 802.1Q. All clients are connected t 09 Jan 2011 09:30:55 -0800 http://www.gossamer-threads.com/lists/nsp/force10/26789 Hi all, I got the problem about power DC Force10 (FTOS 8.3.1.1): -- Power Supplies -- Unit Bay Status Type ------------------------------ 30 Nov 2010 00:36:47 -0800 http://www.gossamer-threads.com/lists/nsp/force10/26327 Dear All, I have planning to swap existing extreme to force10. Existing topology is we have twin Redundancy extreme switches. My question is if we s 25 Oct 2010 05:33:47 -0800 http://www.gossamer-threads.com/lists/nsp/force10/25746 Is there an option to assign a port along with the syslog server when issuing the "logging <ip>" config? I tried "logging <ip>:<port>" but it's not a 23 Jul 2010 11:32:56 -0800 http://www.gossamer-threads.com/lists/nsp/force10/24359 Has anyone else seen this behaviour: A pair of S50N's running VRRP to a host. When I try to write the config to the switch, it drops about 4 s 09 Jul 2010 09:32:09 -0800 http://www.gossamer-threads.com/lists/nsp/force10/24178 Hi, I'm looking forward to use the E300 as a BGP peering platform and I'm wondering if someone already did that and maybe has some experiences to sha 09 Jun 2010 04:15:04 -0800 http://www.gossamer-threads.com/lists/nsp/force10/23768 Hi there, I have a couple of S50N but it seems to not like SFTOS upgrade to 2.5.2 (I am currently on 2.2.x)... What is the best way to do that ? I h 04 Jun 2010 02:16:37 -0800 http://www.gossamer-threads.com/lists/nsp/force10/23687 I'm using an s50n running FTOS 7.8.1.3 and noticed that I don't have any counter information for my VLAN interfaces, for example: #show int vlan 14 V 30 Apr 2010 11:58:47 -0800 http://www.gossamer-threads.com/lists/nsp/force10/22941 We've been demoing some S50n units and have been having some problems which I have a hard time seeing are "normal", but wanted to get some outside per 26 Feb 2010 10:26:35 -0800 http://www.gossamer-threads.com/lists/nsp/force10/21790 We've recently picked up three used force10 SA-01-GE-48T switches. We're experiencing random issues where is seems like a significant portion of the 11 Feb 2010 18:18:58 -0800 http://www.gossamer-threads.com/lists/nsp/force10/21523 I'm considering getting a pair of S50n's for use in a colo setting. I'm liking the S50n's versus C6500 or C150 due to the following: * we're not curr 12 Jan 2010 15:03:12 -0800 http://www.gossamer-threads.com/lists/nsp/force10/20938 What's the FTOS equivalent to Cisco's: Switchport trunk encapsulation dot1q Switchport mode trunk ? I'm seeing "vlan-stack trunk", but that seems to 06 Nov 2009 08:52:36 -0800 http://www.gossamer-threads.com/lists/nsp/force10/20141 Thinking of using the S50V as an edge switch, taking advantage of its BGP and OSPF capabilities. Does anyone know how many routes it can handle before 24 Oct 2009 11:03:27 -0800 http://www.gossamer-threads.com/lists/nsp/force10/19934 Hi list, I am looking for a L2/L3 capable ethernet router with 20Gig ports in my core, that should do full bgp feeds from multiple upstreams w/ , IPv 30 Aug 2008 01:20:56 -0800 http://www.gossamer-threads.com/lists/nsp/force10/15337 Hi. I'm trying to spec a Force10 box to replace a Cisco 7603 with SUP720-3BXL, with the following goals in mind: - The smaller the box, the better (r 26 Aug 2008 16:28:35 -0800 http://www.gossamer-threads.com/lists/nsp/force10/15294 A new f10rancid module that supports all Force10 devices running FTOS is now available. John Heasley did most of the work, and I added some tweaks fo 26 Jun 2008 16:14:31 -0800 http://www.gossamer-threads.com/lists/nsp/force10/14676 Hi everyone, This list seems very calm lately, but it's the first place I've found for Force10 technical discussions, so here I go... I just bought 19 Jun 2008 06:09:40 -0800 http://www.gossamer-threads.com/lists/nsp/force10/14550 I am looking to consolidate my 2 juniper m7i's and Foundry BigIron 4000's into a E300 and was hoping to hear what users thought of thei r equipment, i 15 Jan 2008 12:53:36 -0800 http://www.gossamer-threads.com/lists/nsp/force10/2070 So does anyone know why FTOS 7.5.1.0 was taken off Force 10s support download site? Keith O'Neill Pando Networks 07 Sep 2007 03:00:58 -0800 http://www.gossamer-threads.com/lists/nsp/force10/2069