support at metrooptic
Jun 20, 2012, 6:50 AM
Post #1 of 1
(567 views)
Permalink
|
|
Summit 400-48t upgrade from EW 7.2 to EW 7.8.4
|
|
Hi,
We're attempting to upgrade a 400-48t from 7.2 to 7.8.4
And the release notes state to install *v73e0b43.Cxt*r first.
But the lowest EW image available is 7.4, and its been 1 week since
"they're looking for it" at EN.
Any idea for a solution? ( Offlist please )
Its not like you can just google it and find it in a torrent file =D
------
Upgrade a Summit 400 to ExtremeWare 7.8 as follows:
1 Upload the current configuration to a TFTP server.
2 If the current software version is ExtremeWare 7.3 or ExtremeWare 7.4
and BootROM version is 5.1,
download v783b5.Cxtr to the primary image space using download image
primary command then
go to step 6.
3 Download BootROM S400_boot51.bin for Summit 400-48t or S405_boot51.bin
for Summit 400-24 and
reboot the switch using the reboot command.
4 If the current software version is earlier than ExtremeWare 7.3, first
download *v73e0b43.Cxt*r to the
primary image space using the download image primary command and reboot
the switch using
the reboot command.
5 Download ExtremeWare 7.8 image v783b5.Cxtr to the primary image space
using the download
image primary command.
6 Download the configuration you saved in step 1.
--
-----
Alain Hebert MetroOptic, Inc. support [at] metrooptic
1080 Beaver Hall, Suite 1620, Montreal, Quebec H2Z 1S5
Tel: 514-990-5775 http://www.metrooptic.com Support: 514-573-6111
|
