joey at q7
Apr 25, 2011, 5:13 PM
Post #1 of 1
(581 views)
Permalink
|
|
simple rate-limiting on black diamond 6800
|
|
i have found info in the docs that indicate that to do inbound rate
limiting you have to burn an extra port and do vlan magic. but
elsewhere i see references to ingress qos profiles. some of the
commands aren't recognized, so it is all a bit confusing.
is the only way to do inbound rate limiting based on: configure vlan add
ports loopback-vid
or is there a way using regular qosprofile stuff? with previous
switches, i've just used autonegotiation, but limited to 10mb as a cheap
way to do some bandwidth throttling, but the black diamond doesn't seem
to have a way to do that either.
i realize these are fairly ancient switches, but i was surprised i
couldn't find simple ways to do things i did with even older procurve
switches :-).
_______________________________________________
extreme-nsp mailing list
extreme-nsp [at] puck
https://puck.nether.net/mailman/listinfo/extreme-nsp
|
