marcin at leon
Apr 21, 2011, 2:25 AM
Post #1 of 1
(472 views)
Permalink
|
|
Re: [rbak-nsp] Replacement XCRP3 Compact Flash Cards
|
|
Antonie falco wrote:
> Hello Marcin,
>
> I am of the understanding that the XCRP3 has specific requirements for
> slot0 and 1.
>
> From memory it was 256MB for Slot0 and 4GB for Slot1.
It is recommendation. As I know, slot 0 will work with 512M (however
this had never been a problem. Slot 1 works with 1G-4G (didn't test
greater capacities) however, my recommendation is SanDisk Extreme III.
I have tried some kingstone, it worked but was extremally slow.
I suppose that system driver has some constrains and if they are not
met, it switches to some default (very, very slow) mode.
Regards,
Marcin
>
> Regards,
> Antonie
>
> On Thu, Apr 21, 2011 at 4:30 PM, Marcin Kuczera <marcin [at] leon
> <mailto:marcin [at] leon>> wrote:
>
> Antonie falco wrote:
>
> Hello All,
>
> Can anyone advise as to where I can get OEM Redback/Ericsson
> XRCP3 compact flash cards ( Preferably New ) ?
>
> I believe that the XCRP3 came with a Scandisk Extreme III 256MB
> card and a Scandisk Extreme III 512MB or 1GB card.
>
>
> I have found standard 512MB Scandisk CF cards however I was
> informed that these do not perform to the same specifications
> the Extreme III cards do.
>
>
> Lastly, can anyone confirm the maximum compact flash sizes that
> can be used for each of the two internal CF slots.
>
>
> In SE100 I have tried 4G Extreme III from SanDisk - works fine.
> (BSD card replacement).
>
> We have this setup in 2x SE100 (both cards failed).
> So - no worry, use smallest Extreme III card you can find.
>
> Regards,
> Marcin
>
>
_______________________________________________
extreme-nsp mailing list
extreme-nsp [at] puck
https://puck.nether.net/mailman/listinfo/extreme-nsp
|
