
marcin at leon
Feb 23, 2010, 8:01 AM
Post #1 of 4
(1857 views)
Permalink
|
|
stpd issue between EW and XOS
|
|
hello, today I had a loop between devices, when switching one link from Alpine do SummitX650. All vlans are in stpd s0 domain, ports are stpd enabled but there was a loop that I have no idea what was the reason.. The only difference is in "auto-bind" i.e.: Alpine3808-GZE:1 # show vlan koalicja VLAN Interface[32-21f] with name "koalicja" created by user Tagging: 802.1Q Tag 401 Priority: 802.1P Priority 7 STPD: s0(Enabled,Auto-bind) Protocol: Match all unfiltered protocols. Loopback: Disable RateShape: Disable QosProfile:QP1 QosIngress:None Ports: 14. (Number of active ports=10) Slot-1 SummitStack-GZE.3 # show vlan "koalicja" VLAN Interface with name koalicja created by user Admin State: Enabled Tagging: 802.1Q Tag 401 Virtual router: VR-Default IPv6: None STPD: s0(Enabled) Protocol: Match all unfiltered protocols Loopback: Disabled NetLogin: Disabled QosProfile: None configured Egress Rate Limit Designated Port: None configured Flood Rate Limit QosProfile: None configured Ports: 28. (Number of active ports=16) on x650 there is no auto-bind - what will that cause ? How can I make all vlans in stpd s0 auto-bind mode ? vlan default on x650 is in auto-bind mode... Regard, Marcin _______________________________________________ extreme-nsp mailing list extreme-nsp [at] puck https://puck.nether.net/mailman/listinfo/extreme-nsp
|