fabian.extr at gmail
Jan 21, 2010, 7:47 AM
Post #2 of 2
(1150 views)
Permalink
|
Hi Marcin,
Check the LegacyCLI Guide on extremenetworks.com but the command is :
configure cli style legacy
Fabian.
-----Original Message-----
From: extreme-nsp-bounces [at] puck
[mailto:extreme-nsp-bounces [at] puck] On Behalf Of Marcin Kuczera
Sent: dimanche 10 janvier 2010 15:14
To: extreme-nsp [at] puck
Subject: [e-nsp] legacyCLI on x450
hello,
I'am trying to test LegacyCLI module for x450.
However, it seems not to be seen by the system.
Current State: OPERATIONAL
Image Selected: primary
Image Booted: primary
Primary ver: 12.3.3.6
Secondary ver: 12.3.3.6
SummitX450-24x.6 # show ver images
Card Partition Installation Date Version Name Branch
----------------------------------------------------------------------------
--
Switch primary Wed Jan 6 17:06:07 UTC 2010 12.3.3.6
summitX-12.3.3.6.xos v1233b6
Switch primary Wed Jan 6 17:36:29 UTC 2010 12.3.3.6
summitX-12.3.3.6-ssh.xmod v1233b6
Switch primary Wed Jan 6 20:50:47 UTC 2010 12.3.3.6
summitX-12.3.3.6-LegacyCLI.xmod v1233b6
Switch secondary Wed Jan 6 17:14:41 UTC 2010 12.3.3.6
summitX-12.3.3.6.xos v1233b6
Switch secondary Wed Jan 6 17:17:17 UTC 2010 12.3.3.6
summitX-12.3.3.6-ssh.xmod v1233b6
Switch secondary Wed Jan 6 17:35:30 UTC 2010 12.3.3.6
summitX-12.3.3.6-LegacyCLI.xmod v1233b6
SummitX450-24x.7 # enable cli ?
scripting CLI scripting
space-completion Space auto completion
SummitX450-24x.7 # enable cli
there is no command related to legacyCLI..
Is there anything wrong here ? or any specific algorythm to make it
running ?
Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp [at] puck
https://puck.nether.net/mailman/listinfo/extreme-nsp
_______________________________________________
extreme-nsp mailing list
extreme-nsp [at] puck
https://puck.nether.net/mailman/listinfo/extreme-nsp
|
