Mailing List Archive by Gossamer Threads http://www.gossamer-threads.com/lists/nsp/extreme/ en-us (c) Gossamer Threads Inc. All rights reserved. 12 Feb 2012 11:47:20 -0800 120 75 23 http://www.gossamer-threads.com/lists/nsp/extreme/ http://www.gossamer-threads.com/images/lists/rss_logo.jpg Hello, have a strange problem.. i thougth, Multicast isnt really a problem in the same vlan. Ist by default activated? I have a touchpanel (KNX Touc 26 Jan 2012 00:23:37 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/33172 hello, Recently I have a strange issue. There are 2 x450-24x switches connected with 2x1G over DWDM (passing through link states). Now, both links 25 Jan 2012 14:16:02 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/33169 Hello All, I have a problem with getting temperature via SNMP from X350-48t: the returned value stills the same until the console command 'show tempe 19 Jan 2012 23:37:29 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/33084 ������ ������ wrote: > Marcin, > Can you get what these peers are really receiving from your router? on the other sides it looks good: #show ip bgp 17 Jan 2012 10:41:42 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/33026 hello, has anyone experience with getting this information via SNMP: Slot-1 SummitStack-GZE.4 # show ports 2:7,1:17 transceiver information Port 16 Jan 2012 15:51:38 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/33000 Hello, Could somebody confirm relaying on hands-on experience that 3rd party SFPs (i.e. 1000Base-LX/LH) can be used in onboard SFP+ sockets at x650? 10 Jan 2012 07:10:54 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32919 hello, we have a stack of 2x X650, connected with 2x10G stack cable (basic one). Stack capacity in this configuration is only 10G (second is backup). 27 Dec 2011 03:05:46 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32737 Hello, is there a way to reset/recover admin password (without losing running configuration) on a) Summit series 200/250/400 probably running Extrem 15 Dec 2011 04:36:24 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32605 Hello, I have been trying to find this product for some of our old extreme rps units. I can't seem to find the dc cable for them so naturally I looke 18 Nov 2011 11:19:18 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32372 Hello, I was wondering if anyone knew of a vendor (or had experience with) they would recommend who could repair extreme switches or replace parts li 15 Nov 2011 17:47:26 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32330 Hello Everyone, I'd like to ask for a help with configuration of MAC learning on a VLAN. I have three switches, same VLAN on every switch and some cu 10 Nov 2011 07:05:46 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32300 Hello, dear list. I'm planning to catch an old EOL'd Summit5i switch for hobbyist needs. I'm very interesting in getting the latest available Extreme 05 Nov 2011 10:51:00 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32253 hello, I have configured a VLAN with IP protocol allowed only (0x0800 and 0x0806). But, on broadcast on this vlan I can still see this: 20:14:30.74 19 Oct 2011 04:40:22 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32057 Hello, i have a Blackdiamond with 8 VLANs configured... VLAN1,10,20,30,40,50,60,70 One Port ist configured with TagAll to my Firewall (Sonicwa 19 Oct 2011 00:47:49 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/32044 hello, I need to buy XGM-2xn modules, if some of you have some used for sale - I'll be interested. It is for Summit400 and SummitX450 (no a). Regar 05 Oct 2011 04:00:56 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31836 Hi Marcin, What is really your problem? Do you have issue when an EAPS topology change occurs ? If so, do you have the multicast support enabled on 04 Oct 2011 10:02:22 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31830 hello, I have noticed an issue, that sometimes some mac addresses are not visible in FDB on x650 stack. I have several x450 in chain-patch from cus 04 Oct 2011 05:17:13 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31827 hello, my network is build on: - x650 - center of the network - many x450 (no x450a) on surrounding rings and branches - some summit400 and one Alpin 03 Oct 2011 02:47:32 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31818 Good all day! In a network I use 8806 as L3 the terminator. First of all the platform 8800 has interested as resurso-distributed, that is on each slot 02 Oct 2011 18:58:44 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31815 hello, I want to move from old STP to RSTP, this should be quite simple as we have only s0 domain. But, my question is - how about compatilibilit o 16 Sep 2011 04:53:59 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31615 hello, what may happen if STP network becomes too large without tunning STP parameters ? I mean, if I have like 9-10 STP hops and STP parameters fo 07 Sep 2011 14:02:17 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31479 I have a requirment of rate-limiting igress/egress traffic on a port on Extremeware platform..(Extreme 400 ,BD-6808 & Summit-5i) .Is this possible on 07 Sep 2011 13:53:40 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31478 hello, who knows how can I read this counters: ???? SummitX450-Kil26.5 # show fdb stats Total: 7986 Static: 0 Perm: 0 Dyn: 7986 Dropped: 0 FDB Agin 07 Sep 2011 04:14:42 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31470 Dear All! Please, help to find newer version XOS than bd8800-12.4.2.17, in an ideal 12.4.3.5 or 12.5.4.5 I 8806 is collected in parts on ebay and Extr 06 Sep 2011 13:28:27 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31450 hello, I have a simple stack: Slot-1 SummitStack-GZE.2 # show temperature Field Replaceable Units Temp (C) Status Min Normal Max 20 Aug 2011 03:54:58 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31215 Colleagues, hi licensing guide in ExOS concept guide says, that x150 comes with L2 Edge License and can't be upgraded to Edge License. Does it mean, 15 Aug 2011 07:10:52 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/31143 Pretty obvious. I've got a 3802 that was never upgraded. According to the docs, I need to first upgrade to 6.1.8 B79 "TFTP download ExtremeWare 6.1. 28 Jul 2011 19:06:15 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30894 hello, what does that mean: ?? 07/27/2011 14:28:09.79 <Crit:HAL.Sys.Critical> Slot-1: BCM error detected on unit 3 07/27/2011 13:06:59.80 <Crit:HAL. 27 Jul 2011 07:32:20 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30860 Hi guys, I'm going to test a bunch of Extreme devices (Summit series - x350/x450/x650/x480) and, to get the best, want to use the latest the most s 19 Jul 2011 23:41:53 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30747 Hi, when looking into detailed network info, it shows right communities here: _eel.35 # sh bgp routes detail network 31.41.120.0/21_ Feasible Route 18 Jul 2011 03:34:48 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30733 Colleagues, hi whether it's possible, when working in ExOS CLI, get the following information: like Cisco's CLI, "sh ip route x.x.x.x" shows me the 30 Jun 2011 22:37:14 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30578 Colleagues, hi I'm completely new to Extreme hardware/software and need your help to quickly resolve one issue, which is important to be implemented 30 Jun 2011 13:21:25 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30572 hello, maybe here is somebody who knows if there is a chance for: - more than one mirror port in x650 - mirror running on sharing group ? As far n 20 Jun 2011 05:59:58 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30361 hello, I have seen in Cisco switches such an option like Broadcast storm control. It was possible to set up a limit of broadcasts (not sure if per po 09 Jun 2011 15:23:20 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30201 Hi, I have a couple of questions. Have searched the archives and didnt find much, hopefully someone here can advise. We are wanting to replace some 07 Jun 2011 13:53:10 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/30056 i have found info in the docs that indicate that to do inbound rate limiting you have to burn an extra port and do vlan magic. but elsewhere i see re 25 Apr 2011 17:13:43 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/29106 Antonie falco wrote: > Hello Marcin, > > I am of the understanding that the XCRP3 has specific requirements for > slot0 and 1. > > From memory it 21 Apr 2011 02:25:52 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/29057 hello, we are having some strange issues with our IPTV service. Service provider is external, connected in this way: ProvidersPIM(cisco)---SummitX6 14 Apr 2011 15:19:04 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/28887 hello, I know that ELSM is inlcuded intu ExtremeWare (7.8.3 in my case). However - why on Summit400 platforms I can't see proper commands to use it ? 27 Mar 2011 16:13:53 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/28538 I am trying to learn QoS configuration on Extreme. The documentation is a bit confusing and unclear for me. Is there any other resource anyone would 17 Mar 2011 13:08:30 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/28336 hello all, anyone successfully tried in mentioned subject and works? my setup: bd8810 [1:21] --- [21] x460 I did the normal STP configurations but s 15 Mar 2011 07:59:56 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/28245 hello, anyone knows how to use debug-mode in XOS ?? (enable debug-mode) Regards, Marcin _______________________________________________ extreme-nsp 11 Mar 2011 08:41:27 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/28181 hello, anybody noticed any strange behaviour when you provide command delete vlan xxx ?? Vlan in on ports where STP is active, that's all. In some 08 Mar 2011 07:51:25 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/28076 hello, new ssh licensing is quite clear, except one case. What if I have a lot of second hand x450 switches and I would like to get licenses for ssh 05 Mar 2011 14:59:18 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/28046 Look here: Slot-1 SummitStack-GZE.9 # configure ports 1:19,1:20 auto off speed 1000 duplex full Error: Speed change is not allowed on port 1:19 as 23 Feb 2011 03:46:10 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/27719 Robert Jacobs wrote: >>From our experience you have to many mcast flows /groups. The 450 has very limited memory buckets that are shared between rout 23 Jan 2011 02:19:26 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/27143 Hello, summit x450, ExtremeXOS version 12.4.2.17 v1242b17-patch1-10 IPTV fails, switch is logging info as below. Anyone knows what could be wrong ? 21 Jan 2011 12:38:24 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/27133 hello, look here: The following hardware is no longer supported in ExtremeXOS 12.5.1: �-� BlackDiamond 8800 original series modules: - G48T - G48P - 08 Jan 2011 05:01:26 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/26783 hello, Is there anyone who knows, if XOS 12.5 is available for Summit series ? Regards, Marcin _______________________________________________ extre 03 Jan 2011 07:15:45 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/26736 Hello, I know this is a rather stupid question but is their any way to list the mac address of a given switch port ? I've already tried : - show s 17 Dec 2010 15:37:07 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/26577 Hi, Is it possible to do per-port ingress & egress rate-limiting/policing on Extreme Summit X450? 10 Nov 2010 21:55:43 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/26138 Hello, I want to deploy 802.1x authentication for network hosts that support it. I managed to make 802.1x to work on the switch. ... # enable netl 29 Oct 2010 14:22:44 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25870 Hi, Can anyone share experience using this extreme feature in a metro ethernet environment in production? Regards, Samit ___________________________ 08 Oct 2010 01:12:35 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25530 I configured the switch like you adviced. The only difference is that I configured the mirroring on a transit switch, because there I've enough gigabi 30 Sep 2010 08:03:27 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25439 No matter whether it is XOS Version 12.4.1.7 v1241b7-patch1-7 nor EW-Version 7.8e.2.1, at a certain time, mainly between 12.00 to 01.00 pm I get hund 28 Sep 2010 00:07:52 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25350 hello, anyone can say if this looks like termporary software or permanent hardware fault ? Regards, Marcin 09/09/2010 11:18:19.51 <Warn:Kern.Car 27 Sep 2010 05:57:37 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25305 Hi, I have an X450 switch with lots of servers connected to it. Some servers have shown strange behaviour when it comes to the ethernet link towards 23 Sep 2010 14:15:48 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25243 hello, if someone uses XGM2-2xn in Summit400 or X450 - is it necessary to put there only original extreme xenpak modules or i.e. cisco modules work 21 Sep 2010 13:05:04 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25207 hello, once again I need to ask - is there anyone having unnecessary, used XGM2-2xn modules and having a will to sell them ? Maybe some recent decom 20 Sep 2010 13:56:01 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25203 Hi, I have an x450-48p that has been working fine for a few years until today, I get this on boot: Extreme Networks ............................... 07 Sep 2010 09:20:22 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/25024 hello, this is an example to XOS tacacs request to tacacs server: 08/09/2010 12:33:41.85 <Info:AAA.TACACS.authReqSent> Slot-1: Sent authentication r 11 Aug 2010 06:40:08 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/24596 hello, I have a strange problem, there is a Summit400-48t switch with this license: Platform: Summit400-48t License: Advanced Edge + 10 Aug 2010 13:34:51 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/24581 I have several Summit400-48t running in our environment and in the last two weeks I have had two that seem to temporarily stop learning mac-address 09 Jul 2010 21:58:59 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/24182 Hi, I need little bit help out here. Cisco config: spanning-tree mst configuration name Region1 revision 3 instance 1 vlan 2-10 instance 2 vlan 21 May 2010 05:00:40 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/23372 hello, I had a little discussion today about ExtremeWare 7.8 and route map. There was an ospf route-map created, but this route map was not in show 18 May 2010 15:05:55 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/23342 hello, is it possible to modify a sharing algorythm and other properties of already configured sharing group ? what I have is: Slot-1 SummitStack-G 26 Apr 2010 09:13:48 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/22831 Hello Everyone, I was wondering if anyone (operator) in this list who has experience running a metro carrier ethernet deploying purely extreme switch 21 Apr 2010 01:58:11 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/22754 hello, I have a little issue here. There is a DWDM channel with max bitrate 2488.32Mbit/s. Currently it is running as 1Gbit/s, but.. I need to utiliz 12 Apr 2010 08:11:40 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/22704 hello, could anyone help me with understanding extreme ware access lists ??? There is a case, that a single IP address should be locked on a physica 07 Apr 2010 06:23:44 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/22622 Hi All, We are looking into purchasing a pair of BD WDMi cards to use over our current fibre infrastructure. We currently have a 300m run of 3 26 Mar 2010 13:07:10 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/22424 hello, How can I read counters of stacking port in x650(SS) ? mrtg by default doesn't read them. Regards, Marcin ___________________________________ 20 Mar 2010 06:10:36 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/22307 I am using a Extreme X-350-24t with ExtremeXOS version 12.0.4.5 v1204b5 I noticed that if two frames with the same MAC address come in on totally dif 09 Mar 2010 08:51:22 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/21933 hello, today I had a loop between devices, when switching one link from Alpine do SummitX650. All vlans are in stpd s0 domain, ports are stpd enabl 23 Feb 2010 08:01:52 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/21725 hello, on the Alpine switch I could create a sharing group i.e. of 4 ports, and then this group could be used as a mirror port. In x650 I can't do 22 Feb 2010 11:28:05 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/21713 hello, I have 2x Summit X650 switch connected with standard stack VIM (2x10Gbit/s). But.. Stack Port 1: State : Op 21 Feb 2010 12:35:24 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/21704 Hi, Is somebody knows that is it mean in logs at extreme-450 : <Warn:HAL.IPv4Mc.GrpTblFull> IPv4 multicast entry not added. Hardware Group Tabl 18 Jan 2010 04:44:50 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/21001 hello, I'am trying to test LegacyCLI module for x450. However, it seems not to be seen by the system. Current State: OPERATIONAL Image Selected: 10 Jan 2010 06:14:12 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20907 Hi, Can someone tell me how to rate-limit a port/vlan on Extreme 8800 series switches ingress, I know it works in combination with an acl. Regards, 10 Jan 2010 05:02:14 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20905 In my Extreme� 200 Summit I�am Receiving�a errormessage in my log file .so kindly anyone have solution to resolve this issue �09/26/2007 16:11:34.23 07 Jan 2010 00:56:04 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20837 I have a question about using STP and EAPS. If, for example, I have 4 switches on EAPS ring. A -> B -> C -> D -> back to A A & B is at the same loc 05 Jan 2010 18:36:44 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20818 Hi all, Summit 400 running EW 7.5 - Can spanning tree run ports in portfast mode? Having a DHCP problem and if I disable spanning tree on the port i 29 Dec 2009 14:35:06 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20743 hello, does any one knows if the Summit x450-24x (not x450a, so the first x450) will work with 2xSFP+ 10G module (or any newer than for XENPAK) ??? 29 Dec 2009 13:08:59 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20741 Hello, I just go myself new refurbished Extreme Blackdiamond 6808. Are there any best practices how to test and diagnose hardware, besides running 's 21 Dec 2009 07:58:53 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20663 hello, I was told, that chipset from Summit x650 is able to handle 1, 2.5 and 10G per port. Is it software able to handle 2.5Gbit/s speed at 10G po 04 Dec 2009 03:10:03 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20489 hello, I have a question regarding x650 depth. Depth: 26 Inches/65.5 cm Well, does the 26 Inches / 65.6 cm include power cord, PSU handles, VIM ha 02 Dec 2009 06:18:44 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20437 hello, I'am going to purchase x650 as a main switch for our central site. Well, in fact - 2x x650, the second will be our on site insurance. Do you 23 Nov 2009 13:09:21 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20342 Robert Jacobs wrote: > The correct card for the 400 is for sure the 16111 card. It is > different that the 16112 and 16113 cards. It is also twice a 22 Nov 2009 12:09:44 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20327 hello, the documentation of Summit 400-48t sais, that the extension module is XGM2-2xn. That's exactly the same module as for x450a. Ok, but - Summ 22 Nov 2009 06:31:26 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/20326 hello, Is there anyone that could tell me, what are the codes (Part Number) of Extreme CWDM SFPs ??? I.e. Extreme SX SFP has Part Numer FTM-8012C-S 31 Aug 2009 07:41:03 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/19231 We've got a lot of Extreme 6808 stuff for sale. Contact me offlist if you are interested. Qty:4 BD6808 chassis with 2 power supplies. Qty:4 extra 20 Jul 2009 12:36:26 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/18754 hello, I'am just testing sharing in Summit400-48t and... there is only dynamic algorythm that sais: * Summit400-48t:16 # enable sharing 47 grouping 14 Jul 2009 05:49:40 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/18699 hello, is it possible that Summit24e3 has some problems with relaying this packet: 14:09:02.207208 00:30:88:12:05:9f > 33:33:ff:45:00:01, ethertype 13 May 2009 05:23:36 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/18159 hello, is it normal that when one PSU in Alpine goes down (power or fault) the switch reboots ? Regards, Marcin ___________________________________ 12 Mar 2009 13:42:57 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/17534 hello, could you tell me how is the QinQ working in Summit5i/Alpine switches ? I see almost no documentation about that (or maybe I use wrong keywor 04 Mar 2009 12:47:39 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/17428 hello, How is it resolved in Summit 400 or Summit x450e with foregin SFP modules ? Are they accepted ? Or only ExtremeNetworks branded ??? Regards, 13 Feb 2009 01:57:07 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/17097 Hi, I am running XOS 12.0.4.5 on a SummitX450 and I am trying to install the latest SSH software module: summitX-12.1.2.17-ssh.xmod. When trying to 08 Jan 2009 22:27:57 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/16677 Marcin Kuczera wrote: > hello, sorry, that was supposed to go to redback group, Regards, Marcin > > could anyone explain me how can I create an ag 23 Nov 2008 13:22:11 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/16334 hello, could anyone explain me how can I create an aggregate and then advertise it once one of the subscribers route appears ? interface ip-pool 23 Nov 2008 12:40:06 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/16335 Hello, Does anyone know the compatibility of extreme networks VMan ethernet encapsulation with other vendors 802.1ad/QinQ ? I've read 88 19 Nov 2008 23:33:06 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/16277 hello, Well, I don't know all the abbreviation, but - is there a possibility to bind 2 gigabit ports together and make them to be something like et 24 Oct 2008 06:17:03 -0800 http://www.gossamer-threads.com/lists/nsp/extreme/15940