thelastman at gmail
Nov 14, 2011, 4:18 PM
Post #2 of 3
(621 views)
Permalink
|
|
Re: How do I find the driver version for the FC HBA's on my 3170?
[In reply to]
|
|
I suspect, the version of OnTap you are on, sysconfig -av and
sysconfig -ac should suffice. Just look for your fcp target ports out
of that. Should look something like this.
slot 0: Fibre Channel Target Host Adapter 0c
(Dual-channel, QLogic 2532 (2562) rev. 2, 32-bit, <ONLINE>)
Firmware rev: 5.3.0
Host Port Addr: 010c00
Cacheline size: 16
SRAM parity: Yes
FC Nodename: 00:00:00:00:00:00:00:00 (0000000000000000)
FC Portname: 00:00:00:00:00:00:00:00 (0000000000000000)
Connection: PTP, Fabric
SFP Vendor Name: AVAGO
SFP Vendor P/N: AFBR-57D7APZ-NA1
SFP Vendor Rev:
SFP Serial No.: AAsomething4
SFP Connector: LC
SFP Capabilities: 2, 4, 8 Gbit/Sec
Will that suffice?
-Blake
On Mon, Nov 14, 2011 at 3:50 PM, Randy Rue <rrue [at] fhcrc> wrote:
> Upgrading the attached SAN and the vendor wants to know this...
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters
>
_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters
|
