Mailing List Archive: Netapp: toasters

8.0.2p1

Index | Next | Previous | View Threaded

sklise at hotmail

Aug 31, 2011, 6:11 PM

Post #1 of 21 (2741 views)
Permalink

8.0.2p1

Figured I would ask the crowed this one... I have a current issue with a version of ontap (8x) and we have been working with support to reproduce in our lab and at Netapp (NDMP is not working with some of our vols). Make a long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2, then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't RTFM going backwards... So it was bad). I had to go on vaction and a Netapp SE came onsight to repair and get the filer back up to 8.x for the support folks. I was not there, but the current filer is running is runnin OT 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
Problem:filerview is not launching, and I don't think it ever has worked since 8.0.1p2. I compared to another files options, and they all seemed in order. I also ran the software download and rebooted. What is strange is I can telnet to port 80, but I get a 404 errror. I tried via IP, via ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast it... Any suggestions is appreciated..

chaim.rieger at gmail

Aug 31, 2011, 6:18 PM

Post #2 of 21 (2709 views)
Permalink

Re: 8.0.2p1 [In reply to]

Can you access it via the ip address
On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:
>
> Figured I would ask the crowed this one... I have a current issue with a
version of ontap (8x) and we have been working with support to reproduce in
our lab and at Netapp (NDMP is not working with some of our vols). Make a
long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
SE came onsight to repair and get the filer back up to 8.x for the support
folks. I was not there, but the current filer is running is runnin OT
8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
> Problem:filerview is not launching, and I don't think it ever has worked
since 8.0.1p2. I compared to another files options, and they all seemed in
order. I also ran the software download and rebooted. What is strange is I
can telnet to port 80, but I get a 404 errror. I tried via IP, via
ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
it... Any suggestions is appreciated..

klises at sutterhealth

Aug 31, 2011, 6:21 PM

Post #3 of 21 (2713 views)
Permalink

Re: 8.0.2p1 [In reply to]

Nope.

Tried IP name, fully qualfied name, different browser IE6 8 9

From: Chaim Rieger [mailto:chaim.rieger [at] gmail]
Sent: Wednesday, August 31, 2011 06:18 PM
To: steve klise <sklise [at] hotmail>
Cc: toasters [at] teaparty <toasters [at] teaparty>
Subject: Re: 8.0.2p1

Can you access it via the ip address

On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail<mailto:sklise [at] hotmail>> wrote:
>
> Figured I would ask the crowed this one... I have a current issue with a version of ontap (8x) and we have been working with support to reproduce in our lab and at Netapp (NDMP is not working with some of our vols). Make a long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2, then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't RTFM going backwards... So it was bad). I had to go on vaction and a Netapp SE came onsight to repair and get the filer back up to 8.x for the support folks. I was not there, but the current filer is running is runnin OT 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
> Problem:filerview is not launching, and I don't think it ever has worked since 8.0.1p2. I compared to another files options, and they all seemed in order. I also ran the software download and rebooted. What is strange is I can telnet to port 80, but I get a 404 errror. I tried via IP, via ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast it... Any suggestions is appreciated..

tmacmd at gmail

Aug 31, 2011, 7:11 PM

Post #4 of 21 (2706 views)
Permalink

Re: 8.0.2p1 [In reply to]

Just curious...

Have you tried re-installing the software and rebooting?

i.e.
software install 802p1.tgz
download
reboot

--tmac
Tim McCarthy
Principal Consultant

On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth> wrote:
> Nope.
>
> Tried IP name, fully qualfied name, different browser IE6 8 9
>
> From: Chaim Rieger [mailto:chaim.rieger [at] gmail]
> Sent: Wednesday, August 31, 2011 06:18 PM
> To: steve klise <sklise [at] hotmail>
> Cc: toasters [at] teaparty <toasters [at] teaparty>
> Subject: Re: 8.0.2p1
>
>
> Can you access it via the ip address
>
> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:
>>
>> Figured I would ask the crowed this one... I have a current issue with a
>> version of ontap (8x) and we have been working with support to reproduce in
>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>> SE came onsight to repair and get the filer back up to 8.x for the support
>> folks. I was not there, but the current filer is running is runnin OT
>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>> Problem:filerview is not launching, and I don't think it ever has worked
>> since 8.0.1p2. I compared to another files options, and they all seemed in
>> order. I also ran the software download and rebooted. What is strange is I
>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>> it... Any suggestions is appreciated..
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

klises at sutterhealth

Aug 31, 2011, 7:17 PM

Post #5 of 21 (2711 views)
Permalink

Re: 8.0.2p1 [In reply to]

Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet.
Thanks for the suggestion.

Strange issue.

----- Original Message -----
From: tmac [mailto:tmacmd [at] gmail]
Sent: Wednesday, August 31, 2011 07:11 PM
To: Klise, Steve
Cc: chaim.rieger [at] gmail <chaim.rieger [at] gmail>; sklise [at] hotmail <sklise [at] hotmail>; toasters [at] teaparty <toasters [at] teaparty>
Subject: Re: 8.0.2p1

Just curious...

Have you tried re-installing the software and rebooting?

i.e.
software install 802p1.tgz
download
reboot

--tmac
Tim McCarthy
Principal Consultant

On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth> wrote:
> Nope.
>
> Tried IP name, fully qualfied name, different browser IE6 8 9
>
> From: Chaim Rieger [mailto:chaim.rieger [at] gmail]
> Sent: Wednesday, August 31, 2011 06:18 PM
> To: steve klise <sklise [at] hotmail>
> Cc: toasters [at] teaparty <toasters [at] teaparty>
> Subject: Re: 8.0.2p1
>
>
> Can you access it via the ip address
>
> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:
>>
>> Figured I would ask the crowed this one... I have a current issue with a
>> version of ontap (8x) and we have been working with support to reproduce in
>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>> SE came onsight to repair and get the filer back up to 8.x for the support
>> folks. I was not there, but the current filer is running is runnin OT
>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>> Problem:filerview is not launching, and I don't think it ever has worked
>> since 8.0.1p2. I compared to another files options, and they all seemed in
>> order. I also ran the software download and rebooted. What is strange is I
>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>> it... Any suggestions is appreciated..
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

dsiggins at maileig

Aug 31, 2011, 7:50 PM

Post #6 of 21 (2767 views)
Permalink

RE: 8.0.2p1 [In reply to]

Greetings,
Does netstat show anything? Can you initiate an tcpdump from the filer and look at port 80 or 443?

I just checked on my ONTAP 8 7 mode filer and I can see 443 connections in netstat but ofcourse my filerview is working fine.

-----Original Message-----
From: toasters-bounces [at] teaparty on behalf of Klise, Steve
Sent: Wed 8/31/2011 10:17 PM
To: 'tmacmd [at] gmail'
Cc: 'toasters [at] teaparty'
Subject: Re: 8.0.2p1

Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet.
Thanks for the suggestion.

Strange issue.

----- Original Message -----
From: tmac [mailto:tmacmd [at] gmail]
Sent: Wednesday, August 31, 2011 07:11 PM
To: Klise, Steve
Cc: chaim.rieger [at] gmail <chaim.rieger [at] gmail>; sklise [at] hotmail <sklise [at] hotmail>; toasters [at] teaparty <toasters [at] teaparty>
Subject: Re: 8.0.2p1

Just curious...

Have you tried re-installing the software and rebooting?

i.e.
software install 802p1.tgz
download
reboot

--tmac
Tim McCarthy
Principal Consultant

On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth> wrote:
> Nope.
>
> Tried IP name, fully qualfied name, different browser IE6 8 9
>
> From: Chaim Rieger [mailto:chaim.rieger [at] gmail]
> Sent: Wednesday, August 31, 2011 06:18 PM
> To: steve klise <sklise [at] hotmail>
> Cc: toasters [at] teaparty <toasters [at] teaparty>
> Subject: Re: 8.0.2p1
>
>
> Can you access it via the ip address
>
> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:
>>
>> Figured I would ask the crowed this one... I have a current issue with a
>> version of ontap (8x) and we have been working with support to reproduce in
>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>> SE came onsight to repair and get the filer back up to 8.x for the support
>> folks. I was not there, but the current filer is running is runnin OT
>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>> Problem:filerview is not launching, and I don't think it ever has worked
>> since 8.0.1p2. I compared to another files options, and they all seemed in
>> order. I also ran the software download and rebooted. What is strange is I
>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>> it... Any suggestions is appreciated..
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

dsiggins at maileig

Aug 31, 2011, 7:59 PM

Post #7 of 21 (2714 views)
Permalink

RE: 8.0.2p1 [In reply to]

Other two suggestions:
1. check the options httpd.admin (ssl)
2. check the hosts.allow

It seems given you've re-installed ontap all of the files should be in the correct spot.

-----Original Message-----
From: toasters-bounces [at] teaparty on behalf of Klise, Steve
Sent: Wed 8/31/2011 10:17 PM
To: 'tmacmd [at] gmail'
Cc: 'toasters [at] teaparty'
Subject: Re: 8.0.2p1

Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet.
Thanks for the suggestion.

Strange issue.

----- Original Message -----
From: tmac [mailto:tmacmd [at] gmail]
Sent: Wednesday, August 31, 2011 07:11 PM
To: Klise, Steve
Cc: chaim.rieger [at] gmail <chaim.rieger [at] gmail>; sklise [at] hotmail <sklise [at] hotmail>; toasters [at] teaparty <toasters [at] teaparty>
Subject: Re: 8.0.2p1

Just curious...

Have you tried re-installing the software and rebooting?

i.e.
software install 802p1.tgz
download
reboot

--tmac
Tim McCarthy
Principal Consultant

On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth> wrote:
> Nope.
>
> Tried IP name, fully qualfied name, different browser IE6 8 9
>
> From: Chaim Rieger [mailto:chaim.rieger [at] gmail]
> Sent: Wednesday, August 31, 2011 06:18 PM
> To: steve klise <sklise [at] hotmail>
> Cc: toasters [at] teaparty <toasters [at] teaparty>
> Subject: Re: 8.0.2p1
>
>
> Can you access it via the ip address
>
> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:
>>
>> Figured I would ask the crowed this one... I have a current issue with a
>> version of ontap (8x) and we have been working with support to reproduce in
>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>> SE came onsight to repair and get the filer back up to 8.x for the support
>> folks. I was not there, but the current filer is running is runnin OT
>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>> Problem:filerview is not launching, and I don't think it ever has worked
>> since 8.0.1p2. I compared to another files options, and they all seemed in
>> order. I also ran the software download and rebooted. What is strange is I
>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>> it... Any suggestions is appreciated..
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

kgraham at industrial-marshmallow

Aug 31, 2011, 8:51 PM

Post #8 of 21 (2712 views)
Permalink

Re: 8.0.2p1 [In reply to]

+1 on this. Broken ndmp (were -any- volumes working?) and 404's from filer view both point to a partial/flash-only install...

On Aug 31, 2011, at 7:11 PM, tmac wrote:

> Just curious...
>
> Have you tried re-installing the software and rebooting?
>
> i.e.
> software install 802p1.tgz
> download
> reboot
>
> --tmac
> Tim McCarthy
> Principal Consultant
>
>
>
> On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth> wrote:
>> Nope.
>>
>> Tried IP name, fully qualfied name, different browser IE6 8 9
>>
>> From: Chaim Rieger [mailto:chaim.rieger [at] gmail]
>> Sent: Wednesday, August 31, 2011 06:18 PM
>> To: steve klise <sklise [at] hotmail>
>> Cc: toasters [at] teaparty <toasters [at] teaparty>
>> Subject: Re: 8.0.2p1
>>
>>
>> Can you access it via the ip address
>>
>> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:
>>>
>>> Figured I would ask the crowed this one... I have a current issue with a
>>> version of ontap (8x) and we have been working with support to reproduce in
>>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>>> SE came onsight to repair and get the filer back up to 8.x for the support
>>> folks. I was not there, but the current filer is running is runnin OT
>>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>>> Problem:filerview is not launching, and I don't think it ever has worked
>>> since 8.0.1p2. I compared to another files options, and they all seemed in
>>> order. I also ran the software download and rebooted. What is strange is I
>>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>>> it... Any suggestions is appreciated..
>>
>> _______________________________________________
>> Toasters mailing list
>> Toasters [at] teaparty
>> http://www.teaparty.net/mailman/listinfo/toasters
>>
>>
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

eino at utu

Aug 31, 2011, 8:52 PM

Post #9 of 21 (2717 views)
Permalink

Re: 8.0.2p1 [In reply to]

Hello,

I had to run secureadmin command after upgrade to 8.0.2 to access FilerView.

Eino Tuominen

On 1.9.2011, at 6.16, "Douglas Siggins" <dsiggins [at] maileig<mailto:dsiggins [at] maileig>> wrote:

Other two suggestions:
1. check the options httpd.admin (ssl)
2. check the hosts.allow

It seems given you've re-installed ontap all of the files should be in the correct spot.

-----Original Message-----
From: toasters-bounces [at] teaparty<mailto:toasters-bounces [at] teaparty> on behalf of Klise, Steve
Sent: Wed 8/31/2011 10:17 PM
To: 'tmacmd [at] gmail<mailto:tmacmd [at] gmail>'
Cc: 'toasters [at] teaparty<mailto:toasters [at] teaparty>'
Subject: Re: 8.0.2p1

Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet.
Thanks for the suggestion.

Strange issue.

----- Original Message -----
From: tmac [<mailto:tmacmd [at] gmail>mailto:tmacmd [at] gmail]
Sent: Wednesday, August 31, 2011 07:11 PM
To: Klise, Steve
Cc: chaim.rieger [at] gmail<mailto:chaim.rieger [at] gmail> <chaim.rieger [at] gmail<mailto:chaim.rieger [at] gmail>>; sklise [at] hotmail<mailto:sklise [at] hotmail> <sklise [at] hotmail<mailto:sklise [at] hotmail>>; toasters [at] teaparty<mailto:toasters [at] teaparty> <toasters [at] teaparty<mailto:toasters [at] teaparty>>
Subject: Re: 8.0.2p1

Just curious...

Have you tried re-installing the software and rebooting?

i.e.
software install 802p1.tgz
download
reboot

--tmac
Tim McCarthy
Principal Consultant

On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth<mailto:klises [at] sutterhealth>> wrote:
> Nope.
>
> Tried IP name, fully qualfied name, different browser IE6 8 9
>
> From: Chaim Rieger [<mailto:chaim.rieger [at] gmail>mailto:chaim.rieger [at] gmail]
> Sent: Wednesday, August 31, 2011 06:18 PM
> To: steve klise <sklise [at] hotmail<mailto:sklise [at] hotmail>>
> Cc: toasters [at] teaparty<mailto:toasters [at] teaparty> <toasters [at] teaparty<mailto:toasters [at] teaparty>>
> Subject: Re: 8.0.2p1
>
>
> Can you access it via the ip address
>
> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail<mailto:sklise [at] hotmail>> wrote:
>>
>> Figured I would ask the crowed this one... I have a current issue with a
>> version of ontap (8x) and we have been working with support to reproduce in
>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>> SE came onsight to repair and get the filer back up to 8.x for the support
>> folks. I was not there, but the current filer is running is runnin OT
>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>> Problem:filerview is not launching, and I don't think it ever has worked
>> since 8.0.1p2. I compared to another files options, and they all seemed in
>> order. I also ran the software download and rebooted. What is strange is I
>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>> it... Any suggestions is appreciated..
>
> _______________________________________________
> Toasters mailing list
> <mailto:Toasters [at] teaparty> Toasters [at] teaparty<mailto:Toasters [at] teaparty>
> <http://www.teaparty.net/mailman/listinfo/toasters> http://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
<mailto:Toasters [at] teaparty>Toasters [at] teaparty<mailto:Toasters [at] teaparty>
<http://www.teaparty.net/mailman/listinfo/toasters>http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters [at] teaparty<mailto:Toasters [at] teaparty>
http://www.teaparty.net/mailman/listinfo/toasters

sklise at hotmail

Aug 31, 2011, 9:00 PM

Post #10 of 21 (2709 views)
Permalink

RE: 8.0.2p1 [In reply to]

tried that too. When I did the reinstall, I just did the software download <filename>; then rebooted. Did I have to do install even though it was the same version? I will check the hosts.allow. Interesting that port 443 and 80 are listening for that filer IP.. but I get the 404 error, not even the "HTTP is not enabled" screen appears... Thank again for the suggestions, and responses everyone.. I got more to try..
From: eino [at] utu
To: dsiggins [at] maileig
Subject: Re: 8.0.2p1
Date: Thu, 1 Sep 2011 03:52:37 +0000
CC: toasters [at] teaparty; klises [at] sutterhealth

Hello,

I had to run secureadmin command after upgrade to 8.0.2 to access FilerView.

Eino Tuominen

On 1.9.2011, at 6.16, "Douglas Siggins" <dsiggins [at] maileig> wrote:

Other two suggestions:

1. check the options httpd.admin (ssl)

2. check the hosts.allow

It seems given you've re-installed ontap all of the files should be in the correct spot.

-----Original Message-----

From: toasters-bounces [at] teaparty on behalf of Klise, Steve

Sent: Wed 8/31/2011 10:17 PM

To: 'tmacmd [at] gmail'

Cc: 'toasters [at] teaparty'

Subject: Re: 8.0.2p1

Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet.

Thanks for the suggestion.

Strange issue.

----- Original Message -----

From: tmac [mailto:tmacmd [at] gmail]

Sent: Wednesday, August 31, 2011 07:11 PM

To: Klise, Steve

Cc: chaim.rieger [at] gmail <chaim.rieger [at] gmail>;
sklise [at] hotmail <sklise [at] hotmail>;
toasters [at] teaparty <toasters [at] teaparty>

Subject: Re: 8.0.2p1

Just curious...

Have you tried re-installing the software and rebooting?

i.e.

software install 802p1.tgz

download

reboot

--tmac

Tim McCarthy

Principal Consultant

On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth> wrote:

> Nope.

>

> Tried IP name, fully qualfied name, different browser IE6 8 9

>

> From: Chaim Rieger [mailto:chaim.rieger [at] gmail]

> Sent: Wednesday, August 31, 2011 06:18 PM

> To: steve klise <sklise [at] hotmail>

> Cc: toasters [at] teaparty <toasters [at] teaparty>

> Subject: Re: 8.0.2p1

>

>

> Can you access it via the ip address

>

> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:

>>

>> Figured I would ask the crowed this one... I have a current issue with a

>> version of ontap (8x) and we have been working with support to reproduce in

>> our lab and at Netapp (NDMP is not working with some of our vols). Make a

>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,

>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't

>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp

>> SE came onsight to repair and get the filer back up to 8.x for the support

>> folks. I was not there, but the current filer is running is runnin OT

>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.

>> Problem:filerview is not launching, and I don't think it ever has worked

>> since 8.0.1p2. I compared to another files options, and they all seemed in

>> order. I also ran the software download and rebooted. What is strange is I

>> can telnet to port 80, but I get a 404 errror. I tried via IP, via

>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast

>> it... Any suggestions is appreciated..

>

> _______________________________________________

> Toasters mailing list

> Toasters [at] teaparty

> http://www.teaparty.net/mailman/listinfo/toasters

>

>

_______________________________________________

Toasters mailing list

Toasters [at] teaparty

http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________

Toasters mailing list

Toasters [at] teaparty

http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

klises at sutterhealth

Aug 31, 2011, 9:08 PM

Post #11 of 21 (2710 views)
Permalink

RE: 8.0.2p1 [In reply to]

Douglas, thank you SIR!

httpd.admin.enable on

Thought I checked all the options against another filer.. Guess not..

fixed.. done..
awesome!!

Regards

Steve Klise

Storage Engineer, NCDA

__________________________

PALO ALTO MEDICAL FOUNDATION

SUTTER HEALTH INFORMATION SERVICES

PENINSULA COASTAL REGION

Office: 408-523-3163 · Fax: 408-328-1406

e-mail: klises [at] sutterhealth<mailto:abouelj [at] sutterhealth>

WARNING: "All e-mail sent to or from this address will be received or otherwise recorded by the Palo Alto Medical Foundation e-mail system and is subject to archival, monitoring or review by, and/or disclosure to, someone other than the recipient."

________________________________
From: Douglas Siggins [dsiggins [at] maileig]
Sent: Wednesday, August 31, 2011 7:59 PM
To: Klise, Steve; tmacmd [at] gmail
Cc: toasters [at] teaparty
Subject: RE: 8.0.2p1

Other two suggestions:
1. check the options httpd.admin (ssl)
2. check the hosts.allow

It seems given you've re-installed ontap all of the files should be in the correct spot.

-----Original Message-----
From: toasters-bounces [at] teaparty on behalf of Klise, Steve
Sent: Wed 8/31/2011 10:17 PM
To: 'tmacmd [at] gmail'
Cc: 'toasters [at] teaparty'
Subject: Re: 8.0.2p1

Yep. Thought I had mentioned that but yes, tried the installed version. I am thinking of going back to 8.01px or a new 802D if its out there yet.
Thanks for the suggestion.

Strange issue.

----- Original Message -----
From: tmac [mailto:tmacmd [at] gmail]
Sent: Wednesday, August 31, 2011 07:11 PM
To: Klise, Steve
Cc: chaim.rieger [at] gmail <chaim.rieger [at] gmail>; sklise [at] hotmail <sklise [at] hotmail>; toasters [at] teaparty <toasters [at] teaparty>
Subject: Re: 8.0.2p1

Just curious...

Have you tried re-installing the software and rebooting?

i.e.
software install 802p1.tgz
download
reboot

--tmac
Tim McCarthy
Principal Consultant

On Wed, Aug 31, 2011 at 9:21 PM, Klise, Steve <klises [at] sutterhealth> wrote:
> Nope.
>
> Tried IP name, fully qualfied name, different browser IE6 8 9
>
> From: Chaim Rieger [mailto:chaim.rieger [at] gmail]
> Sent: Wednesday, August 31, 2011 06:18 PM
> To: steve klise <sklise [at] hotmail>
> Cc: toasters [at] teaparty <toasters [at] teaparty>
> Subject: Re: 8.0.2p1
>
>
> Can you access it via the ip address
>
> On Aug 31, 2011 9:16 PM, "steve klise" <sklise [at] hotmail> wrote:
>>
>> Figured I would ask the crowed this one... I have a current issue with a
>> version of ontap (8x) and we have been working with support to reproduce in
>> our lab and at Netapp (NDMP is not working with some of our vols). Make a
>> long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2,
>> then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't
>> RTFM going backwards... So it was bad). I had to go on vaction and a Netapp
>> SE came onsight to repair and get the filer back up to 8.x for the support
>> folks. I was not there, but the current filer is running is runnin OT
>> 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.
>> Problem:filerview is not launching, and I don't think it ever has worked
>> since 8.0.1p2. I compared to another files options, and they all seemed in
>> order. I also ran the software download and rebooted. What is strange is I
>> can telnet to port 80, but I get a 404 errror. I tried via IP, via
>> ip/Na_filer, everything I can think of.. Its in the IO lab, so I can blast
>> it... Any suggestions is appreciated..
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters
>
>

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

HollandWL at state

Sep 1, 2011, 2:40 AM

Post #12 of 21 (2717 views)
Permalink

RE: 8.0.2p1 [In reply to]

Data ONTAP 8.x changes the default communications security model from
unsecure to secure. So, http is disabled for FilerView and ssl (https)
is enabled, rsh is disabled ssh is enabled, etc. Try using
https://filername/na_admin. If you have trouble with that, a potential
problem could be corporate GPO's if you're in a Windows environment.
One we ran into in our test environment was a mandatory policy that
requires using TLS vice SSL. Data ONTAP 8.0.x does not support TLS.

From: toasters-bounces [at] teaparty
[mailto:toasters-bounces [at] teaparty] On Behalf Of steve klise
Sent: Wednesday, August 31, 2011 9:11 PM
To: toasters [at] teaparty
Subject: 8.0.2p1

Figured I would ask the crowed this one...

I have a current issue with a version of ontap (8x) and we have been
working with support to reproduce in our lab and at Netapp (NDMP is not
working with some of our vols). Make a long story short, the filer
(FAS6030) was running 7.3x, upgraded to 8.01p2, then we ran our test; it
failed, I reverted to 7.x unsuccessfully (didn't RTFM going backwards...
So it was bad).

I had to go on vaction and a Netapp SE came onsight to repair and get
the filer back up to 8.x for the support folks. I was not there, but
the current filer is running is runnin OT 8.0.2p1 and I can do the
normal console stuff, system manager, blah blah.

Problem:
filerview is not launching, and I don't think it ever has worked since
8.0.1p2. I compared to another files options, and they all seemed in
order. I also ran the software download and rebooted.

What is strange is I can telnet to port 80, but I get a 404 errror. I
tried via IP, via ip/Na_filer, everything I can think of..

Its in the IO lab, so I can blast it... Any suggestions is appreciated..

klises at sutterhealth

Sep 1, 2011, 7:05 AM

Post #13 of 21 (2705 views)
Permalink

RE: 8.0.2p1 [In reply to]

Thanks for the responses from everyone!

Regards

Steve Klise

Storage Engineer, NCDA

__________________________

PALO ALTO MEDICAL FOUNDATION

SUTTER HEALTH INFORMATION SERVICES

PENINSULA COASTAL REGION

Office: 408-523-3163 · Fax: 408-328-1406

e-mail: klises [at] sutterhealth<mailto:abouelj [at] sutterhealth>

WARNING: "All e-mail sent to or from this address will be received or otherwise recorded by the Palo Alto Medical Foundation e-mail system and is subject to archival, monitoring or review by, and/or disclosure to, someone other than the recipient."

________________________________
From: toasters-bounces [at] teaparty [toasters-bounces [at] teaparty] On Behalf Of Holland, William L [HollandWL [at] state]
Sent: Thursday, September 01, 2011 2:40 AM
To: steve klise; toasters [at] teaparty
Subject: RE: 8.0.2p1

Data ONTAP 8.x changes the default communications security model from unsecure to secure. So, http is disabled for FilerView and ssl (https) is enabled, rsh is disabled ssh is enabled, etc. Try using https://filername/na_admin. If you have trouble with that, a potential problem could be corporate GPO’s if you’re in a Windows environment. One we ran into in our test environment was a mandatory policy that requires using TLS vice SSL. Data ONTAP 8.0.x does not support TLS.

From: toasters-bounces [at] teaparty [mailto:toasters-bounces [at] teaparty] On Behalf Of steve klise
Sent: Wednesday, August 31, 2011 9:11 PM
To: toasters [at] teaparty
Subject: 8.0.2p1

Figured I would ask the crowed this one...

I have a current issue with a version of ontap (8x) and we have been working with support to reproduce in our lab and at Netapp (NDMP is not working with some of our vols). Make a long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2, then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't RTFM going backwards... So it was bad).

I had to go on vaction and a Netapp SE came onsight to repair and get the filer back up to 8.x for the support folks. I was not there, but the current filer is running is runnin OT 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.

Problem:
filerview is not launching, and I don't think it ever has worked since 8.0.1p2. I compared to another files options, and they all seemed in order. I also ran the software download and rebooted.

What is strange is I can telnet to port 80, but I get a 404 errror. I tried via IP, via ip/Na_filer, everything I can think of..

Its in the IO lab, so I can blast it... Any suggestions is appreciated..

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

evilensky at gmail

Sep 19, 2011, 6:35 PM

Post #14 of 21 (2601 views)
Permalink

Re: 8.0.2p1 [In reply to]

On Mon, Sep 19, 2011 at 8:02 PM, Salisbury, Charles
<charles.salisbury [at] gentex> wrote:
> Has this and the 8.0.2p2 release been pulled from the now site? Has anyone
> ran into any big bugs with this release? We are having oddities with the
> cluster interconnects.
>
>
Similar to this? We were eyeing 8.0.2 since it is listed as fixed:

http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=487039

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

Justin.Parisi at netapp

Sep 19, 2011, 6:43 PM

Post #15 of 21 (2616 views)
Permalink

RE: 8.0.2p1 [In reply to]

Nope, they're still up there:

http://now.netapp.com/NOW/download/software/ontap/8.0.2P1/

http://now.netapp.com/NOW/download/software/ontap/8.0.2P2/

From: Salisbury, Charles [mailto:charles.salisbury [at] gentex]
Sent: Monday, September 19, 2011 9:03 PM
To: Toasters [at] teaparty
Subject: 8.0.2p1

Has this and the 8.0.2p2 release been pulled from the now site? Has
anyone ran into any big bugs with this release? We are having oddities
with the cluster interconnects.

Charles Salisbury

LAN Services Administrator

Gentex Corporation

616-772-1800 x5090

charles.salisbury [at] gentex

masakuni.kanda at ctc-g

Sep 19, 2011, 6:52 PM

Post #16 of 21 (2604 views)
Permalink

Re: 8.0.2p1 [In reply to]

Bugs are found at our checking factory.
So, it might not be use for your systems.

(2011/09/20 10:02), Salisbury, Charles wrote:
> Has this and the 8.0.2p2 release been pulled from the now site? Has anyone ran into any big bugs with this release? We are having oddities with the cluster interconnects.
>
> Charles Salisbury
>
> LAN Services Administrator
>
> Gentex Corporation
>
> 616-772-1800 x5090
>
> charles.salisbury [at] gentex <mailto:charles.salisbury [at] gentex>
>
>
>
> _______________________________________________
> Toasters mailing list
> Toasters [at] teaparty
> http://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

Tom.DeWit at neoria

Sep 19, 2011, 11:49 PM

Post #17 of 21 (2613 views)
Permalink

Re: 8.0.2p1 [In reply to]

Hi Charles,

There are indeed problems with the cluster interconnect. I had 3 FAS3240 clusters doing a takeover because of an interconnect timeout the last 3 days.

I'm talking to Netapp Support right now about those bugs.

Tom

From: "Salisbury, Charles" <charles.salisbury [at] gentex<mailto:charles.salisbury [at] gentex>>
Date: Tue, 20 Sep 2011 03:02:55 +0200
To: "Toasters [at] teaparty<mailto:Toasters [at] teaparty>" <Toasters [at] teaparty<mailto:Toasters [at] teaparty>>
Subject: 8.0.2p1

Has this and the 8.0.2p2 release been pulled from the now site? Has anyone ran into any big bugs with this release? We are having oddities with the cluster interconnects.

Charles Salisbury
LAN Services Administrator
Gentex Corporation

616-772-1800 x5090
charles.salisbury [at] gentex<mailto:charles.salisbury [at] gentex>

evilensky at gmail

Sep 20, 2011, 6:42 AM

Post #18 of 21 (2614 views)
Permalink

Re: 8.0.2p1 [In reply to]

On Tue, Sep 20, 2011 at 1:49 AM, De Wit Tom <Tom.DeWit [at] neoria> wrote:
> Hi Charles,
> There are indeed problems with the cluster interconnect. I had 3 FAS3240
> clusters doing a takeover because of an interconnect timeout the last 3
> days.
> I'm talking to Netapp Support right now about those bugs.

Hi Tom,

do you have any referenced bug ID at this time you could share?

Thank you,
Eugene
_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

Tom.DeWit at neoria

Sep 20, 2011, 6:47 AM

Post #19 of 21 (2603 views)
Permalink

Re: 8.0.2p1 [In reply to]

I have two references, the rest is still internal only:

http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=473125 (fixed
starting 7.3.5.1P4, 8.0.1P5 then 8.0.2P1 and 8.0.2P2)
http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=497182
(7.3.5.1P4 and 8.0.2 and forward)

I had these cases escalated at Netapp Support

Grtz,
Tom

On 20/09/11 15:42, "Eugene Vilensky" <evilensky [at] gmail> wrote:

>On Tue, Sep 20, 2011 at 1:49 AM, De Wit Tom <Tom.DeWit [at] neoria> wrote:
>> Hi Charles,
>> There are indeed problems with the cluster interconnect. I had 3 FAS3240
>> clusters doing a takeover because of an interconnect timeout the last 3
>> days.
>> I'm talking to Netapp Support right now about those bugs.
>
>Hi Tom,
>
>do you have any referenced bug ID at this time you could share?
>
>Thank you,
>Eugene

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

evilensky at gmail

Sep 20, 2011, 7:52 AM

Post #20 of 21 (2605 views)
Permalink

Re: 8.0.2p1 [In reply to]

On Tue, Sep 20, 2011 at 8:47 AM, De Wit Tom <Tom.DeWit [at] neoria> wrote:
> I have two references, the rest is still internal only:
>
>
> http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=473125 (fixed
> starting 7.3.5.1P4, 8.0.1P5 then 8.0.2P1 and 8.0.2P2)
> http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=497182
> (7.3.5.1P4 and 8.0.2 and forward)
>
>
> I had these cases escalated at Netapp Support

Ugh, Bug ID 497182 is only a partial fix. Does the HA failure
generate a takeover or just disrupts potential takeovers?
_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

Tom.DeWit at neoria

Sep 20, 2011, 11:50 AM

Post #21 of 21 (2602 views)
Permalink

Re: 8.0.2p1 [In reply to]

In our case it generated an automatic takeover 3 times.

On 20/09/11 16:52, "Eugene Vilensky" <evilensky [at] gmail> wrote:

>On Tue, Sep 20, 2011 at 8:47 AM, De Wit Tom <Tom.DeWit [at] neoria> wrote:
>> I have two references, the rest is still internal only:
>>
>>
>> http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=473125 (fixed
>> starting 7.3.5.1P4, 8.0.1P5 then 8.0.2P1 and 8.0.2P2)
>> http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=497182
>> (7.3.5.1P4 and 8.0.2 and forward)
>>
>>
>> I had these cases escalated at Netapp Support
>
>Ugh, Bug ID 497182 is only a partial fix. Does the HA failure
>generate a takeover or just disrupts potential takeovers?

_______________________________________________
Toasters mailing list
Toasters [at] teaparty
http://www.teaparty.net/mailman/listinfo/toasters

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads