shoshon at shoshon
Apr 6, 2010, 5:18 AM
Post #1 of 1
(151 views)
Permalink
|
hello
does anyone have a working configuration regarding cisco sending snmp
traps on tcn ?
i mean the actual info that i am seeing in the sh span vlan xx detail
which is like this:
Number of topology changes 15 last change occurred 00:22:27 ago
from GigabitEthernet0/32
i have configured the mibs from cisco, i can receive other useful info
(interface up/down is working ok) but on snmp-server enable traps
bridge, when i generate a tcn i receive:
Subject: trap received from <UNKNOWN>: SNMPv2-SMI::mib-2.17.0.2
Host: <UNKNOWN> (UDP: [10.255.10.222]:64858)
DISMAN-EVENT-MIB::sysUpTimeInstance 0:3:55:38.13
SNMPv2-MIB::snmpTrapOID.0 SNMPv2-SMI::mib-2.17.0.2
SNMPv2-SMI::enterprises.9.9.82.1.11.4.1.1.1 1
IF-MIB::ifName.10132 Gi0/32
Host: <UNKNOWN> (UDP: [10.255.10.222]:64858)
DISMAN-EVENT-MIB::sysUpTimeInstance 0:3:55:38.14
SNMPv2-MIB::snmpTrapOID.0 SNMPv2-SMI::mib-2.17.0.2
SNMPv2-SMI::enterprises.9.9.82.1.11.4.1.1.0 0
IF-MIB::ifName.10132 Gi0/32
the test switch is 3560G and the i use snmptrapd from a fedora
thanks
Bogdan
|
