Mailing List Archive: MythTV: Users

Upgrading to CVS

Index | Next | Previous | View Threaded

jc at izorch

Nov 16, 2004, 3:01 PM

Post #1 of 8 (934 views)
Permalink

Upgrading to CVS

So i Installed mythtv via apt-get and then ran into the record bug so i
decided to install it via CVS. I followed the guide
http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo . Now when I run
mythtvsetup I get the following error:
mythtvsetup: error while loading shared libraries: mythsetup:
undefined symbol: _ZN11MythContextC1ERK7QStringbb
I never uninstalled mythtv-suite do I have too? If I do how?
What should I do?
--
Jonathan Chapman [jc[at]izorch.net]
http://iZorch.net
Tel 925-437-2743
Fax 925-484-1877

_______________________________________________
mythtv-users mailing list
mythtv-users[at]mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

jc at izorch

Nov 16, 2004, 3:14 PM

Post #2 of 8 (919 views)
Permalink

Re: Upgrading to CVS [In reply to]

I Guess I did do an unistall... since I followed that upgrade doc... idea?

Jonathan Chapman wrote:

> So i Installed mythtv via apt-get and then ran into the record bug so
> i decided to install it via CVS. I followed the guide
> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo . Now when I run
> mythtvsetup I get the following error:
> mythtvsetup: error while loading shared libraries: mythsetup:
> undefined symbol: _ZN11MythContextC1ERK7QStringbb
> I never uninstalled mythtv-suite do I have too? If I do how?
> What should I do?

--
Jonathan Chapman [jc[at]izorch.net]
http://iZorch.net
Tel 925-437-2743
Fax 925-484-1877

_______________________________________________
mythtv-users mailing list
mythtv-users[at]mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

potuncle at enjoyingeugene

Nov 16, 2004, 4:10 PM

Post #3 of 8 (934 views)
Permalink

Re: Upgrading to CVS [In reply to]

I was having the same problem.

Check out this thread:
http://www.gossamer-threads.com/lists/mythtv/users/93231

It's a long thread but check out message #5. There Jarod told me that the
problem was caused by some myth components left behind even after I did
apt-get uninstall mythtv. His solution worked for me.

Jason

> I Guess I did do an unistall... since I followed that upgrade doc... idea?
>
> Jonathan Chapman wrote:
>
>> So i Installed mythtv via apt-get and then ran into the record bug so
>> i decided to install it via CVS. I followed the guide
>> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo . Now when I run
>> mythtvsetup I get the following error:
>> mythtvsetup: error while loading shared libraries: mythsetup:
>> undefined symbol: _ZN11MythContextC1ERK7QStringbb
>> I never uninstalled mythtv-suite do I have too? If I do how?
>> What should I do?
>
>
> --
> Jonathan Chapman [jc[at]izorch.net]
> http://iZorch.net
> Tel 925-437-2743
> Fax 925-484-1877
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users[at]mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>

_______________________________________________
mythtv-users mailing list
mythtv-users[at]mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

jc at izorch

Nov 16, 2004, 4:30 PM

Post #4 of 8 (925 views)
Permalink

Re: Upgrading to CVS [In reply to]

I did run the rpm -e `rpm -qa | grep myth` and I did the MythTV step
again describe in http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
document but now I cant run mythtvsetup i get a missing mythtvsetup
command not found error. I did an updatedb and locate mythtvsetup and
theres nothing. What should I do now? So far i have done:
installed MythTV via apt-get
then followed-> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
got a undefined symbol error
ran the rpm -e `rpm -qa | grep myth` command
Redid the MythTV step @ http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo

I cant run the front end I get an error:
could not connect to LCDd: connection refused
loads up I click watch TV and I get an error Could not connect to the
master backend server.

How can I configure if I cant run mythtvsetup?

potuncle[at]enjoyingeugene.com wrote:

>I was having the same problem.
>
>Check out this thread:
>http://www.gossamer-threads.com/lists/mythtv/users/93231
>
>It's a long thread but check out message #5. There Jarod told me that the
>problem was caused by some myth components left behind even after I did
>apt-get uninstall mythtv. His solution worked for me.
>
>Jason
>
>
>
>
>>I Guess I did do an unistall... since I followed that upgrade doc... idea?
>>
>>Jonathan Chapman wrote:
>>
>>
>>
>>>So i Installed mythtv via apt-get and then ran into the record bug so
>>>i decided to install it via CVS. I followed the guide
>>>http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo . Now when I run
>>>mythtvsetup I get the following error:
>>> mythtvsetup: error while loading shared libraries: mythsetup:
>>>undefined symbol: _ZN11MythContextC1ERK7QStringbb
>>>I never uninstalled mythtv-suite do I have too? If I do how?
>>>What should I do?
>>>
>>>
>>--
>>Jonathan Chapman [jc[at]izorch.net]
>>http://iZorch.net
>>Tel 925-437-2743
>>Fax 925-484-1877
>>
>>_______________________________________________
>>mythtv-users mailing list
>>mythtv-users[at]mythtv.org
>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>>
>>
>
>
>
>
>
>

--
Jonathan Chapman [jc[at]izorch.net]
http://iZorch.net
Tel 925-437-2743
Fax 925-484-1877

_______________________________________________
mythtv-users mailing list
mythtv-users[at]mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

jc at izorch

Nov 16, 2004, 4:42 PM

Post #5 of 8 (910 views)
Permalink

Re: Upgrading to CVS [In reply to]

Mythbackend doesnt start on boot up even if i run the chkconfig function

Jonathan Chapman wrote:

> I did run the rpm -e `rpm -qa | grep myth` and I did the MythTV step
> again describe in http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
> document but now I cant run mythtvsetup i get a missing mythtvsetup
> command not found error. I did an updatedb and locate mythtvsetup and
> theres nothing. What should I do now? So far i have done:
> installed MythTV via apt-get
> then followed-> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
> got a undefined symbol error
> ran the rpm -e `rpm -qa | grep myth` command
> Redid the MythTV step @ http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
>
> I cant run the front end I get an error:
> could not connect to LCDd: connection refused
> loads up I click watch TV and I get an error Could not connect to the
> master backend server.
>
> How can I configure if I cant run mythtvsetup?
>
>
>
> potuncle[at]enjoyingeugene.com wrote:
>
>> I was having the same problem.
>>
>> Check out this thread:
>> http://www.gossamer-threads.com/lists/mythtv/users/93231
>>
>> It's a long thread but check out message #5. There Jarod told me that
>> the
>> problem was caused by some myth components left behind even after I did
>> apt-get uninstall mythtv. His solution worked for me.
>>
>> Jason
>>
>>
>>
>>
>>> I Guess I did do an unistall... since I followed that upgrade doc...
>>> idea?
>>>
>>> Jonathan Chapman wrote:
>>>
>>>
>>>
>>>> So i Installed mythtv via apt-get and then ran into the record bug so
>>>> i decided to install it via CVS. I followed the guide
>>>> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo . Now when I run
>>>> mythtvsetup I get the following error:
>>>> mythtvsetup: error while loading shared libraries: mythsetup:
>>>> undefined symbol: _ZN11MythContextC1ERK7QStringbb
>>>> I never uninstalled mythtv-suite do I have too? If I do how?
>>>> What should I do?
>>>>
>>>
>>> --
>>> Jonathan Chapman [jc[at]izorch.net]
>>> http://iZorch.net
>>> Tel 925-437-2743
>>> Fax 925-484-1877
>>>
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users[at]mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>

--
Jonathan Chapman [jc[at]izorch.net]
http://iZorch.net
Tel 925-437-2743
Fax 925-484-1877

_______________________________________________
mythtv-users mailing list
mythtv-users[at]mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

jcw at wilsonet

Nov 16, 2004, 6:17 PM

Post #6 of 8 (918 views)
Permalink

Re: Upgrading to CVS [In reply to]

On Tuesday 16 November 2004 16:10, potuncle[at]enjoyingeugene.com wrote:
> I was having the same problem.
>
> Check out this thread:
> http://www.gossamer-threads.com/lists/mythtv/users/93231
>
> It's a long thread but check out message #5. There Jarod told me that the
> problem was caused by some myth components left behind even after I did
> apt-get uninstall mythtv. His solution worked for me.

And the very first line of the UpgradeToCvsHowTo is functionally equivalent:

# rpm -q -a | grep myth | xargs "rpm -e"

Same result as:

# rpm -e `rpm -qa | grep myth`

Just putting these out there so list searches turn them up...

> > I Guess I did do an unistall... since I followed that upgrade doc...

Apparently, you didn't. :-)

> > Jonathan Chapman wrote:
> >> So i Installed mythtv via apt-get and then ran into the record bug so
> >> i decided to install it via CVS. I followed the guide
> >> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo . Now when I run
> >> mythtvsetup I get the following error:
> >> mythtvsetup: error while loading shared libraries: mythsetup:
> >> undefined symbol: _ZN11MythContextC1ERK7QStringbb
> >> I never uninstalled mythtv-suite do I have too? If I do how?
> >> What should I do?

--
Jarod C. Wilson, RHCE
jcw[at]wilsonet.com

Got a question? Read this first...
http://catb.org/~esr/faqs/smart-questions.html
MythTV, Fedora Core & ATrpms documentation:
http://wilsonet.com/mythtv/
MythTV Searchable Mailing List Archive
http://www.gossamer-threads.com/lists/mythtv/

jcw at wilsonet

Nov 16, 2004, 6:20 PM

Post #7 of 8 (924 views)
Permalink

Re: Upgrading to CVS [In reply to]

On Tuesday 16 November 2004 16:30, Jonathan Chapman wrote:
> I did run the rpm -e `rpm -qa | grep myth` and I did the MythTV step
> again describe in http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
> document but now I cant run mythtvsetup i get a missing mythtvsetup
> command not found error. I did an updatedb and locate mythtvsetup and
> theres nothing. What should I do now? So far i have done:
> installed MythTV via apt-get
> then followed-> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
> got a undefined symbol error
> ran the rpm -e `rpm -qa | grep myth` command
> Redid the MythTV step @ http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
>
> I cant run the front end I get an error:
> could not connect to LCDd: connection refused

Did you edit settings.pro and enable LCD stuff? If the frontend still runs,
you can safely ignore the error though. I thought the LCD bit was off by
default, but I may be mistaken.

> loads up I click watch TV and I get an error Could not connect to the
> master backend server.

Gotta start the backend.

> How can I configure if I cant run mythtvsetup?

mythtvsetup is the ATrpms name for the setup util when packaged in rpm form.
In its original form, it is path/to/source/mythtv/setup/setup, so run that
instead.

--
Jarod C. Wilson, RHCE
jcw[at]wilsonet.com

Got a question? Read this first...
http://catb.org/~esr/faqs/smart-questions.html
MythTV, Fedora Core & ATrpms documentation:
http://wilsonet.com/mythtv/
MythTV Searchable Mailing List Archive
http://www.gossamer-threads.com/lists/mythtv/

jcw at wilsonet

Nov 16, 2004, 6:26 PM

Post #8 of 8 (889 views)
Permalink

Re: Upgrading to CVS [In reply to]

On Tuesday 16 November 2004 16:42, Jonathan Chapman wrote:
> Mythbackend doesnt start on boot up even if i run the chkconfig function

Do you have an /etc/rc.d/init.d/mythbackend file? What happens when you try to
start it manually using the init script?

# /sbin/service mythbackend start

Also, did you modify settings.pro w/the HowTo's suggested PREFIX=/usr, or did
you leave it at the default /usr/local? Gotta make sure you set MBE_LOCATION
in /etc/sysconfig/mythbackend to match.

That's all I've got for the moment, time to head home for the day...

> Jonathan Chapman wrote:
> > I did run the rpm -e `rpm -qa | grep myth` and I did the MythTV step
> > again describe in http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
> > document but now I cant run mythtvsetup i get a missing mythtvsetup
> > command not found error. I did an updatedb and locate mythtvsetup and
> > theres nothing. What should I do now? So far i have done:
> > installed MythTV via apt-get
> > then followed-> http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
> > got a undefined symbol error
> > ran the rpm -e `rpm -qa | grep myth` command
> > Redid the MythTV step @ http://www.mythtv.info/moin.cgi/UpgradeToCvsHowTo
> >
> > I cant run the front end I get an error:
> > could not connect to LCDd: connection refused
> > loads up I click watch TV and I get an error Could not connect to the
> > master backend server.
> >
> > How can I configure if I cant run mythtvsetup?

--
Jarod C. Wilson, RHCE
jcw[at]wilsonet.com

Got a question? Read this first...
http://catb.org/~esr/faqs/smart-questions.html
MythTV, Fedora Core & ATrpms documentation:
http://wilsonet.com/mythtv/
MythTV Searchable Mailing List Archive
http://www.gossamer-threads.com/lists/mythtv/

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact lists@gossamer-threads.com