avalon at osguru
Jul 9, 2012, 10:36 AM
Post #1 of 1
(147 views)
Permalink
|
|
hauppauge dcr-2650 issues
|
|
I'm running mythbuntu 11.10 with the latest 0.25-fixes on a master backend with
3 dcr-2650 boxes plugged into it. Aside from the random jump file errors on the
frontends everything's been running fine for a while now.
This morning my wife went to watch live tv and it immediately went back to the
main menu. I checked the backend logs and see:
Jul 9 12:24:04 mythtv-backend mythbackend[7043]: I ProcessRequest
mainserver.cpp:1360 (HandleAnnounce) MainServer::ANN Playback
Jul 9 12:24:04 mythtv-backend mythbackend[7043]: I ProcessRequest
mainserver.cpp:1362 (HandleAnnounce) adding: schevalley-Latitude-D820 as a
client (events: 0)
Jul 9 12:24:04 mythtv-backend mythbackend[7043]: I TVRecEvent tv_rec.cpp:1029
(HandleStateChange) TVRec(7): Changing from None to WatchingLiveTV
Jul 9 12:24:04 mythtv-backend mythbackend[7043]: I TVRecEvent tv_rec.cpp:3495
(TuningCheckForHWChange) TVRec(7): HW Tuner: 7->7
Jul 9 12:24:04 mythtv-backend mythbackend[7043]: E TVRecEvent
hdhrstreamhandler.cpp:434 (TunerSet) HDHRSH(20103BD4-1): DeviceSet(vchannel
664): ERROR: invalid virtual channel
Jul 9 12:24:04 mythtv-backend mythbackend[7043]: E TVRecEvent tv_rec.cpp:3681
(TuningFrequency) TVRec(7): Failed to set channel to 664. Reverting to kState_None
Jul 9 12:24:04 mythtv-backend mythbackend[7043]: I TVRecEvent tv_rec.cpp:1029
(HandleStateChange) TVRec(7): Changing from WatchingLiveTV to None
I think the key is the "invalid virtual channel"
I checked using the hdhomerun_config_gui and I can tune channels there, but it's
not using the same virtual channel numbers. Calling up the tuner box web page
and looking at the logs there, I see:
20120708-02:31:28 CableCARD: Tuner1: vchannel 664 (597MHz-629) access = subscribed
20120708-14:18:03 CableCARD: Tuner1: vchannel 664 (597MHz-629) access = subscribed
20120708-17:02:21 CableCARD: Tuner1: vchannel 668 (393MHz-732) access = subscribed
20120708-23:36:22 CableCARD: Tuner1: vchannel 668 (393MHz-732) access = subscribed
20120708-23:36:35 CableCARD: Tuner1: vchannel 685 (135MHz-661) access = subscribed
20120709-13:34:51 CableCARD: Tuner1: vchannel 685 unknown (not found)
20120709-13:34:52 CableCARD: Tuner1: vchannel 685 unknown (not found)
20120709-13:34:53 CableCARD: Tuner1: vchannel 685 unknown (not found)
20120709-13:34:58 CableCARD: Tuner1: vchannel 685 unknown (not found)
20120709-13:35:02 CableCARD: Tuner1: vchannel 685 unknown (not found)
all the logs after 20120709-13:34 say the unknown line.
Last night it worked fine.
I ran mythfilldatabase to see if that had problems and it worked fine, but I
still can't tune a channel. I also went into the source config in mythtv-setup
and change the tuning mode from us-bcast to us-cable and also reselected that
source for all the tuners and had it download channel info from the source and
that didn't help either.
At this point I think I need to remove the schedules direct source and readd it
and then recreate all the tuners in the system.
Unless someone here has a better solution.
Thanks!
Scott
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users
|
