josu.lazkano at gmail
May 25, 2012, 11:35 AM
Post #5 of 5
(288 views)
Permalink
|
2012/5/25 Jim Morton <Jim [at] morton>
> On 5/25/2012 2:12 PM, Josu Lazkano wrote:
>
>> 2012/5/23 David Watkins <watkinshome [at] gmail <mailto:
>> watkinshome [at] gmail>**>
>>
>>
>> On 23 May 2012 15:10, Josu Lazkano <josu.lazkano [at] gmail
>> <mailto:josu.lazkano [at] gmail**>> wrote:
>> > Hello, I am trying to configure my system to record some tv
>> programs.
>> > I have schedule two recordings on same channel:
>> >
>> > 11:30 - 12:30: Alerta cobra
>> > 12:30 - 14:00: Las Maņanas
>> >
>> > I have configured this in General (Advanced) settings:
>> >
>> > Time to record before start of show (secs): 600
>> > Time to record past end of show (secs): 1800
>> >
>> > The program "Alerta cobra" must start to record at 11:20 and
>> finish at
>> > 13:00. The problem is that it stop to record at 12:30.
>> >
>> > The program "Las maņanas de cuatro" must start to record at
>> 12:20 and
>> > finish at 14:30. The problem is that it start at 12:30.
>> >
>> > I have 2 capture cards and have enable 2 simultaneous recording
>> on each card.
>> >
>> > How could I configure it?
>>
>> Edit the recording rule for each of the programmes. You can do this
>> by looking at 'Upcoming Recordings' and selecting the appropriate
>> recording.
>>
>> Under Scheduling Options set:
>>
>> Start Recording 10 minutes early.
>> End Recording 30 minutes late.
>>
>>
>> I would remove these settings
>>
>> > Time to record before start of show (secs): 600
>> > Time to record past end of show (secs): 1800
>>
>> Search the list for 'soft vs hard padding' to see the effect of these,
>> but they don't help with scheduling back-to-back recordings.
>>
>> You can create default Start Early, End Late values for new recording
>> rules in the frontend setup, (under 'Set Recording Priorities' I
>> think), but they won't get applied to existing rules.
>> ______________________________**_________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv <mailto:mythtv-users [at] mythtv**org<mythtv-users [at] mythtv>
>> >
>>
>> http://www.mythtv.org/mailman/**listinfo/mythtv-users<http://www.mythtv.org/mailman/listinfo/mythtv-users>
>>
>>
>>
>> Thanks for the reply, I think that the problem is that all recordings are
>> recorded by same card: cardid 15, sourceid 1
>>
>> On 0.24 I have same configuration and it works great, the first program
>> was recorded with a card and the second recordings is recorded by other
>> card number (same tuner).
>>
>> Is possible to configure this?
>>
>> Thanks and best regards.
>>
>>
>>
> Look for "Avoid back to back recordings" option and check it. Unless it
> has gone away for .025.
>
> --
> ______________________________**___________________________
>
> Jim Morton
>
>
>
Thanks!
I put it on "Always" on "Set Recording Priorities". I will test it this
weekend.
Best regards.
--
Josu Lazkano
|
mythbackend.20120520141648.4081.log
