w.f.mythbuster at gmail
May 9, 2012, 12:35 PM
Post #4 of 4
(418 views)
Permalink
|
Op 8-5-2012 22:48, Joseph Fry schreef:
>
> Hello
>
> Is am using the following dvb-s2 card.
> http://www.tbsdtv.com/products/tbs6928-dvb-s2-tv-tuner-ci-pcie-card.html\
> <http://www.tbsdtv.com/products/tbs6928-dvb-s2-tv-tuner-ci-pcie-card.html%5C>
>
> In combination with the following cam.
> http://www.aston-france.com/modules/
> this is the mediaguard compatible cam
>
> If I use this combination with dvblast it works absolute flawless
> on the Dutch Pat TV channels (canal digitaal netherlands.)
>
> But if I use this hardware with MythTV I see that the picture is
> freezing very often.
>
> after checking dmesg is lots of these below.
>
> [ 16.972735] tbsci: TBS Adapter 0 CI enabled
> [ 16.972740] dvb_ca adapter 0: DVB CAM detected and initialised
> successfully
> [ 19.592102] tbsci: TBS Adapter 0 CI disabled
> [ 20.827764] tbsci: TBS Adapter 0 CI enabled
> [ 20.827767] dvb_ca adapter 0: DVB CAM detected and initialised
> successfully
> [ 22.687304] eth0: no IPv6 routers present
> [ 65.996574] tbsci: TBS Adapter 0 CI disabled
> [ 67.232267] tbsci: TBS Adapter 0 CI enabled
> [ 67.232271] dvb_ca adapter 0: DVB CAM detected and initialised
> successfully
> [ 309.884406] tbsci: TBS Adapter 0 CI disabled
> [ 311.119931] tbsci: TBS Adapter 0 CI enabled
> [ 311.119938] dvb_ca adapter 0: DVB CAM detected and initialised
> successfully
>
> So the cam is reinitialised very often when using mythtv.
>
> This is tested with MythTV 0.24 fixes (mythbuntu 11.10) and MythTV
> 0.25 fixes (mythbuntu 12.04)
>
> Is mythTV accessing the CAM in a different way than dvblast?
>
> Thanks Wim
>
>
> This is just a very wild guess... but is EIT enabled?
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
Hello
I tested with EIT disabled but there is no defference.
Any other suggestions anybody?
Wim
|
