Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: MythTV: Users

How-to AirPlay question

  

 
First page Previous page 1 2 3 Next page Last page  View All MythTV users RSS feed   Index | Next | Previous | View Threaded


ashu.desai at gmail

Apr 17, 2012, 2:09 PM

Post #1 of 52 (1712 views)
Permalink
How-to AirPlay question
Hello all,
I have followed instructions per

http://www.mythtv.org/wiki/AirTunes/AirPlay

How do I actually use this? Say if I have a video under iPhone/iPad, how
would I have it to play on Myth; now that I have followed the steps?

BTW, I did *not* get the "Failed to read the RAOP" part, but I still went
ahead and did all the steps.

Thanks,

Ash


http://about.me/adesai


mythtv at hambone

Apr 17, 2012, 2:19 PM

Post #2 of 52 (1690 views)
Permalink
Re: How-to AirPlay question [In reply to]
On Tue, Apr 17, 2012 at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:

> Hello all,
> I have followed instructions per
>
> http://www.mythtv.org/wiki/AirTunes/AirPlay
>
> How do I actually use this? Say if I have a video under iPhone/iPad, how
> would I have it to play on Myth; now that I have followed the steps?
>
>
Basically, you play the video on your iOS device, then change the output.
There is a little box on your iOS device screen with an arrow on the lower
right (I believe). Select that box and find the mythtv output and that's
it -- it plays on your mythtv frontend.

That being said, I have not attempted this yet. I've just done this with
my AppleTV 2 and my XBMC box.

Good luck!
Jerry


jon at whitear

Apr 17, 2012, 5:19 PM

Post #3 of 52 (1677 views)
Permalink
Re: How-to AirPlay question [In reply to]
> On Tue, Apr 17, 2012 at 5:09 PM, A Desai < ashu.desai [at] gmail >
> wrote:

> > Hello all,
>
> > I have followed instructions per
>

> > http://www.mythtv.org/wiki/AirTunes/AirPlay
>

> > How do I actually use this? Say if I have a video under
> > iPhone/iPad,
> > how would I have it to play on Myth; now that I have followed the
> > steps?
>

> Basically, you play the video on your iOS device, then change the
> output. There is a little box on your iOS device screen with an
> arrow on the lower right (I believe). Select that box and find the
> mythtv output and that's it -- it plays on your mythtv frontend.

> That being said, I have not attempted this yet. I've just done this
> with my AppleTV 2 and my XBMC box.

> Good luck!
> Jerry

That's right. I set up airplay last night and it works a treat. Just start playing the content on your IOS device (e.g. video, music, you tube etc) and an extra control (the box with the arrow) pops up on the IOS device next to the play/pause controls to direct the output to your frontend. I tried it playing music and videos from my iphone and ipad2 and it was flawless. the volume can be controlled from the IOS device, and you can seek through video using your TV remote. It's very cool.

This article explains:

http://support.apple.com/kb/HT4437

Cheers,

Jon

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


jason at mcleods

Apr 17, 2012, 5:47 PM

Post #4 of 52 (1678 views)
Permalink
Re: How-to AirPlay question [In reply to]
I followed the instructions too and I can see the device listed on my iPhone as a target. But I just get Errors in my fronted log "no session id in http request"

Are there packages that are required to support this feature, that I may be missing?

- Jason

On 2012-04-17, at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:

> Hello all,
> I have followed instructions per
>
> http://www.mythtv.org/wiki/AirTunes/AirPlay
>
> How do I actually use this? Say if I have a video under iPhone/iPad, how would I have it to play on Myth; now that I have followed the steps?
>
> BTW, I did *not* get the "Failed to read the RAOP" part, but I still went ahead and did all the steps.
>
> Thanks,
>
> Ash
>
>
> http://about.me/adesai
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
Attachments: smime.p7s (2.52 KB)


ashu.desai at gmail

Apr 17, 2012, 6:17 PM

Post #5 of 52 (1681 views)
Permalink
Re: How-to AirPlay question [In reply to]
I do *not* see any airplay icon - and it seems that is the case because
there is no air-play options.

To re-iterate, right from the beginning, I never got the message "No RAOP
found". I still went ahead on my Frontend and created RAOP.rsa where I
pasted the key.

Anything I can check (services, etc) to confirm if my side is installed ok?

Regards,
Ash


On Tue, Apr 17, 2012 at 7:47 PM, Jason McLeod <jason [at] mcleods> wrote:

> I followed the instructions too and I can see the device listed on my
> iPhone as a target. But I just get Errors in my fronted log "no session id
> in http request"
>
> Are there packages that are required to support this feature, that I may
> be missing?
>
> - Jason
>
> On 2012-04-17, at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:
>
> Hello all,
> I have followed instructions per
>
> http://www.mythtv.org/wiki/AirTunes/AirPlay
>
> How do I actually use this? Say if I have a video under iPhone/iPad, how
> would I have it to play on Myth; now that I have followed the steps?
>
> BTW, I did *not* get the "Failed to read the RAOP" part, but I still went
> ahead and did all the steps.
>
> Thanks,
>
> Ash
>
>
> http://about.me/adesai
>
> _______________________________________________
>
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>


--
http://about.me/adesai


ashu.desai at gmail

Apr 17, 2012, 6:29 PM

Post #6 of 52 (1681 views)
Permalink
Re: How-to AirPlay question [In reply to]
This is what I see when I turn on my Frontend:

(On a separate note, it somehow takes OpenGL as the default painter, so I
have to force it to use QT via CLI)

--------------------------------------------

[root [at] F ~]# export MYTHTV_AIRPLAY="1"

[root [at] F ~]# mythfrontend -O ThemePainter=qt
2012-04-17 20:18:21.014775 C mythfrontend version: fixes/0.25
[v0.25-17-g682e6f5] www.mythtv.org
2012-04-17 20:18:21.014908 N Enabled verbose msgs: general
2012-04-17 20:18:21.015041 N Setting Log Level to LOG_INFO
2012-04-17 20:18:21.015279 I Added logging to the console
2012-04-17 20:18:21.015310 I Added database logging to table logging
2012-04-17 20:18:21.015623 N Setting up SIGHUP handler
2012-04-17 20:18:21.016069 N Using runtime prefix = /usr
2012-04-17 20:18:21.016254 N Using configuration directory = /root/.mythtv
2012-04-17 20:18:21.016955 I Assumed character encoding: en_US.UTF-8
2012-04-17 20:18:21.019891 N Empty LocalHostName.
2012-04-17 20:18:21.019946 I Using localhost value of FE.local
2012-04-17 20:18:21.118611 N Setting QT default locale to en_US
2012-04-17 20:18:21.118705 I Current locale en_US
2012-04-17 20:18:21.118888 N Reading locale defaults from
/usr/share/mythtv//locales/en_us.xml
2012-04-17 20:18:21.147389 I Starting process manager
2012-04-17 20:18:21.147717 I Starting IO manager (write)
2012-04-17 20:18:21.151044 I Starting IO manager (read)
2012-04-17 20:18:21.151571 I Starting process signal handler
2012-04-17 20:18:22.273484 I ScreenSaverX11Private: DPMS is not supported.
Xlib: extension "XFree86-VidModeExtension" missing on display
"localhost:10.0".
2012-04-17 20:18:24.324849 E X11 ModeLine query failed
2012-04-17 20:18:24.326124 N Desktop video mode: 1920x1080 60.000 Hz
2012-04-17 20:18:26.377893 N Setting 'ThemePainter' being forced to 'qt'
2012-04-17 20:18:26.387608 I Listening on TCP 127.0.0.1:6547
2012-04-17 20:18:26.387960 I Listening on TCP x.x.x.x:6547
2012-04-17 20:18:26.390751 I Listening on TCP [0:0:0:0:0:0:0:1]:6547
2012-04-17 20:18:27.436949 I AirPay: Created airplay objects.
2012-04-17 20:18:27.437893 I Listening on TCP 127.0.0.1:5100
2012-04-17 20:18:27.438231 I Listening on TCP x.x.x.x:5100
2012-04-17 20:18:27.441945 I Listening on TCP [0:0:0:0:0:0:0:1]:5100
2012-04-17 20:18:27.442072 I AirPay: Listening for connections on port 5100
2012-04-17 20:18:27.446449 I Loading en_us translation for module
mythfrontend
2012-04-17 20:18:28.356272 I Bonjour: Service registration complete: name
'MythTV on FE.local' type '_airplay._tcp.' domain: 'local.'
2012-04-17 20:18:28.497493 E LIRC: Failed to connect to Unix socket
'/var/run/lirc/lircd'
eno: No such file or directory (2)
2012-04-17 20:18:28.497681 E JoystickMenuThread: Joystick disabled -
Failed to read /root/.mythtv/joystickmenurc
2012-04-17 20:18:28.499675 I Binding to UDP 127.0.0.1:6948
2012-04-17 20:18:28.499856 I Binding to UDP x.x.x.x:6948
2012-04-17 20:18:28.502423 I Binding to UDP [0:0:0:0:0:0:0:1]:6948
2012-04-17 20:18:28.502657 I Binding to UDP x.x.x.255:6948
2012-04-17 20:18:28.577067 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 20:18:28.595947 I Using Frameless Window
2012-04-17 20:18:28.596130 I Using Full Screen Window
2012-04-17 20:18:31.281265 I Using the Qt painter
2012-04-17 20:18:31.462392 E MythFontProperties: Failed to load 'Arial',
got 'DejaVu Sans' instead
Location: /root/.mythtv/themes/Willi/base.xml @ 33
Name: 'videocodec' Type: 'fontdef'
2012-04-17 20:18:31.705575 E XMLParseBase: Unknown widget type.
Location: /root/.mythtv/themes/Willi/base.xml @ 647
Name: '' Type: 'layout'
2012-04-17 20:18:32.001817 E MythUIHelper:
LoadScaleImage(icons/file-saveas.png)Unable to find image file
2012-04-17 20:18:32.369211 E XMLParseBase: Unable to load window
'backgroundwindow' from base
2012-04-17 20:18:32.394038 I Current MythTV Schema Version (DBSchemaVer):
1299
2012-04-17 20:18:34.050346 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 20:18:34.272358 N Registering Internal as a media playback
plugin.
2012-04-17 20:18:34.401906 I Loading en_us translation for module
mytharchive
2012-04-17 20:18:34.416135 N Registering WebBrowser as a media playback
plugin.
2012-04-17 20:18:34.416347 I Loading en_us translation for module
mythbrowser
2012-04-17 20:18:34.467806 I Loading en_us translation for module
mythgallery
2012-04-17 20:18:34.483434 I Loading en_us translation for module mythgame
2012-04-17 20:18:34.516344 I Current MythMusic Schema Version
(MusicDBSchemaVer): 1019
2012-04-17 20:18:34.557732 I Loading en_us translation for module mythmusic
2012-04-17 20:18:34.567025 I Loading en_us translation for module
mythnetvision
2012-04-17 20:18:34.579603 I Loading en_us translation for module mythnews
2012-04-17 20:18:34.595104 I Loading en_us translation for module
mythweather
2012-04-17 20:18:34.628205 N Found mainmenu.xml for theme 'Willi'
2012-04-17 20:18:34.707381 I MythCoreContext: Connecting to backend
server: x.x.x.x:6543 (try 1 of 1)
2012-04-17 20:18:34.709590 I Using protocol version 72
2012-04-17 20:18:41.127057 I Bonjour: Service registration complete: name
'Mythfrontend on FE.local' type '_mythfrontend._tcp.' domain: 'local.'
2012-04-17 20:22:44.540513 I Received remote 'Clear Cache' request

------------------------------------------------------------------------------------------------


No AirPlay as it stands...


Ash



On Tue, Apr 17, 2012 at 8:17 PM, A Desai <ashu.desai [at] gmail> wrote:

> I do *not* see any airplay icon - and it seems that is the case because
> there is no air-play options.
>
> To re-iterate, right from the beginning, I never got the message "No RAOP
> found". I still went ahead on my Frontend and created RAOP.rsa where I
> pasted the key.
>
> Anything I can check (services, etc) to confirm if my side is installed ok?
>
> Regards,
> Ash
>
>
> On Tue, Apr 17, 2012 at 7:47 PM, Jason McLeod <jason [at] mcleods> wrote:
>
>> I followed the instructions too and I can see the device listed on my
>> iPhone as a target. But I just get Errors in my fronted log "no session id
>> in http request"
>>
>> Are there packages that are required to support this feature, that I may
>> be missing?
>>
>> - Jason
>>
>> On 2012-04-17, at 5:09 PM, A Desai <ashu.desai [at] gmail> wrote:
>>
>> Hello all,
>> I have followed instructions per
>>
>> http://www.mythtv.org/wiki/AirTunes/AirPlay
>>
>> How do I actually use this? Say if I have a video under iPhone/iPad, how
>> would I have it to play on Myth; now that I have followed the steps?
>>
>> BTW, I did *not* get the "Failed to read the RAOP" part, but I still went
>> ahead and did all the steps.
>>
>> Thanks,
>>
>> Ash
>>
>>
>> http://about.me/adesai
>>
>> _______________________________________________
>>
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>>
>
>
> --
> http://about.me/adesai
>



--
http://about.me/adesai


jyavenard at gmail

Apr 17, 2012, 7:17 PM

Post #7 of 52 (1670 views)
Permalink
Re: How-to AirPlay question [In reply to]
On 18 April 2012 11:29, A Desai <ashu.desai [at] gmail> wrote:
> This is what I see when I turn on my Frontend:
>
> (On a separate note, it somehow takes OpenGL as the default painter, so I
> have to force it to use QT via CLI)
>
> --------------------------------------------
>
> [root [at] F ~]# export MYTHTV_AIRPLAY="1"
>
> [root [at] F ~]# mythfrontend -O ThemePainter=qt
> 2012-04-17 20:18:21.014775 C  mythfrontend version: fixes/0.25
> [v0.25-17-g682e6f5] www.mythtv.org

Where did you get your mythfrontend from, did you compile it yourself?

You need to build with openssl dev installed
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


ashu.desai at gmail

Apr 17, 2012, 7:35 PM

Post #8 of 52 (1677 views)
Permalink
Re: How-to AirPlay question [In reply to]
Yes, I compiled it - got it from http://code.mythtv.org/trac

I am no linux guru - I barely make it. I had openssl installed, i now have
devel also installed.

[root [at] F ~]# rpm -qa | grep openssl
openssl-1.0.0-20.el6_2.3.i686
openssl-devel-1.0.0-20.el6_2.3.i686

I restarted avahi-daemon service, AirPlay didn't work. So I restarted the
Frontend. I still do not see the RAOP message anywhere. This is what I see
- no AirPlay.

----------------------------------

[root [at] F ~]# export MYTHTV_AIRPLAY="1"

[root [at] F ~]# mythfrontend -O themepainter=qt
2012-04-17 21:30:43.457331 C mythfrontend version: fixes/0.25
[v0.25-17-g682e6f5] www.mythtv.org
2012-04-17 21:30:43.457461 N Enabled verbose msgs: general
2012-04-17 21:30:43.457600 N Setting Log Level to LOG_INFO
2012-04-17 21:30:43.457857 I Added logging to the console
2012-04-17 21:30:43.457888 I Added database logging to table logging
2012-04-17 21:30:43.458213 N Setting up SIGHUP handler
2012-04-17 21:30:43.458731 N Using runtime prefix = /usr
2012-04-17 21:30:43.458841 N Using configuration directory = /root/.mythtv
2012-04-17 21:30:43.459528 I Assumed character encoding: en_US.UTF-8
2012-04-17 21:30:43.463888 N Empty LocalHostName.
2012-04-17 21:30:43.463945 I Using localhost value of FE.local
2012-04-17 21:30:43.610776 N Setting QT default locale to en_US
2012-04-17 21:30:43.610857 I Current locale en_US
2012-04-17 21:30:43.613713 N Reading locale defaults from
/usr/share/mythtv//locales/en_us.xml
2012-04-17 21:30:43.634518 I Starting process manager
2012-04-17 21:30:43.634886 I Starting process signal handler
2012-04-17 21:30:43.635153 I Starting IO manager (read)
2012-04-17 21:30:43.638253 I Starting IO manager (write)
2012-04-17 21:30:44.754367 I ScreenSaverX11Private: DPMS is not supported.
Xlib: extension "XFree86-VidModeExtension" missing on display
"localhost:10.0".
2012-04-17 21:30:46.796368 E X11 ModeLine query failed
2012-04-17 21:30:46.798441 N Desktop video mode: 1920x1080 60.000 Hz
2012-04-17 21:30:48.847045 N Setting 'themepainter' being forced to 'qt'
2012-04-17 21:30:48.872068 I Listening on TCP 127.0.0.1:6547
2012-04-17 21:30:48.873342 I Listening on TCP x.x.x..56:6547
2012-04-17 21:30:48.876096 I Listening on TCP [0:0:0:0:0:0:0:1]:6547
2012-04-17 21:30:49.880823 I AirPay: Created airplay objects.
2012-04-17 21:30:49.881781 I Listening on TCP 127.0.0.1:5100
2012-04-17 21:30:49.882048 I Listening on TCP x.x.x..56:5100
2012-04-17 21:30:49.885598 I Listening on TCP [0:0:0:0:0:0:0:1]:5100
2012-04-17 21:30:49.885719 I AirPay: Listening for connections on port 5100
2012-04-17 21:30:49.896914 I Loading en_us translation for module
mythfrontend
2012-04-17 21:30:50.804337 I Bonjour: Service registration complete: name
'MythTV on FE.local' type '_airplay._tcp.' domain: 'local.'
2012-04-17 21:30:50.935043 E LIRC: Failed to connect to Unix socket
'/var/run/lirc/lircd'
eno: No such file or directory (2)
2012-04-17 21:30:50.935213 E JoystickMenuThread: Joystick disabled -
Failed to read /root/.mythtv/joystickmenurc
2012-04-17 21:30:50.937050 I Binding to UDP 127.0.0.1:6948
2012-04-17 21:30:50.937216 I Binding to UDP x.x.x..56:6948
2012-04-17 21:30:50.939809 I Binding to UDP [0:0:0:0:0:0:0:1]:6948
2012-04-17 21:30:50.940018 I Binding to UDP x.x.x..255:6948
2012-04-17 21:30:51.011801 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 21:30:51.027604 I Using Frameless Window
2012-04-17 21:30:51.027795 I Using Full Screen Window
2012-04-17 21:30:53.692805 I Using the Qt painter
2012-04-17 21:30:53.903780 E MythFontProperties: Failed to load 'Arial',
got 'DejaVu Sans' instead
Location: /root/.mythtv/themes/Willi/base.xml @ 33
Name: 'videocodec' Type: 'fontdef'
2012-04-17 21:30:54.147782 E XMLParseBase: Unknown widget type.
Location: /root/.mythtv/themes/Willi/base.xml @ 647
Name: '' Type: 'layout'
2012-04-17 21:30:54.400964 E MythUIHelper:
LoadScaleImage(icons/file-saveas.png)Unable to find image file
2012-04-17 21:30:54.754770 E XMLParseBase: Unable to load window
'backgroundwindow' from base
2012-04-17 21:30:54.785615 I Current MythTV Schema Version (DBSchemaVer):
1299
2012-04-17 21:30:56.558838 W Key Esc is bound to multiple actions in
context Main Menu.
2012-04-17 21:30:56.770718 N Registering Internal as a media playback
plugin.
2012-04-17 21:30:57.158723 A MMUnix:CheckMountable: DBus interface error:
2012-04-17 21:30:57.766066 I Loading en_us translation for module
mytharchive
2012-04-17 21:30:57.781389 N Registering WebBrowser as a media playback
plugin.
2012-04-17 21:30:57.781926 I Loading en_us translation for module
mythbrowser
2012-04-17 21:30:57.834685 I Loading en_us translation for module
mythgallery
2012-04-17 21:30:57.854331 I Loading en_us translation for module mythgame
2012-04-17 21:30:57.911140 I Current MythMusic Schema Version
(MusicDBSchemaVer): 1019
2012-04-17 21:30:57.950451 I Loading en_us translation for module mythmusic
2012-04-17 21:30:57.963681 I Loading en_us translation for module
mythnetvision
2012-04-17 21:30:57.979170 I Loading en_us translation for module mythnews
2012-04-17 21:30:57.997749 I Loading en_us translation for module
mythweather
2012-04-17 21:30:58.032048 N Found mainmenu.xml for theme 'Willi'
2012-04-17 21:30:58.117823 I MythCoreContext: Connecting to backend
server: x.x.x..x:6543 (try 1 of 1)
2012-04-17 21:30:58.120088 I Using protocol version 72
2012-04-17 21:31:04.676673 I Bonjour: Service registration complete: name
'Mythfrontend on FE.local' type '_mythfrontend._tcp.' domain: 'local.'
2012-04-17 21:32:10.040341 N Resuming idle timer
2012-04-17 21:32:10.045061 N Resuming idle timer
2012-04-17 21:32:10.051363 I Bonjour: De-registering service
'_mythfrontend._tcp.' on 'Mythfrontend on FE.local'
2012-04-17 21:32:10.052111 I AirPay: Cleaning up.
2012-04-17 21:32:10.052298 I Bonjour: De-registering service
'_airplay._tcp.' on 'MythTV on FE.local'
2012-04-17 21:32:10.055843 I Deleting UPnP client...
2012-04-17 21:32:10.607894 I Waiting for threads to exit.
[root [at] F ~]#
----------------------------------------------------------



On Tue, Apr 17, 2012 at 9:17 PM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 11:29, A Desai <ashu.desai [at] gmail> wrote:
> > This is what I see when I turn on my Frontend:
> >
> > (On a separate note, it somehow takes OpenGL as the default painter, so I
> > have to force it to use QT via CLI)
> >
> > --------------------------------------------
> >
> > [root [at] F ~]# export MYTHTV_AIRPLAY="1"
> >
> > [root [at] F ~]# mythfrontend -O ThemePainter=qt
> > 2012-04-17 20:18:21.014775 C mythfrontend version: fixes/0.25
> > [v0.25-17-g682e6f5] www.mythtv.org
>
> Where did you get your mythfrontend from, did you compile it yourself?
>
> You need to build with openssl dev installed
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>



--
http://about.me/adesai


jyavenard at gmail

Apr 17, 2012, 8:00 PM

Post #9 of 52 (1674 views)
Permalink
Re: How-to AirPlay question [In reply to]
On 18 April 2012 12:35, A Desai <ashu.desai [at] gmail> wrote:
> Yes, I compiled it - got it from  http://code.mythtv.org/trac
>
> I am no linux guru - I barely make it. I had openssl installed, i now have
> devel also installed.

It's obviously not compiled with RAOP...

the output of configure would help troubleshooting your problem
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


ashu.desai at gmail

Apr 17, 2012, 8:02 PM

Post #10 of 52 (1673 views)
Permalink
Re: How-to AirPlay question [In reply to]
So should I "recompile" the whole thing?

Just to be on same page -- go to mythplugins (under mythtv), do a
distclean, do a ./configure --prefix=/usr and then make, make install.

Is this what I am supposed to do?

Regards,
Ash


On Tue, Apr 17, 2012 at 10:00 PM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 12:35, A Desai <ashu.desai [at] gmail> wrote:
> > Yes, I compiled it - got it from http://code.mythtv.org/trac
> >
> > I am no linux guru - I barely make it. I had openssl installed, i now
> have
> > devel also installed.
>
> It's obviously not compiled with RAOP...
>
> the output of configure would help troubleshooting your problem
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>



--
http://about.me/adesai


jyavenard at gmail

Apr 17, 2012, 8:22 PM

Post #11 of 52 (1668 views)
Permalink
Re: How-to AirPlay question [In reply to]
On 18 April 2012 13:02, A Desai <ashu.desai [at] gmail> wrote:
> So should I "recompile" the whole thing?
>
> Just to be on same page -- go to mythplugins (under mythtv), do a distclean,
> do a ./configure --prefix=/usr and then make, make install.

I just want to see the output of your configure command.
I'm not asking you to recompile yet (though you will have to)
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


jk90090 at gmail

Apr 17, 2012, 8:22 PM

Post #12 of 52 (1663 views)
Permalink
Re: How-to AirPlay question [In reply to]
On 4/17/12 8:02 PM, A Desai wrote:
> So should I "recompile" the whole thing?
>
> Just to be on same page -- go to mythplugins (under mythtv), do a
> distclean, do a ./configure --prefix=/usr and then make, make install.
>
> Is this what I am supposed to do?
>
> Regards,
> Ash
>
Yes, recompile after you've installed the openssl dev package.

-JK
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


ashu.desai at gmail

Apr 17, 2012, 9:43 PM

Post #13 of 52 (1665 views)
Permalink
Re: How-to AirPlay question [In reply to]
how do I get output of the configure command? Do you mean the list of
plugins it says it installed? If so, here it is:

[root [at] F mythplugins]# ./configure --prefix=/usr
Disabling MythZoneMinder. Requires mysql/mysql.h header

Configuration settings:

qmake /usr/lib/qt47/bin/qmake

MythArchive plugin will be built
MythBrowser plugin will be built
MythGallery plugin will be built
MythGame plugin will be built
MythMusic plugin will be built
MythNetvision plugin will be built
MythNews plugin will be built
MythWeather plugin will be built
MythZoneMinder plugin will not be built
OpenGL support will be included in MythGallery
EXIF support will be included in MythGallery
Dcraw support will be included in MythGallery
libcdio support will be included in MythMusic
FFTW support will not be included in MythMusic


I have done a "make distclean" and then a "./configure --prefix=/usr" and
"make/make install" again. Still same thing. I do not see a RAOP message of
any kind...


Ash



On Tue, Apr 17, 2012 at 10:22 PM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 13:02, A Desai <ashu.desai [at] gmail> wrote:
> > So should I "recompile" the whole thing?
> >
> > Just to be on same page -- go to mythplugins (under mythtv), do a
> distclean,
> > do a ./configure --prefix=/usr and then make, make install.
>
> I just want to see the output of your configure command.
> I'm not asking you to recompile yet (though you will have to)
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>



--
http://about.me/adesai


jyavenard at gmail

Apr 17, 2012, 10:01 PM

Post #14 of 52 (1668 views)
Permalink
Re: How-to AirPlay question [In reply to]
On 18 April 2012 14:43, A Desai <ashu.desai [at] gmail> wrote:
> how do I get output of the configure command? Do you mean the list of
> plugins it says it installed? If so, here it is:
>
> [root [at] F mythplugins]# ./configure --prefix=/usr
> Disabling MythZoneMinder. Requires mysql/mysql.h header

sigh..

not the configure of the plugins of course!
the main mythtv configure!
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


ashu.desai at gmail

Apr 18, 2012, 6:07 AM

Post #15 of 52 (1648 views)
Permalink
Re: How-to AirPlay question [In reply to]
That's why I mentioned - I need to be told - I am no linux champ here;
barely making it.

Nevertheless, here it is -- from "mythtv"

---------------------------------

[root [at] F mythtv]# !857
./configure --prefix=/usr --enable-dvb --enable-proc-opt --enable-vdpau
--enable
-vaapi
--enable-libmp3lame --enable-libx264 --enable-libvpx --enable-libxvid --e

nable-libass
Unknown option "--enable-libass".
See ./configure --help for available options.
[root [at] F mythtv]# ./configure --prefix=/usr --enable-dvb --enable-proc-opt
--ena
ble-vdpau
--enable-vaapi --enable-libmp3lame --enable-libx264 --enable-libvpx --

enable-libxvid
# Basic Settings
Compile type profile
Compiler cache symlink gcc
DistCC no
qmake /usr/lib/qt47/bin/qmake
install prefix /usr
runtime prefix /usr
CPU x86 x86_32 (model name : Intel(R) Atom(TM)
CPU
230 @ 1.60GHz)
yasm yes
MMX enabled yes
MMX2 enabled yes
3DNow! enabled yes
3DNow! extended enabled yes
SSE enabled yes
SSSE3 enabled yes
CMOV enabled yes

# Input Support
Joystick menu yes
lirc support yes
libCEC device support no [/usr/include]
Video4Linux sup. yes (v1 yes)
ivtv support yes
HD-PVR support yes
FireWire support no
DVB support yes [/usr/include]
DVB-S2 support yes
HDHomeRun support yes
Ceton support yes
IPTV support yes
ASI support no

# Sound Output Support
PulseAudio support no
OSS support yes
ALSA support yes
JACK support no
libfftw3 support no

# Video Output Support
x11 support yes
xrandr support yes
xv support yes
VDPAU support yes
VAAPI support yes
CrystalHD support no
OpenGL video yes
MHEG support yes
libass subtitle support no

# Misc Features
multi threaded libavcodec yes
libxml2 support yes [/usr/include/libxml2]
libdns_sd (Bonjour) yes
libcrypto yes
Frontend yes
Backend yes
OpenGL ES 2.0 no

# Bindings
bindings_perl yes
bindings_python yes
bindings_php yes

# External Codec Options
mp3lame yes
faac no
xvid yes
x264 yes
vpx yes

Creating libs/libmythbase/mythconfig.h and libs/libmythbase/mythconfig.mak
--------------------------------------------------------

Let me know if this is still not it.

Ash



On Wed, Apr 18, 2012 at 12:01 AM, Jean-Yves Avenard <jyavenard [at] gmail>wrote:

> On 18 April 2012 14:43, A Desai <ashu.desai [at] gmail> wrote:
> > how do I get output of the configure command? Do you mean the list of
> > plugins it says it installed? If so, here it is:
> >
> > [root [at] F mythplugins]# ./configure --prefix=/usr
> > Disabling MythZoneMinder. Requires mysql/mysql.h header
>
> sigh..
>
> not the configure of the plugins of course!
> the main mythtv configure!
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>



--
http://about.me/adesai


jyavenard at gmail

Apr 18, 2012, 6:28 AM

Post #16 of 52 (1650 views)
Permalink
Re: How-to AirPlay question [In reply to]
On 18 April 2012 23:07, A Desai <ashu.desai [at] gmail> wrote:
> That's why I mentioned - I need to be told - I am no linux champ here;
> barely making it.
>
> Nevertheless, here it is -- from "mythtv"
>
> ---------------------------------
>
> [root [at] F mythtv]# !857
> ./configure --prefix=/usr --enable-dvb --enable-proc-opt --enable-vdpau
> --enable
>                                                            -vaapi
> --enable-libmp3lame --enable-libx264 --enable-libvpx --enable-libxvid --e
>
>                                                  nable-libass
> Unknown option "--enable-libass".
> See ./configure --help for available options.

you do not have to use the --enable-vdpau, --enable-libass etc.. they
will be autodetected


> multi threaded libavcodec yes
> libxml2 support           yes [/usr/include/libxml2]
> libdns_sd (Bonjour)       yes
> libcrypto                 yes
> Frontend                  yes
> Backend                   yes
> OpenGL ES 2.0             no

Well, everything you need for RAOP is there...

I think you will save yourself a great deal of trouble if you simply
used a packaged version of mythtv. There are binary distributions (or
source for things like gentoo) for virtually of distributions out
there.

JY
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


mythtv-users at lists

Apr 18, 2012, 6:44 AM

Post #17 of 52 (1641 views)
Permalink
Re: How-to AirPlay question [In reply to]
A Desai wrote:
> That's why I mentioned - I need to be told - I am no linux champ here;
> barely making it.

... and yet you try to compile it by yourself? There are plenty of
repositories out there for any distribution.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


ashu.desai at gmail

Apr 18, 2012, 7:37 AM

Post #18 of 52 (1644 views)
Permalink
Re: How-to AirPlay question [In reply to]
My friend who also has Myth helps me with issues. I started compiling this
myself in the hope to learn a bit more about linux. However, that is
besides the point. For some reason, even though I have got the fixes/0.25
and compiled it per instructions, something is not working - which is why I
need help.

Thanks,

Ash



On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <mythtv-users [at] lists
> wrote:

> A Desai wrote:
> > That's why I mentioned - I need to be told - I am no linux champ here;
> > barely making it.
>
> ... and yet you try to compile it by yourself? There are plenty of
> repositories out there for any distribution.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>



--
http://about.me/adesai


jk90090 at gmail

Apr 18, 2012, 7:45 AM

Post #19 of 52 (1643 views)
Permalink
Re: How-to AirPlay question [In reply to]
Did you rerun configure, without options, in the base source directory, and then run the make, and install yet?

On Apr 18, 2012, at 7:37 AM, A Desai <ashu.desai [at] gmail> wrote:

> My friend who also has Myth helps me with issues. I started compiling this myself in the hope to learn a bit more about linux. However, that is besides the point. For some reason, even though I have got the fixes/0.25 and compiled it per instructions, something is not working - which is why I need help.
>
> Thanks,
>
> Ash
>
>
>
> On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <mythtv-users [at] lists> wrote:
> A Desai wrote:
> > That's why I mentioned - I need to be told - I am no linux champ here;
> > barely making it.
>
> ... and yet you try to compile it by yourself? There are plenty of
> repositories out there for any distribution.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
>
> --
> http://about.me/adesai
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users


mythtv-users at lists

Apr 18, 2012, 7:52 AM

Post #20 of 52 (1640 views)
Permalink
Re: How-to AirPlay question [In reply to]
A Desai wrote:
> My friend who also has Myth helps me with issues. I started compiling
> this myself in the hope to learn a bit more about linux. However, that
> is besides the point. For some reason, even though I have got the
> fixes/0.25 and compiled it per instructions, something is not working -
> which is why I need help.

Please stop top posting. Trim the quote and write your message below.
Thanks.

I didn't want to offend you in any way. I just wanted to point out that
there are other and easier ways to install MythTV. Especially if the WAF
is important to you ;-) If you want to learn about linux, then that's a
valid reason...

I wouldn't describe me as a beginner nor as "linux champ", but I chose
to use the Mythbuntu repository, since the whole system has to run at
the end of the day when GF comes home ;-)

Thomas
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


ashu.desai at gmail

Apr 18, 2012, 11:03 AM

Post #21 of 52 (1630 views)
Permalink
Re: How-to AirPlay question [In reply to]
On Wed, Apr 18, 2012 at 9:45 AM, Jk90090 <jk90090 [at] gmail> wrote:

> Did you rerun configure, without options, in the base source directory,
> and then run the make, and install yet?
>
>
> On Apr 18, 2012, at 7:37 AM, A Desai <ashu.desai [at] gmail> wrote:
>
> My friend who also has Myth helps me with issues. I started compiling this
> myself in the hope to learn a bit more about linux. However, that is
> besides the point. For some reason, even though I have got the fixes/0.25
> and compiled it per instructions, something is not working - which is why I
> need help.
>
> Thanks,
>
> Ash
>
>
>
> On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <
> mythtv-users [at] lists> wrote:
>
>> A Desai wrote:
>> > That's why I mentioned - I need to be told - I am no linux champ here;
>> > barely making it.
>>
>> ... and yet you try to compile it by yourself? There are plenty of
>> repositories out there for any distribution.
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users [at] mythtv
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>
>
> ==============================================

My apologies for top-posting. No offence taken as far as to why I am not
getting a packaged version. I have been doing this for 6 odd years now, and
slowly getting better. There was a time when I couldn't do jack unless my
friend here helped me out. Now I can do over 50% with this discussion forum
help. So I believe in the next 6 yrs, I should be able to get somewhere!!!
:)

I think the problem was that I did not do make/make install after
installing openssl-devel. I did that under mythplugins (now I know better -
plugins have nothing to do with the AirPlay).

I now see RAOP message - but since I am remote, and via XMING, I am not
sure what I should be seeing.

Just to be funky - I tried SSL VPNing in home on my iPhone, I believe
broadcast/multicast are enabled on my FW as well. But it doesn't see it. I
can only know once I get back home from work to see if it really works.

----------------

[root [at] F mythtv]# ./configure --prefix=/usr --enable-libmp3lame
--enable-libx264 --enable-libvpx --enable-libxvid --enable-nonfree
# Basic Settings
Compile type profile
Compiler cache symlink gcc
DistCC no
qmake /usr/lib/qt47/bin/qmake
install prefix /usr
runtime prefix /usr
CPU x86 x86_32 (model name : Intel(R) Atom(TM)
CPU 230 @ 1.60GHz)
yasm yes
MMX enabled yes
MMX2 enabled yes
3DNow! enabled yes
3DNow! extended enabled yes
SSE enabled yes
SSSE3 enabled yes
CMOV enabled no

# Input Support
Joystick menu yes
lirc support yes
libCEC device support no [/usr/include]
Video4Linux sup. yes (v1 yes)
ivtv support yes
HD-PVR support yes
FireWire support no
DVB support yes [/usr/include]
DVB-S2 support yes
HDHomeRun support yes
Ceton support yes
IPTV support yes
ASI support no

# Sound Output Support
PulseAudio support no
OSS support yes
ALSA support yes
JACK support no
libfftw3 support no

# Video Output Support
x11 support yes
xrandr support yes
xv support yes
VDPAU support yes
VAAPI support no
CrystalHD support no
OpenGL video yes
MHEG support yes
libass subtitle support no

# Misc Features
multi threaded libavcodec yes
libxml2 support yes [/usr/include/libxml2]
libdns_sd (Bonjour) yes
libcrypto yes
Frontend yes
Backend yes
OpenGL ES 2.0 no

# Bindings
bindings_perl yes
bindings_python yes
bindings_php yes

# External Codec Options
mp3lame yes
faac no
xvid yes
x264 yes
vpx yes

Creating libs/libmythbase/mythconfig.h and libs/libmythbase/mythconfig.mak

external/FFmpeg/libavutil/avconfig.h is unchanged
---------------------------------------------------------

Thank you for the help. Now for my remaining couple problems - but that on
another thread.

Appreciate your time/effort everyone.

Ash







--
http://about.me/adesai


ashu.desai at gmail

Apr 18, 2012, 5:56 PM

Post #22 of 52 (1623 views)
Permalink
Re: How-to AirPlay question [In reply to]
On Wed, Apr 18, 2012 at 1:03 PM, A Desai <ashu.desai [at] gmail> wrote:

>
> On Wed, Apr 18, 2012 at 9:45 AM, Jk90090 <jk90090 [at] gmail> wrote:
>
>> Did you rerun configure, without options, in the base source directory,
>> and then run the make, and install yet?
>>
>>
>> On Apr 18, 2012, at 7:37 AM, A Desai <ashu.desai [at] gmail> wrote:
>>
>> My friend who also has Myth helps me with issues. I started compiling
>> this myself in the hope to learn a bit more about linux. However, that is
>> besides the point. For some reason, even though I have got the fixes/0.25
>> and compiled it per instructions, something is not working - which is why I
>> need help.
>>
>> Thanks,
>>
>> Ash
>>
>>
>>
>> On Wed, Apr 18, 2012 at 8:44 AM, Thomas Boehm <
>> mythtv-users [at] lists> wrote:
>>
>>> A Desai wrote:
>>> > That's why I mentioned - I need to be told - I am no linux champ here;
>>> > barely making it.
>>>
>>> ... and yet you try to compile it by yourself? There are plenty of
>>> repositories out there for any distribution.
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users [at] mythtv
>>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>>
>>
>>
>> ==============================================
>
> My apologies for top-posting. No offence taken as far as to why I am not
> getting a packaged version. I have been doing this for 6 odd years now, and
> slowly getting better. There was a time when I couldn't do jack unless my
> friend here helped me out. Now I can do over 50% with this discussion forum
> help. So I believe in the next 6 yrs, I should be able to get somewhere!!!
> :)
>
> I think the problem was that I did not do make/make install after
> installing openssl-devel. I did that under mythplugins (now I know better -
> plugins have nothing to do with the AirPlay).
>
> I now see RAOP message - but since I am remote, and via XMING, I am not
> sure what I should be seeing.
>
> Just to be funky - I tried SSL VPNing in home on my iPhone, I believe
> broadcast/multicast are enabled on my FW as well. But it doesn't see it. I
> can only know once I get back home from work to see if it really works.
>
> ----------------
>
> [root [at] F mythtv]# ./configure --prefix=/usr --enable-libmp3lame
> --enable-libx264 --enable-libvpx --enable-libxvid --enable-nonfree
> # Basic Settings
> Compile type profile
> Compiler cache symlink gcc
> DistCC no
> qmake /usr/lib/qt47/bin/qmake
> install prefix /usr
> runtime prefix /usr
> CPU x86 x86_32 (model name : Intel(R)
> Atom(TM) CPU 230 @ 1.60GHz)
> yasm yes
> MMX enabled yes
> MMX2 enabled yes
> 3DNow! enabled yes
> 3DNow! extended enabled yes
> SSE enabled yes
> SSSE3 enabled yes
> CMOV enabled no
>
> # Input Support
> Joystick menu yes
> lirc support yes
> libCEC device support no [/usr/include]
> Video4Linux sup. yes (v1 yes)
> ivtv support yes
> HD-PVR support yes
> FireWire support no
> DVB support yes [/usr/include]
> DVB-S2 support yes
> HDHomeRun support yes
> Ceton support yes
> IPTV support yes
> ASI support no
>
> # Sound Output Support
> PulseAudio support no
> OSS support yes
> ALSA support yes
> JACK support no
> libfftw3 support no
>
> # Video Output Support
> x11 support yes
> xrandr support yes
> xv support yes
> VDPAU support yes
> VAAPI support no
> CrystalHD support no
> OpenGL video yes
> MHEG support yes
> libass subtitle support no
>
> # Misc Features
> multi threaded libavcodec yes
> libxml2 support yes [/usr/include/libxml2]
> libdns_sd (Bonjour) yes
> libcrypto yes
> Frontend yes
> Backend yes
> OpenGL ES 2.0 no
>
> # Bindings
> bindings_perl yes
> bindings_python yes
> bindings_php yes
>
> # External Codec Options
> mp3lame yes
> faac no
> xvid yes
> x264 yes
> vpx yes
>
> Creating libs/libmythbase/mythconfig.h and libs/libmythbase/mythconfig.mak
>
> external/FFmpeg/libavutil/avconfig.h is unchanged
> ---------------------------------------------------------
>
> Thank you for the help. Now for my remaining couple problems - but that on
> another thread.
>
> Appreciate your time/effort everyone.
>
> Ash
>
>
>
>
>
>
>
> --
> http://about.me/adesai
>


Still no airplay! :( It shows me that RAOP is registered, gives me the name
but I don't see any icon on my IOS devices. Help please...


Ash.

--
http://about.me/adesai


jon at whitear

Apr 18, 2012, 6:00 PM

Post #23 of 52 (1622 views)
Permalink
Re: How-to AirPlay question [In reply to]
> Still no airplay! :( It shows me that RAOP is registered, gives me
> the name but I don't see any icon on my IOS devices. Help please...

Can you give us the frontend log showing the registration etc?
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


ashu.desai at gmail

Apr 18, 2012, 6:10 PM

Post #24 of 52 (1620 views)
Permalink
Re: How-to AirPlay question [In reply to]
On Wed, Apr 18, 2012 at 8:00 PM, Jon Whitear <jon [at] whitear> wrote:

> > Still no airplay! :( It shows me that RAOP is registered, gives me
> > the name but I don't see any icon on my IOS devices. Help please...
>
> Can you give us the frontend log showing the registration etc?
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>


2012-04-18 20:08:12.890286 I RAOP Device: Listening for connections on
port 5001
2012-04-18 20:08:12.892294 I Loading en_us translation for module
mythfrontend
2012-04-18 20:08:13.757076 I Bonjour: Service registration complete: name
'422a36382661 [at] MythTV on FE.local' type '_raop._tcp.' domain: 'local.'

--
http://about.me/adesai


jyavenard at gmail

Apr 18, 2012, 6:31 PM

Post #25 of 52 (1614 views)
Permalink
Re: How-to AirPlay question [In reply to]
On 19 April 2012 11:10, A Desai <ashu.desai [at] gmail> wrote:

> 2012-04-18 20:08:12.890286 I  RAOP Device: Listening for connections on port
> 5001
> 2012-04-18 20:08:12.892294 I  Loading en_us translation for module
> mythfrontend
> 2012-04-18 20:08:13.757076 I  Bonjour: Service registration complete: name
> '422a36382661 [at] MythTV on FE.local' type '_raop._tcp.' domain: 'local.'

You're cutting the logs too much

Make sure you update the source code to today's version.... it will
likely work better for you
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

First page Previous page 1 2 3 Next page Last page  View All MythTV users RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.