Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: MythTV: Users

Problems Running Headless MBE/FE with Fedora 15/Gnome 3

 

 

MythTV users RSS feed   Index | Next | Previous | View Threaded


mache at creeger

Sep 20, 2011, 10:08 AM

Post #1 of 21 (1942 views)
Permalink
Problems Running Headless MBE/FE with Fedora 15/Gnome 3

I recently upgraded my MBE/FE combo to Fedora 15 and am having
problems running it headless. While it normally lives in my garage, I
have the mythtv account autologin and gain access to the FE and
desktop through VNC not to run video but to do various housekeeping
tasks on the GUI. I have tried various xorg.conf configurations and
either X will not load because it cannot find the right edid or when
I can get X and Gnome to load and mythtv auto logs in, I get an error
on the mythtv desktop that states "could not apply the stored
configuration for monitors", "none of the selected modes were
compatible with possible modes: CRTC 354: Trying mode..." and then a
bunch of resolutions in the 50 to 57 Mhz range. The error messages
interferes with my launching and running mythfrontend on the Gnome
desktop. Listed below is my most recent /etc/X11/xorg.conf attempt
with some of the last lines of /var/log/Xorg.0.log. Any ideas would
be most appreciated.

-- Mache

# uname -r
2.6.40.4-5.fc15.x86_64

# rpm -qa | grep mythtv-backend
mythtv-backend-0.24.1-277.fc15.x86_64

# cat /etc/X11/xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version
280.13 (buildmeister [at] swio-display-x86-rhel47-03) Wed Jul
27 17:15:58 PDT 2011

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib64/xorg/modules/extensions"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/default/Type1"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from data in "/etc/sysconfig/keyboard"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync 28.0 - 33.0
# VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
Option "UseEDID" "FALSE"
Option "UseDisplayDevice" "CRT"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "NoLogo" "True"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

; Last few entries to /var/log/Xorg.0.log

[ 22.215] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[ 22.215] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 22.215] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 22.226] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 22.226] (==) NVIDIA(0): RGB weight 888
[ 22.226] (==) NVIDIA(0): Default visual is TrueColor
[ 22.226] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 22.226] (**) NVIDIA(0): Option "NoLogo" "True"
[ 22.226] (**) NVIDIA(0): Option "UseEDID" "FALSE"
[ 22.226] (**) NVIDIA(0): Option "UseDisplayDevice" "CRT"
[ 22.226] (**) NVIDIA(0): Ignoring EDIDs
[ 22.941] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
[ 22.942] (II) NVIDIA(0): NVIDIA GPU GeForce 8400GS (GT218) at
PCI:1:0:0 (GPU-0)
[ 22.942] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 22.942] (--) NVIDIA(0): VideoBIOS: 70.18.76.00.02
[ 22.943] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 22.943] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 22.943] (--) NVIDIA(0): Connected display device(s) on GeForce
8400GS at PCI:1:0:0
[ 22.943] (--) NVIDIA(0): CRT-1
[ 22.943] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 22.946] (II) NVIDIA(0): Option "UseDisplayDevice" "CRT"
converted to "CRT-1".
[ 22.946] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from
the EDID has been
[ 22.946] (**) NVIDIA(0): enabled on all display devices.
[ 22.949] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 22.949] (==) NVIDIA(0):
[ 22.949] (==) NVIDIA(0): No modes were requested; the default
mode "nvidia-auto-select"
[ 22.949] (==) NVIDIA(0): will be used as the requested mode.
[ 22.949] (==) NVIDIA(0):
[ 22.949] (II) NVIDIA(0): Validated modes:
[ 22.949] (II) NVIDIA(0): "nvidia-auto-select"
[ 22.949] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 22.970] (WW) NVIDIA(0): Unable to get display device CRT-1's
EDID; cannot compute DPI
[ 22.970] (WW) NVIDIA(0): from CRT-1's EDID.
[ 22.970] (==) NVIDIA(0): DPI set to (75, 75); computed from
built-in default
[ 22.970] (--) Depth 24 pixmap format is 32 bpp
[ 22.970] (II) NVIDIA: Using 768.00 MB of virtual memory for
indirect memory access.
[ 22.975] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 22.997] (II) Loading extension NV-GLX
[ 23.038] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 23.038] (==) NVIDIA(0): Backing store disabled
[ 23.038] (==) NVIDIA(0): Silken mouse enabled
[ 23.039] (**) NVIDIA(0): DPMS enabled
[ 23.039] (II) Loading extension NV-CONTROL
[ 23.039] (II) Loading extension XINERAMA
[ 23.039] (II) Loading sub module "dri2"
[ 23.039] (II) LoadModule: "dri2"
[ 23.040] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 23.040] (II) Module dri2: vendor="X.Org Foundation"
[ 23.040] compiled for 1.10.4, module version = 1.2.0
[ 23.040] ABI class: X.Org Server Extension, version 5.0
[ 23.040] (II) NVIDIA(0): [DRI2] Setup complete
[ 23.040] (==) RandR enabled
[ 23.040] (II) Initializing built-in extension Generic Event Extension
[ 23.040] (II) Initializing built-in extension SHAPE
[ 23.040] (II) Initializing built-in extension MIT-SHM
[ 23.040] (II) Initializing built-in extension XInputExtension
[ 23.040] (II) Initializing built-in extension XTEST
[ 23.040] (II) Initializing built-in extension BIG-REQUESTS
[ 23.040] (II) Initializing built-in extension SYNC
[ 23.040] (II) Initializing built-in extension XKEYBOARD
[ 23.040] (II) Initializing built-in extension XC-MISC
[ 23.040] (II) Initializing built-in extension XINERAMA
[ 23.040] (II) Initializing built-in extension XFIXES
[ 23.040] (II) Initializing built-in extension RENDER
[ 23.040] (II) Initializing built-in extension RANDR
[ 23.040] (II) Initializing built-in extension COMPOSITE
[ 23.040] (II) Initializing built-in extension DAMAGE
[ 23.040] (II) SELinux: Disabled on system
[ 23.041] (II) Initializing extension GLX
[ 23.458] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 23.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.458] (**) Power Button: Applying InputClass "system-setup-keyboard"
[ 23.458] (II) LoadModule: "evdev"
[ 23.459] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 23.488] (II) Module evdev: vendor="X.Org Foundation"
[ 23.489] compiled for 1.10.1, module version = 2.6.0
[ 23.489] Module class: X.Org XInput Driver
[ 23.489] ABI class: X.Org XInput driver, version 12.2
[ 23.489] (II) Using input driver 'evdev' for 'Power Button'
[ 23.489] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 23.489] (**) Power Button: always reports core events
[ 23.489] (**) Power Button: Device: "/dev/input/event1"
[ 23.489] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.489] (--) Power Button: Found keys
[ 23.489] (II) Power Button: Configuring as keyboard
[ 23.489] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 23.489] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD)
[ 23.489] (**) Option "xkb_rules" "evdev"
[ 23.489] (**) Option "xkb_model" "pc105+inet"
[ 23.489] (**) Option "xkb_layout" "us"
[ 23.489] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 23.523] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 23.523] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.523] (**) Power Button: Applying InputClass "system-setup-keyboard"
[ 23.523] (II) Using input driver 'evdev' for 'Power Button'
[ 23.523] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 23.523] (**) Power Button: always reports core events
[ 23.523] (**) Power Button: Device: "/dev/input/event0"
[ 23.523] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.523] (--) Power Button: Found keys
[ 23.523] (II) Power Button: Configuring as keyboard
[ 23.523] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 23.523] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD)
[ 23.523] (**) Option "xkb_rules" "evdev"
[ 23.523] (**) Option "xkb_model" "pc105+inet"
[ 23.523] (**) Option "xkb_layout" "us"
[ 23.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
(/dev/input/event4)
[ 23.525] (II) No input driver/identifier specified (ignoring)
[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
(/dev/input/event5)
[ 23.525] (II) No input driver/identifier specified (ignoring)
[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
(/dev/input/event6)
[ 23.525] (II) No input driver/identifier specified (ignoring)
[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
(/dev/input/event7)
[ 23.525] (II) No input driver/identifier specified (ignoring)
[ 23.534] (II) config/udev: Adding input device AT Translated Set
2 keyboard (/dev/input/event2)
[ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
"system-setup-keyboard"
[ 23.534] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 23.534] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 23.534] (**) AT Translated Set 2 keyboard: always reports core events
[ 23.534] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 23.534] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 23.534] (--) AT Translated Set 2 keyboard: Found keys
[ 23.534] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 23.534] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 23.534] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD)
[ 23.534] (**) Option "xkb_rules" "evdev"
[ 23.534] (**) Option "xkb_model" "pc105+inet"
[ 23.534] (**) Option "xkb_layout" "us"
[ 23.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
[ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
Wheel Mouse (/dev/input/event3)
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass
"evdev pointer catchall"
[ 23.535] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 23.535] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
[ 23.535] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 23.535] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 23.535] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.535] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
[ 23.535] (II) XINPUT: Adding extended input device "ImPS/2
Generic Wheel Mouse" (type: MOUSE)
[ 23.535] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping
acceleration scheme 1
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration
factor: 2.000
[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
Wheel Mouse (/dev/input/mouse0)
[ 23.535] (II) No input driver/identifier specified (ignoring)

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


mache at creeger

Sep 21, 2011, 7:05 AM

Post #2 of 21 (1885 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

Any ideas? Can folks running Headless Fedora 15 MBEs who want to use
the GUI over vnc post their xorg.conf files?

-- Mache

At 10:08 AM 9/20/2011, Mache Creeger wrote:
>I recently upgraded my MBE/FE combo to Fedora 15 and am having
>problems running it headless. While it normally lives in my garage, I
>have the mythtv account autologin and gain access to the FE and
>desktop through VNC not to run video but to do various housekeeping
>tasks on the GUI. I have tried various xorg.conf configurations and
>either X will not load because it cannot find the right edid or when
>I can get X and Gnome to load and mythtv auto logs in, I get an error
>on the mythtv desktop that states "could not apply the stored
>configuration for monitors", "none of the selected modes were
>compatible with possible modes: CRTC 354: Trying mode..." and then a
>bunch of resolutions in the 50 to 57 Mhz range. The error messages
>interferes with my launching and running mythfrontend on the Gnome
>desktop. Listed below is my most recent /etc/X11/xorg.conf attempt
>with some of the last lines of /var/log/Xorg.0.log. Any ideas would
>be most appreciated.
>
>-- Mache
>
># uname -r
>2.6.40.4-5.fc15.x86_64
>
># rpm -qa | grep mythtv-backend
>mythtv-backend-0.24.1-277.fc15.x86_64
>
># cat /etc/X11/xorg.conf
>
># nvidia-xconfig: X configuration file generated by nvidia-xconfig
># nvidia-xconfig: version
>280.13 (buildmeister [at] swio-display-x86-rhel47-03) Wed Jul
>27 17:15:58 PDT 2011
>
>Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
>EndSection
>
>Section "Files"
> ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
> ModulePath "/usr/lib64/xorg/modules/extensions"
> ModulePath "/usr/lib64/xorg/modules"
> FontPath "/usr/share/fonts/default/Type1"
>EndSection
>
>Section "InputDevice"
>
> # generated from default
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
>EndSection
>
>Section "InputDevice"
>
> # generated from data in "/etc/sysconfig/keyboard"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbLayout" "us"
> Option "XkbModel" "pc105"
>EndSection
>
>Section "Monitor"
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "Unknown"
># HorizSync 28.0 - 33.0
># VertRefresh 43.0 - 72.0
> Option "DPMS"
>EndSection
>
>Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> Option "UseEDID" "FALSE"
> Option "UseDisplayDevice" "CRT"
> VendorName "NVIDIA Corporation"
>EndSection
>
>Section "Screen"
> Identifier "Screen0"
> Device "Device0"
> Monitor "Monitor0"
> Option "NoLogo" "True"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> EndSubSection
>EndSection
>
>; Last few entries to /var/log/Xorg.0.log
>
>[ 22.215] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
>[ 22.215] (II) Loading /usr/lib64/xorg/modules/libwfb.so
>[ 22.215] (II) Loading /usr/lib64/xorg/modules/libfb.so
>[ 22.226] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
>[ 22.226] (==) NVIDIA(0): RGB weight 888
>[ 22.226] (==) NVIDIA(0): Default visual is TrueColor
>[ 22.226] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
>[ 22.226] (**) NVIDIA(0): Option "NoLogo" "True"
>[ 22.226] (**) NVIDIA(0): Option "UseEDID" "FALSE"
>[ 22.226] (**) NVIDIA(0): Option "UseDisplayDevice" "CRT"
>[ 22.226] (**) NVIDIA(0): Ignoring EDIDs
>[ 22.941] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
>[ 22.942] (II) NVIDIA(0): NVIDIA GPU GeForce 8400GS (GT218) at
>PCI:1:0:0 (GPU-0)
>[ 22.942] (--) NVIDIA(0): Memory: 1048576 kBytes
>[ 22.942] (--) NVIDIA(0): VideoBIOS: 70.18.76.00.02
>[ 22.943] (II) NVIDIA(0): Detected PCI Express Link width: 16X
>[ 22.943] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
>[ 22.943] (--) NVIDIA(0): Connected display device(s) on GeForce
>8400GS at PCI:1:0:0
>[ 22.943] (--) NVIDIA(0): CRT-1
>[ 22.943] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
>[ 22.946] (II) NVIDIA(0): Option "UseDisplayDevice" "CRT"
>converted to "CRT-1".
>[ 22.946] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from
>the EDID has been
>[ 22.946] (**) NVIDIA(0): enabled on all display devices.
>[ 22.949] (II) NVIDIA(0): Assigned Display Device: CRT-1
>[ 22.949] (==) NVIDIA(0):
>[ 22.949] (==) NVIDIA(0): No modes were requested; the default
>mode "nvidia-auto-select"
>[ 22.949] (==) NVIDIA(0): will be used as the requested mode.
>[ 22.949] (==) NVIDIA(0):
>[ 22.949] (II) NVIDIA(0): Validated modes:
>[ 22.949] (II) NVIDIA(0): "nvidia-auto-select"
>[ 22.949] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
>[ 22.970] (WW) NVIDIA(0): Unable to get display device CRT-1's
>EDID; cannot compute DPI
>[ 22.970] (WW) NVIDIA(0): from CRT-1's EDID.
>[ 22.970] (==) NVIDIA(0): DPI set to (75, 75); computed from
>built-in default
>[ 22.970] (--) Depth 24 pixmap format is 32 bpp
>[ 22.970] (II) NVIDIA: Using 768.00 MB of virtual memory for
>indirect memory access.
>[ 22.975] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
>[ 22.997] (II) Loading extension NV-GLX
>[ 23.038] (==) NVIDIA(0): Disabling shared memory pixmaps
>[ 23.038] (==) NVIDIA(0): Backing store disabled
>[ 23.038] (==) NVIDIA(0): Silken mouse enabled
>[ 23.039] (**) NVIDIA(0): DPMS enabled
>[ 23.039] (II) Loading extension NV-CONTROL
>[ 23.039] (II) Loading extension XINERAMA
>[ 23.039] (II) Loading sub module "dri2"
>[ 23.039] (II) LoadModule: "dri2"
>[ 23.040] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
>[ 23.040] (II) Module dri2: vendor="X.Org Foundation"
>[ 23.040] compiled for 1.10.4, module version = 1.2.0
>[ 23.040] ABI class: X.Org Server Extension, version 5.0
>[ 23.040] (II) NVIDIA(0): [DRI2] Setup complete
>[ 23.040] (==) RandR enabled
>[ 23.040] (II) Initializing built-in extension Generic Event Extension
>[ 23.040] (II) Initializing built-in extension SHAPE
>[ 23.040] (II) Initializing built-in extension MIT-SHM
>[ 23.040] (II) Initializing built-in extension XInputExtension
>[ 23.040] (II) Initializing built-in extension XTEST
>[ 23.040] (II) Initializing built-in extension BIG-REQUESTS
>[ 23.040] (II) Initializing built-in extension SYNC
>[ 23.040] (II) Initializing built-in extension XKEYBOARD
>[ 23.040] (II) Initializing built-in extension XC-MISC
>[ 23.040] (II) Initializing built-in extension XINERAMA
>[ 23.040] (II) Initializing built-in extension XFIXES
>[ 23.040] (II) Initializing built-in extension RENDER
>[ 23.040] (II) Initializing built-in extension RANDR
>[ 23.040] (II) Initializing built-in extension COMPOSITE
>[ 23.040] (II) Initializing built-in extension DAMAGE
>[ 23.040] (II) SELinux: Disabled on system
>[ 23.041] (II) Initializing extension GLX
>[ 23.458] (II) config/udev: Adding input device Power Button
>(/dev/input/event1)
>[ 23.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[ 23.458] (**) Power Button: Applying InputClass "system-setup-keyboard"
>[ 23.458] (II) LoadModule: "evdev"
>[ 23.459] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
>[ 23.488] (II) Module evdev: vendor="X.Org Foundation"
>[ 23.489] compiled for 1.10.1, module version = 2.6.0
>[ 23.489] Module class: X.Org XInput Driver
>[ 23.489] ABI class: X.Org XInput driver, version 12.2
>[ 23.489] (II) Using input driver 'evdev' for 'Power Button'
>[ 23.489] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
>[ 23.489] (**) Power Button: always reports core events
>[ 23.489] (**) Power Button: Device: "/dev/input/event1"
>[ 23.489] (--) evdev: Power Button: Vendor 0 Product 0x1
>[ 23.489] (--) Power Button: Found keys
>[ 23.489] (II) Power Button: Configuring as keyboard
>[ 23.489] (**) Option "config_info"
>"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
>[ 23.489] (II) XINPUT: Adding extended input device "Power Button"
>(type: KEYBOARD)
>[ 23.489] (**) Option "xkb_rules" "evdev"
>[ 23.489] (**) Option "xkb_model" "pc105+inet"
>[ 23.489] (**) Option "xkb_layout" "us"
>[ 23.489] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
>[ 23.523] (II) config/udev: Adding input device Power Button
>(/dev/input/event0)
>[ 23.523] (**) Power Button: Applying InputClass "evdev keyboard catchall"
>[ 23.523] (**) Power Button: Applying InputClass "system-setup-keyboard"
>[ 23.523] (II) Using input driver 'evdev' for 'Power Button'
>[ 23.523] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
>[ 23.523] (**) Power Button: always reports core events
>[ 23.523] (**) Power Button: Device: "/dev/input/event0"
>[ 23.523] (--) evdev: Power Button: Vendor 0 Product 0x1
>[ 23.523] (--) Power Button: Found keys
>[ 23.523] (II) Power Button: Configuring as keyboard
>[ 23.523] (**) Option "config_info"
>"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
>[ 23.523] (II) XINPUT: Adding extended input device "Power Button"
>(type: KEYBOARD)
>[ 23.523] (**) Option "xkb_rules" "evdev"
>[ 23.523] (**) Option "xkb_model" "pc105+inet"
>[ 23.523] (**) Option "xkb_layout" "us"
>[ 23.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
>[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
>(/dev/input/event4)
>[ 23.525] (II) No input driver/identifier specified (ignoring)
>[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
>(/dev/input/event5)
>[ 23.525] (II) No input driver/identifier specified (ignoring)
>[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
>(/dev/input/event6)
>[ 23.525] (II) No input driver/identifier specified (ignoring)
>[ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
>(/dev/input/event7)
>[ 23.525] (II) No input driver/identifier specified (ignoring)
>[ 23.534] (II) config/udev: Adding input device AT Translated Set
>2 keyboard (/dev/input/event2)
>[ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
>"evdev keyboard catchall"
>[ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
>"system-setup-keyboard"
>[ 23.534] (II) Using input driver 'evdev' for 'AT Translated Set
>2 keyboard'
>[ 23.534] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
>[ 23.534] (**) AT Translated Set 2 keyboard: always reports core events
>[ 23.534] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
>[ 23.534] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
>[ 23.534] (--) AT Translated Set 2 keyboard: Found keys
>[ 23.534] (II) AT Translated Set 2 keyboard: Configuring as keyboard
>[ 23.534] (**) Option "config_info"
>"udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
>[ 23.534] (II) XINPUT: Adding extended input device "AT Translated
>Set 2 keyboard" (type: KEYBOARD)
>[ 23.534] (**) Option "xkb_rules" "evdev"
>[ 23.534] (**) Option "xkb_model" "pc105+inet"
>[ 23.534] (**) Option "xkb_layout" "us"
>[ 23.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
>[ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
>Wheel Mouse (/dev/input/event3)
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass
>"evdev pointer catchall"
>[ 23.535] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
>[ 23.535] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: always reports core events
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
>[ 23.535] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
>[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
>[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
>[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
>[ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
>[ 23.535] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
>[ 23.535] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4,
>EmulateWheelInertia: 10, EmulateWheelTimeout: 200
>[ 23.535] (**) Option "config_info"
>"udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
>[ 23.535] (II) XINPUT: Adding extended input device "ImPS/2
>Generic Wheel Mouse" (type: MOUSE)
>[ 23.535] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping
>acceleration scheme 1
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration
>factor: 2.000
>[ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration
>threshold: 4
>[ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
>Wheel Mouse (/dev/input/mouse0)
>[ 23.535] (II) No input driver/identifier specified (ignoring)
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users [at] mythtv
>http://www.mythtv.org/mailman/listinfo/mythtv-users


mythtv at blandford

Sep 21, 2011, 7:19 AM

Post #3 of 21 (1884 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On 09/21/2011 07:05 AM, Mache Creeger wrote:
> Any ideas? Can folks running Headless Fedora 15 MBEs who want to use the
> GUI over vnc post their xorg.conf files?
>

You do not even need X running or to have xorg.conf configured on the
backend to run headless.

When you run the X application on the mythbackend, it uses the X
configuration on the "client" machine that is displaying the content.

Michael

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


mache at creeger

Sep 21, 2011, 11:35 AM

Post #4 of 21 (1870 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

At 07:19 AM 9/21/2011, mythtv [at] blandford wrote:
>On 09/21/2011 07:05 AM, Mache Creeger wrote:
> > Any ideas? Can folks running Headless Fedora 15 MBEs who want to use the
> > GUI over vnc post their xorg.conf files?
> >
>
>You do not even need X running or to have xorg.conf configured on the
>backend to run headless.
>
>When you run the X application on the mythbackend, it uses the X
>configuration on the "client" machine that is displaying the content.
>
>Michael

Are you saying I can run X on TightVNC on Windows 7? That is my client.

-- Mache


krisbee at krisbee

Sep 21, 2011, 11:40 AM

Post #5 of 21 (1873 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On Wednesday, September 21, 2011 11:35 AM, "Mache Creeger"
<mache [at] creeger> wrote:

At 07:19 AM 9/21/2011, mythtv [at] blandford wrote:

On 09/21/2011 07:05 AM, Mache Creeger wrote:
> Any ideas? Can folks running Headless Fedora 15 MBEs who
want to use the
> GUI over vnc post their xorg.conf files?
>
You do not even need X running or to have xorg.conf configured
on the
backend to run headless.
When you run the X application on the mythbackend, it uses the
X
configuration on the "client" machine that is displaying the
content.
Michael

Are you saying I can run X on TightVNC on Windows 7? That is
my client.



I run X on windows 7 when I ssh into my frontend (running
mythbuntu), yup.
--
Kris B.
[1]krisbee [at] krisbee

References

1. mailto:krisbee [at] krisbee


circushair at gmail

Sep 21, 2011, 11:57 AM

Post #6 of 21 (1870 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

> Are you saying I can run X on TightVNC on Windows 7? That is my client.

If you are going to use VNC you can boot your backend to the text only
console. Then use putty (or similar) to ssh into the backend from
your Windows computer. Start vncserver from the ssh session and then
launch your favorite VNC client on the windows box to connect over to
the backend.

If you're new to Linux it isn't necessarily straight forward but
nothing a bit of Google-Fu can't overcome.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


mache at creeger

Sep 21, 2011, 12:09 PM

Post #7 of 21 (1873 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

At 11:57 AM 9/21/2011, Mark Boyum wrote:
> > Are you saying I can run X on TightVNC on Windows 7? That is my client.
>
>If you are going to use VNC you can boot your backend to the text only
>console. Then use putty (or similar) to ssh into the backend from
>your Windows computer. Start vncserver from the ssh session and then
>launch your favorite VNC client on the windows box to connect over to
>the backend.
>
>If you're new to Linux it isn't necessarily straight forward but
>nothing a bit of Google-Fu can't overcome.

Thanks but what I really want is to have Gnome 3 running on my Fedora
15 MBE and access the GUI using TightVNC on my Windows 7 laptop. I
really do now want to run X and Gnome 3 on the laptop if I can avoid
it as I need to keep the overhead on the laptop to a minimum.

My issue is how to get Gnome (and X) to boot without an attached
monitor, keyboard, and mouse. I had it running on Fedora 13, but when
I upgraded to Fedora 15 that /etc/X11/xorg.conf stopped working. I
printed out my most recent /etc/X11/xorg.conf and /var/logXorg.0.log
files in a previous post.

Any ideas?

-- Mache


circushair at gmail

Sep 21, 2011, 12:34 PM

Post #8 of 21 (1864 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

> My issue is how to get Gnome (and X) to boot without an attached monitor,
> keyboard, and mouse. I had it running on Fedora 13, but when I upgraded to
> Fedora 15 that /etc/X11/xorg.conf stopped working. I printed out my most
> recent /etc/X11/xorg.conf and /var/logXorg.0.log files in a previous post.
>
> Any ideas?
>
> -- Mache

I found this on an Ubuntu forum but as it applies to the Nvidia
Xserver it may well work on Fedora as well.

Try adding the following to your xorg.conf file under the "Device" section:
Option "ConnectedMonitor" "CRT-1"
Option "IgnoreEDID" "TRUE"
Option "UseEDID" "FALSE"
Option "UseEDIDFreqs" "FALSE"
Option "UseEDIDDPi" "FALSE"
Option "ModeValidation" "NoEdidModes"

Hope that helps.
-Mark
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


mythtv at blandford

Sep 21, 2011, 12:41 PM

Post #9 of 21 (1864 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On 09/21/2011 12:09 PM, Mache Creeger wrote:
> At 11:57 AM 9/21/2011, Mark Boyum wrote:
>> > Are you saying I can run X on TightVNC on Windows 7? That is my client.
>>
>> If you are going to use VNC you can boot your backend to the text only
>> console. Then use putty (or similar) to ssh into the backend from
>> your Windows computer. Start vncserver from the ssh session and then
>> launch your favorite VNC client on the windows box to connect over to
>> the backend.
>>
>> If you're new to Linux it isn't necessarily straight forward but
>> nothing a bit of Google-Fu can't overcome.
>
> Thanks but what I really want is to have Gnome 3 running on my Fedora 15
> MBE and access the GUI using TightVNC on my Windows 7 laptop. I really
> do now want to run X and Gnome 3 on the laptop if I can avoid it as I
> need to keep the overhead on the laptop to a minimum.
>
> My issue is how to get Gnome (and X) to boot without an attached
> monitor, keyboard, and mouse. I had it running on Fedora 13, but when I
> upgraded to Fedora 15 that /etc/X11/xorg.conf stopped working. I printed
> out my most recent /etc/X11/xorg.conf and /var/logXorg.0.log files in a
> previous post.

There isn't any point in running those services on the console if you
aren't going to use the console.

Start a vncserver on the backend. Modify the xstartup file for
vncserver to start your gnome session. Then connect to it using tightvnc.

All the processes run on the backend and you just view them on the frontend.

Now you can connect and disconnect to the session as much as you want.
You can also run the mythtvsetup from this session.

Michael



_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


DEPontius at edgehp

Sep 21, 2011, 12:46 PM

Post #10 of 21 (1870 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On 09/21/2011 03:09 PM, Mache Creeger wrote:
> At 11:57 AM 9/21/2011, Mark Boyum wrote:
>> > Are you saying I can run X on TightVNC on Windows 7? That is my client.
>>
>> If you are going to use VNC you can boot your backend to the text only
>> console. Then use putty (or similar) to ssh into the backend from
>> your Windows computer. Start vncserver from the ssh session and then
>> launch your favorite VNC client on the windows box to connect over to
>> the backend.
>>
>> If you're new to Linux it isn't necessarily straight forward but
>> nothing a bit of Google-Fu can't overcome.
>
> Thanks but what I really want is to have Gnome 3 running on my Fedora
> 15 MBE and access the GUI using TightVNC on my Windows 7 laptop. I
> really do now want to run X and Gnome 3 on the laptop if I can avoid
> it as I need to keep the overhead on the laptop to a minimum.
>
> My issue is how to get Gnome (and X) to boot without an attached
> monitor, keyboard, and mouse. I had it running on Fedora 13, but when
> I upgraded to Fedora 15 that /etc/X11/xorg.conf stopped working. I
> printed out my most recent /etc/X11/xorg.conf and /var/logXorg.0.log
> files in a previous post.
>
> Any ideas?
>
Please realize here that people are talking about several different
things here, and perhaps some are getting them confused.

* When you ssh in and then export X to somewhere else, the X server is
running on that somewhere else.

* When you want to use VNC, that means that a VNC X server is running on
the headless machine.

* It sounds to me like you want the headless machine to have the mythtv
user do an autologin and start the GNOME desktop.

Believe it or not, that's a different matter entirely. Typically
autologin is a function of the display manager, though it can be done in
other ways. The display manager requires a display, or at least an X
server, and I don't know of a way to make the VNC server fill that bill.

I suspect your best bet is the "Ignore EDID" stuff that Mark Boyum
suggests, and allow a real X server to start and mythtv to autologin.
Then you want to get a thing called "x11vnc" and have the mythtv user
run that. At that point you'll be able to use VNC to get in and see the
desktop.

An alternative would be to run some sort of initscript as root to start
a text-mode session for the mythtv user. Then presumably in .profile
the mythtv user would start a regular VNC server (not x11vnc - a
special-case VNC server that attaches to a running X session) and then
start /usr/bin/gnome-session. There would likely have to be some
monkeying in there with DISPLAY and xauth cookies, as well. I've never
tried to do this, and therefore can't tell you exactly how to do it.

Dale Pontius


linuxguy123 at gmail

Sep 21, 2011, 1:16 PM

Post #11 of 21 (1856 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

I have several headless servers running F15 these days.

I connecting to them with ssh and running graphical KDE and gnome apps
remotely from my Linux box. Which also runs F15. It works very well,
especially now that I have wireless N. Its pretty much seemless on a
gigabit netowork.

The hardest part is finding/remembering the command line name for the apps
(Do an edit on KStart and look at the properties for each). The other
issue is remembering to look at the title bar to see if the app is running
locally or remotely. Other than that, its totally great. I don't think
it would work on a Windows box though...

FWIW, I keep the servers at runlevel 3. ie systemctl isolate
runlevel3.target in systemd paralance, even though they have the full
graphical installation on them.

HTH.


mythtv at blandford

Sep 21, 2011, 1:16 PM

Post #12 of 21 (1868 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

>>
> Please realize here that people are talking about several different
> things here, and perhaps some are getting them confused.

I am not confused on the potential solutions. I think there are just
various solutions being provided. So far I haven't seen a compelling
reason to run X on the console. Since that isn't a hard requirement,
VNC seems to be the easiest solution.

> * When you ssh in and then export X to somewhere else, the X server is
> running on that somewhere else.

Correct. For X11, the "server" is the application that is actually
doing the display of the X window system. The computer running the
application is the client. This is a source of much confusion for people.

> * When you want to use VNC, that means that a VNC X server is running on
> the headless machine.

Correct. It is running an X server, but it is not running on the
console. It doesn't connect to any real video device.

> * It sounds to me like you want the headless machine to have the mythtv
> user do an autologin and start the GNOME desktop.

That is my understanding as well.

> Believe it or not, that's a different matter entirely. Typically
> autologin is a function of the display manager, though it can be done in
> other ways. The display manager requires a display, or at least an X
> server, and I don't know of a way to make the VNC server fill that bill.

Edit /etc/sysconfig/vncservers. Create a display name and user pair.
Then turn on the vncserver service. It is easier than configuring Xdm,
GDM, etc and still doesn't require any Xorg.conf or the use of the local
video card.

Michael



_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


mythtv at blandford

Sep 21, 2011, 1:21 PM

Post #13 of 21 (1881 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On 09/21/2011 01:16 PM, linux guy wrote:
> I have several headless servers running F15 these days.
>
> I connecting to them with ssh and running graphical KDE and gnome apps
> remotely from my Linux box. Which also runs F15. It works very well,
> especially now that I have wireless N. Its pretty much seemless on a
> gigabit netowork.
>
> The hardest part is finding/remembering the command line name for the
> apps (Do an edit on KStart and look at the properties for each). The
> other issue is remembering to look at the title bar to see if the app is
> running locally or remotely. Other than that, its totally great. I
> don't think it would work on a Windows box though...


This will work on Windows as long as you have an Xserver installed for
Windows. However, the poster mentioned wanting to keep the software
install light on the windows box so I ruled out this option.

Using the VNC solution and running gnome on the backend however gives
the user the full menu system without having to remember the application
names.

> FWIW, I keep the servers at runlevel 3. ie systemctl isolate
> runlevel3.target in systemd paralance, even though they have the full
> graphical installation on them.

Yup. I do the same thing.

Michael

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


linuxguy123 at gmail

Sep 21, 2011, 1:30 PM

Post #14 of 21 (1855 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On Wed, Sep 21, 2011 at 2:21 PM, mythtv [at] blandford
<mythtv [at] blandford>wrote:

> On 09/21/2011 01:16 PM, linux guy wrote:
> > I have several headless servers running F15 these days.
> >
> > The hardest part is finding/remembering the command line name for the
> > apps (Do an edit on KStart and look at the properties for each). The
> > other issue is remembering to look at the title bar to see if the app is
> > running locally or remotely. Other than that, its totally great. I
> > don't think it would work on a Windows box though...
>
>
> This will work on Windows as long as you have an Xserver installed for
> Windows. However, the poster mentioned wanting to keep the software
> install light on the windows box so I ruled out this option.
>
> Using the VNC solution and running gnome on the backend however gives
> the user the full menu system without having to remember the application
> names.
>

Yes, but it runs the whole desktop then. Then you have a desktop in a
desktop, which I find very clumsy. I much prefer a "ssh'd application"
running remotely. Its like the good ole thin client days from the
mainframe.


krisbee at krisbee

Sep 21, 2011, 1:33 PM

Post #15 of 21 (1856 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On Wednesday, September 21, 2011 2:16 PM, "linux guy"
<linuxguy123 [at] gmail> wrote:

The hardest part is finding/remembering the command line name
for the apps (Do an edit on KStart and look at the properties
for each). The other issue is remembering to look at the
title bar to see if the app is running locally or remotely.
Other than that, its totally great. I don't think it would
work on a Windows box though...



It does... you just have to install an x server on a windows
machine (which I have). Then I ssh (using PuTTY) into either or
my machines and I can run my programs on the remote machines and
display on the local windows machine. Finding the free (as in
beer) xserver files is a bit challenging, it is hidden on a
website somewhere and that site makes you think you need to
purchase it, but you don't. Small program, no biggie to have it
running and waiting for when I decide to ssh into a machine to
run a program (so much easier catalog dvd's when they are with
you in the living room then to have to carry them into the
computer room :) )
--
Kris B.
[1]krisbee [at] krisbee

References

1. mailto:krisbee [at] krisbee


linuxguy123 at gmail

Sep 21, 2011, 7:35 PM

Post #16 of 21 (1835 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

Discussion in another thread has lead me to believe that I can host my NAS
and Myth BE services on the same machine. For that purpose, the Obsidian
with all its drive bays and expandability, wins hands down over the
Shuttle. I might even try running Zoneminder on it too.


Jens.Peder.Terjesen at devoteam

Sep 22, 2011, 8:38 AM

Post #17 of 21 (1824 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

Kris B. Wrote:
----------------------------------------------
  
It does... you just have to install an x server on a windows machine (which I have).  Then I ssh (using PuTTY) into either or my machines and I can run my programs on the remote machines and display on the local windows machine.  Finding the free (as in beer) xserver files is a bit challenging, it is hidden on a website somewhere and that site makes you think you need to purchase it, but you don't.  Small program, no biggie to have it running and waiting for when I decide to ssh into a machine to run a program (so much easier catalog dvd's when they are with you in the living room then to have to carry them into the computer room :) )
----------------------------------------------

Cygwin-X is free and works quite well.
http://x.cygwin.com/

Being accustomed to the Linux/Bash command line interface I find this less clumsy than PuTTY.

Jens
 
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


krisbee at krisbee

Sep 22, 2011, 9:06 AM

Post #18 of 21 (1824 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On Thursday, September 22, 2011 3:38 PM, "Terjesen Jens Peder"
<Jens.Peder.Terjesen [at] devoteam> wrote:
> Kris B. Wrote:
> ----------------------------------------------
>   
> It does... you just have to install an x server on a windows machine
> (which I have).  Then I ssh (using PuTTY) into either or my machines and
> I can run my programs on the remote machines and display on the local
> windows machine.  Finding the free (as in beer) xserver files is a bit
> challenging, it is hidden on a website somewhere and that site makes you
> think you need to purchase it, but you don't.  Small program, no biggie
> to have it running and waiting for when I decide to ssh into a machine to
> run a program (so much easier catalog dvd's when they are with you in the
> living room then to have to carry them into the computer room :) )
> ----------------------------------------------
>
> Cygwin-X is free and works quite well.
> http://x.cygwin.com/
>
> Being accustomed to the Linux/Bash command line interface I find this
> less clumsy than PuTTY.
>
> Jens
>  
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
I used xwin32 (I think, maybe it is xming I use) and putty - I ssh into
my machine and xwin32/xming will display anything NOT in the putty
console.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


moitinho at civil

Sep 22, 2011, 9:43 AM

Post #19 of 21 (1828 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On Thursday 22 September 2011, Kris B. wrote:
> On Thursday, September 22, 2011 3:38 PM, "Terjesen Jens Peder"
>
> <Jens.Peder.Terjesen [at] devoteam> wrote:
> > Kris B. Wrote:
> > ----------------------------------------------
> >
> > It does... you just have to install an x server on a windows machine
> > (which I have). Then I ssh (using PuTTY) into either or my machines and
> > I can run my programs on the remote machines and display on the local
> > windows machine. Finding the free (as in beer) xserver files is a bit
> > challenging, it is hidden on a website somewhere and that site makes you
> > think you need to purchase it, but you don't. Small program, no biggie
> > to have it running and waiting for when I decide to ssh into a machine to
> > run a program (so much easier catalog dvd's when they are with you in the
> > living room then to have to carry them into the computer room :) )
> > ----------------------------------------------
> >
> > Cygwin-X is free and works quite well.
> > http://x.cygwin.com/
> >
> > Being accustomed to the Linux/Bash command line interface I find this
> > less clumsy than PuTTY.
> >
> > Jens
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users [at] mythtv
> > http://www.mythtv.org/mailman/listinfo/mythtv-users
>
> I used xwin32 (I think, maybe it is xming I use) and putty - I ssh into
> my machine and xwin32/xming will display anything NOT in the putty
> console.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users

You can also try MobaXterm
http://mobaxterm.mobatek.net/

It includes a terminal from which you ssh to the remote, with automagic X
forwarding, as well as a file exchange interface.

ZP

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users


mache at creeger

Sep 22, 2011, 11:02 AM

Post #20 of 21 (1849 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

At 07:05 AM 9/21/2011, Mache Creeger wrote:
>Any ideas? Can folks running Headless Fedora 15 MBEs who want to use
>the GUI over vnc post their xorg.conf files?
>
>-- Mache
>
>At 10:08 AM 9/20/2011, Mache Creeger wrote:
>>I recently upgraded my MBE/FE combo to Fedora 15 and am having
>>problems running it headless. While it normally lives in my garage,
>>I have the mythtv account autologin and gain access to the FE and
>>desktop through VNC not to run video but to do various housekeeping
>>tasks on the GUI. I have tried various xorg.conf configurations
>>andeither X will not load because it cannot find the right edid or
>>when I can get X and Gnome to load and mythtv auto logs in, I get
>>an error on the mythtv desktop that states "could not apply the
>>stored configuration for monitors", "none of the selected modes
>>were compatible with possible modes: CRTC 354: Trying mode..." and
>>then a bunch of resolutions in the 50 to 57 Mhz range. The error
>>messages interferes with my launching and running mythfrontend on
>>the Gnome desktop. Listed below is my most recent
>>/etc/X11/xorg.conf attempt with some of the last lines of
>>/var/log/Xorg.0.log. Any ideas would be most appreciated.
>>
>>-- Mache

Always entertaining to see how far afield the thread can go from my
original question. However, I was able to solve the mystery of
running a Fedora 15 server without a monitor, keyboard, and mouse,
that booted X and the Gnome GUI, autolog'ed into the mythtv userid,
and presented a clean desktop accessible to a TightVNC client running
over putty/ssh on Windows 7.

1. Used the following in the Device section of /etc/X11/xorg.conf

Section "Device"
Identifier "Device0"
Driver "nvidia"
Option "UseEDID" "FALSE"
Option "UseDisplayDevice" "CRT-1"
Option "ConnectedMonitor" "CRT-1"
Option "IgnoreEDID" "TRUE"
Option "UseEDIDFreqs" "FALSE"
Option "UseEDIDDPi" "FALSE"
Option "ModeValidation" "NoEdidModes"
VendorName "NVIDIA Corporation"
EndSection

2. Changed the name of the following file in the autolog'ed in user
area (in my case /home/mythtv)

# mv ~/.config/monitors.xml ~/.config/monitors.xml-original

3. Used the Gnome account settings feature to autologin on boot to my
specified userid.

Hope helps others with the same issue.

-- Mache


umproko5 at gmail

Oct 1, 2011, 6:39 AM

Post #21 of 21 (1747 views)
Permalink
Re: Problems Running Headless MBE/FE with Fedora 15/Gnome 3 [In reply to]

On 09/20/2011 12:08 PM, Mache Creeger wrote:
> I recently upgraded my MBE/FE combo to Fedora 15 and am having
> problems running it headless. While it normally lives in my garage, I
> have the mythtv account autologin and gain access to the FE and
> desktop through VNC not to run video but to do various housekeeping
> tasks on the GUI. I have tried various xorg.conf configurations and
> either X will not load because it cannot find the right edid or when
> I can get X and Gnome to load and mythtv auto logs in, I get an error
> on the mythtv desktop that states "could not apply the stored
> configuration for monitors", "none of the selected modes were
> compatible with possible modes: CRTC 354: Trying mode..." and then a
> bunch of resolutions in the 50 to 57 Mhz range. The error messages
> interferes with my launching and running mythfrontend on the Gnome
> desktop. Listed below is my most recent /etc/X11/xorg.conf attempt
> with some of the last lines of /var/log/Xorg.0.log. Any ideas would
> be most appreciated.
>
> -- Mache
>
> # uname -r
> 2.6.40.4-5.fc15.x86_64
>
> # rpm -qa | grep mythtv-backend
> mythtv-backend-0.24.1-277.fc15.x86_64
>
> # cat /etc/X11/xorg.conf
>
> # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> # nvidia-xconfig: version
> 280.13 (buildmeister [at] swio-display-x86-rhel47-03) Wed Jul
> 27 17:15:58 PDT 2011
>
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
> EndSection
>
> Section "Files"
> ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
> ModulePath "/usr/lib64/xorg/modules/extensions"
> ModulePath "/usr/lib64/xorg/modules"
> FontPath "/usr/share/fonts/default/Type1"
> EndSection
>
> Section "InputDevice"
>
> # generated from default
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
>
> # generated from data in "/etc/sysconfig/keyboard"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbLayout" "us"
> Option "XkbModel" "pc105"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "Unknown"
> # HorizSync 28.0 - 33.0
> # VertRefresh 43.0 - 72.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> Option "UseEDID" "FALSE"
> Option "UseDisplayDevice" "CRT"
> VendorName "NVIDIA Corporation"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Device0"
> Monitor "Monitor0"
> Option "NoLogo" "True"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
> ; Last few entries to /var/log/Xorg.0.log
>
> [ 22.215] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
> [ 22.215] (II) Loading /usr/lib64/xorg/modules/libwfb.so
> [ 22.215] (II) Loading /usr/lib64/xorg/modules/libfb.so
> [ 22.226] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
> [ 22.226] (==) NVIDIA(0): RGB weight 888
> [ 22.226] (==) NVIDIA(0): Default visual is TrueColor
> [ 22.226] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 22.226] (**) NVIDIA(0): Option "NoLogo" "True"
> [ 22.226] (**) NVIDIA(0): Option "UseEDID" "FALSE"
> [ 22.226] (**) NVIDIA(0): Option "UseDisplayDevice" "CRT"
> [ 22.226] (**) NVIDIA(0): Ignoring EDIDs
> [ 22.941] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
> [ 22.942] (II) NVIDIA(0): NVIDIA GPU GeForce 8400GS (GT218) at
> PCI:1:0:0 (GPU-0)
> [ 22.942] (--) NVIDIA(0): Memory: 1048576 kBytes
> [ 22.942] (--) NVIDIA(0): VideoBIOS: 70.18.76.00.02
> [ 22.943] (II) NVIDIA(0): Detected PCI Express Link width: 16X
> [ 22.943] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> [ 22.943] (--) NVIDIA(0): Connected display device(s) on GeForce
> 8400GS at PCI:1:0:0
> [ 22.943] (--) NVIDIA(0): CRT-1
> [ 22.943] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
> [ 22.946] (II) NVIDIA(0): Option "UseDisplayDevice" "CRT"
> converted to "CRT-1".
> [ 22.946] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from
> the EDID has been
> [ 22.946] (**) NVIDIA(0): enabled on all display devices.
> [ 22.949] (II) NVIDIA(0): Assigned Display Device: CRT-1
> [ 22.949] (==) NVIDIA(0):
> [ 22.949] (==) NVIDIA(0): No modes were requested; the default
> mode "nvidia-auto-select"
> [ 22.949] (==) NVIDIA(0): will be used as the requested mode.
> [ 22.949] (==) NVIDIA(0):
> [ 22.949] (II) NVIDIA(0): Validated modes:
> [ 22.949] (II) NVIDIA(0): "nvidia-auto-select"
> [ 22.949] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
> [ 22.970] (WW) NVIDIA(0): Unable to get display device CRT-1's
> EDID; cannot compute DPI
> [ 22.970] (WW) NVIDIA(0): from CRT-1's EDID.
> [ 22.970] (==) NVIDIA(0): DPI set to (75, 75); computed from
> built-in default
> [ 22.970] (--) Depth 24 pixmap format is 32 bpp
> [ 22.970] (II) NVIDIA: Using 768.00 MB of virtual memory for
> indirect memory access.
> [ 22.975] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
> [ 22.997] (II) Loading extension NV-GLX
> [ 23.038] (==) NVIDIA(0): Disabling shared memory pixmaps
> [ 23.038] (==) NVIDIA(0): Backing store disabled
> [ 23.038] (==) NVIDIA(0): Silken mouse enabled
> [ 23.039] (**) NVIDIA(0): DPMS enabled
> [ 23.039] (II) Loading extension NV-CONTROL
> [ 23.039] (II) Loading extension XINERAMA
> [ 23.039] (II) Loading sub module "dri2"
> [ 23.039] (II) LoadModule: "dri2"
> [ 23.040] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
> [ 23.040] (II) Module dri2: vendor="X.Org Foundation"
> [ 23.040] compiled for 1.10.4, module version = 1.2.0
> [ 23.040] ABI class: X.Org Server Extension, version 5.0
> [ 23.040] (II) NVIDIA(0): [DRI2] Setup complete
> [ 23.040] (==) RandR enabled
> [ 23.040] (II) Initializing built-in extension Generic Event Extension
> [ 23.040] (II) Initializing built-in extension SHAPE
> [ 23.040] (II) Initializing built-in extension MIT-SHM
> [ 23.040] (II) Initializing built-in extension XInputExtension
> [ 23.040] (II) Initializing built-in extension XTEST
> [ 23.040] (II) Initializing built-in extension BIG-REQUESTS
> [ 23.040] (II) Initializing built-in extension SYNC
> [ 23.040] (II) Initializing built-in extension XKEYBOARD
> [ 23.040] (II) Initializing built-in extension XC-MISC
> [ 23.040] (II) Initializing built-in extension XINERAMA
> [ 23.040] (II) Initializing built-in extension XFIXES
> [ 23.040] (II) Initializing built-in extension RENDER
> [ 23.040] (II) Initializing built-in extension RANDR
> [ 23.040] (II) Initializing built-in extension COMPOSITE
> [ 23.040] (II) Initializing built-in extension DAMAGE
> [ 23.040] (II) SELinux: Disabled on system
> [ 23.041] (II) Initializing extension GLX
> [ 23.458] (II) config/udev: Adding input device Power Button
> (/dev/input/event1)
> [ 23.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 23.458] (**) Power Button: Applying InputClass "system-setup-keyboard"
> [ 23.458] (II) LoadModule: "evdev"
> [ 23.459] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.488] (II) Module evdev: vendor="X.Org Foundation"
> [ 23.489] compiled for 1.10.1, module version = 2.6.0
> [ 23.489] Module class: X.Org XInput Driver
> [ 23.489] ABI class: X.Org XInput driver, version 12.2
> [ 23.489] (II) Using input driver 'evdev' for 'Power Button'
> [ 23.489] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.489] (**) Power Button: always reports core events
> [ 23.489] (**) Power Button: Device: "/dev/input/event1"
> [ 23.489] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 23.489] (--) Power Button: Found keys
> [ 23.489] (II) Power Button: Configuring as keyboard
> [ 23.489] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
> [ 23.489] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
> [ 23.489] (**) Option "xkb_rules" "evdev"
> [ 23.489] (**) Option "xkb_model" "pc105+inet"
> [ 23.489] (**) Option "xkb_layout" "us"
> [ 23.489] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
> [ 23.523] (II) config/udev: Adding input device Power Button
> (/dev/input/event0)
> [ 23.523] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 23.523] (**) Power Button: Applying InputClass "system-setup-keyboard"
> [ 23.523] (II) Using input driver 'evdev' for 'Power Button'
> [ 23.523] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.523] (**) Power Button: always reports core events
> [ 23.523] (**) Power Button: Device: "/dev/input/event0"
> [ 23.523] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 23.523] (--) Power Button: Found keys
> [ 23.523] (II) Power Button: Configuring as keyboard
> [ 23.523] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
> [ 23.523] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
> [ 23.523] (**) Option "xkb_rules" "evdev"
> [ 23.523] (**) Option "xkb_model" "pc105+inet"
> [ 23.523] (**) Option "xkb_layout" "us"
> [ 23.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event4)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event5)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event6)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event7)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.534] (II) config/udev: Adding input device AT Translated Set
> 2 keyboard (/dev/input/event2)
> [ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
> "evdev keyboard catchall"
> [ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
> "system-setup-keyboard"
> [ 23.534] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
> [ 23.534] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.534] (**) AT Translated Set 2 keyboard: always reports core events
> [ 23.534] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
> [ 23.534] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
> [ 23.534] (--) AT Translated Set 2 keyboard: Found keys
> [ 23.534] (II) AT Translated Set 2 keyboard: Configuring as keyboard
> [ 23.534] (**) Option "config_info"
> "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
> [ 23.534] (II) XINPUT: Adding extended input device "AT Translated
> Set 2 keyboard" (type: KEYBOARD)
> [ 23.534] (**) Option "xkb_rules" "evdev"
> [ 23.534] (**) Option "xkb_model" "pc105+inet"
> [ 23.534] (**) Option "xkb_layout" "us"
> [ 23.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
> [ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
> Wheel Mouse (/dev/input/event3)
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass
> "evdev pointer catchall"
> [ 23.535] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
> [ 23.535] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: always reports core events
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
> [ 23.535] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
> [ 23.535] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
> [ 23.535] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 23.535] (**) Option "config_info"
> "udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
> [ 23.535] (II) XINPUT: Adding extended input device "ImPS/2
> Generic Wheel Mouse" (type: MOUSE)
> [ 23.535] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping
> acceleration scheme 1
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration
> factor: 2.000
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
> [ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
> Wheel Mouse (/dev/input/mouse0)
> [ 23.535] (II) No input driver/identifier specified (ignoring)
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://www.mythtv.org/mailman/listinfo/mythtv-users
Hi,
Are you saying Gnome isn't starting hence not able to autologin?

/Jason

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://www.mythtv.org/mailman/listinfo/mythtv-users

MythTV users RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.