mariano.kamp at web
Nov 9, 2003, 5:16 AM
Post #4 of 4
(1101 views)
Permalink
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Friday 07 November 2003 20:11, Joseph A. Caputo wrote:
> Top posting rearranged.
>
> On Friday 07 November 2003 13:13, Mariano Kamp wrote:
> > On Thursday 06 November 2003 23:27, Mariano Kamp wrote:
> > > Hi,
> > >
> > > I have mythv-* installed on two boxes:
> > >
> > > Rock:
> > > - cheap bttv grabber card (xawtv)
> > > - all mythtv components (0.11-6 from unstable) including mysql
> > > - no x-server (actually there is not even a console attached)
> > > purpose: record and serve
> > >
> > > Black:
> > > - no grabber card
> > > - mythv-frontend (and everything what it depends on according to
> > > the .deb) purpose: view recorded stuff, manage mythtv
> > >
> > > When opening an X-Session from black to rock I am able to run
> > > xawtv -remote and can watch tv and switch channels. I also ran
> > > scantv and it stored all the right channels. I can't listen to it,
> > > but I guess that's fine as it is remote. It shouldn't affect the
> > > recording, should it?
> > >
> > > With mythv I don't know how tod configure the channels. I am
> > > positive that I specified the right device /dev/video0. At least
> > > that is the one xawtv is using as nextview EPG is. I selected
> > > german/austrian as region.
> > >
> > > I believe I read on mythtv.org that the upstream for xmltv is
> > > broken. At least I am sure that this was where I found the link for
> > > nextview EPG. Anyway I am not able to find it anymore and also
> > > haven't figured out how to tell mythtv about nextview epg. I found
> > > how to export the xml file in nextview epg, but don't know where to
> > > put it.
> > >
> > > The next problem might be due to the a.m. problems, still I want
> > > to voice it. When running mythv and try to watch (on rock or black)
> > > I just get a black screen and nothing is happening. Do I have to
> > > switch channels? How? I haven't found how to stop it, but by ctrl-c
> > > on the console. Any ideas? Btw. syslog is empty and the mythtv log
> > > just confirms that there was an attempt to connect and that it was
> > > successful.
> > >
> > > The picture quality is pretty bad (with xawtv), but I guess that
> > > is due to the fact, that it is just PAL, isn't it? It is way worse
> > > then divx or something similar. Just wondering?!
> > >
> > > Is there a new debian package with 0.12 in the makings? Will it
> > > find its way into the official distribution.
> > >
> > > Will nextview epg be tighter integrated in 0.13?
> > >
> > > All in all, I am quite impressed what I've seen. Very good job. I
> > > am looking forward to use it.
> > >
> > > Cheers,
> > > Mariano
> >
> > Hi,
> >
> > any hints what I can check for?
> >
> > I also tried to import the xml output from nxtvepg with
> > mythfilldatabase --file VideoSourceName -1 /program.xml
> >
> > It took a couple of minutes but returned with "0 replacements
> > made".
> >
> > I also ran
> >
> > mythfilldatabase --xawchannels VideoSourceName ~/.xawtv
> >
> > Again I got 0 replacements made.
> >
> > I ran
> > mythfilldatabase --xawchannels VideoSourceName ~/.xawtv
> > and was prompted for loads of channels with pre-set values, which I
> > didn't change.
> >
> >
> > mythfilldatabase --file VideoSourceName 3 /program.xml
> > returned once more "0 replacements", but also gave me loads of errors
> > for duplicate entries.
> >
> > When firing up mythtv I get the following:
> > Xlib: extension "GLX" missing on display "localhost:14.0"
> > Xlib: extension "GLX" missing on display "localhost:14.0"
> > connecting to backend server: 192.168.0.1:6543
> >
> > But that's about it. No x-window is launched.
> >
> > All that was on rock (see quoted posting).
> >
> > When launching mythtv from black I just get the messag e that it is
> > connected and then nothing happens.
> > When launching mythtv-frontend I see an x-window and when selecting
> > Tv/ Schedule Recordings/Program Finder it seems to work. At least I
> > am able to define recordings (the rectangle in the upper right corner
> > stays black though?).
> > When selecting Tv/Schedule Recordins/Program Guide it hangs.
> > Same for instant recordings.
> > In case of TV/Watch .. I just get a black screen and no key (apparent
> > to me) gets me back, but pressing CTRL-C at the command line.
> >
> > Cheers,
> > Mariano
>
> First of all, you don't run 'mythtv'. You run 'mythfrontend'. Until
> you get your mythfilldatabase issues solved, your Program Guide and
> Watch TV functions will not work, because you have no channels defined
> in your database, or possibly because you didn't complete the backend
> setup program properly (you must go through all 4 main setup sections
> in order, and make sure you bind your video source to an input!)
Thanks for responding.
How do I know if I have the mythfilldatabase issue solved? I can see the
actual program data when selection Tv/Schedule Recordings/Program Finder.
I am just concerned that it **always** says 0 replacements, which might be
fine.
I did complete all 4 steps of the setup program.
Thanx for letting me know about not running mythtv directly. Still
mythfrontend doesn't work as expected too (see above).
Cheers,
Mariano
- --
Get public key from
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xE4AC1483
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQE/rjAeSraqt+SsFIMRAu1FAJ9Kmy4N4hzt9CQXG2/gwynIWoaj4wCcDe5H
VVEUJfa+yUtU/JLQ9LHY29g=
=xq1n
-----END PGP SIGNATURE-----
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
|
