Mailing List Archive: MythTV: Users

Strange VDPAU error

Index | Next | Previous | View Threaded

paulin at spextreme

Feb 15, 2009, 7:35 PM

Post #1 of 9 (2725 views)
Permalink

Strange VDPAU error

Well tonight something strange started happening with myth playback.

The frontend during playback of two differnt shows stopped in the middle and
showed the Recordings display with the error "Serious error during playback"
Or something close to that.

Going back and playing it seems to allow it to play fine. On the first show
it happend about 45 minutes in. The second show it happened about 5 minutes
in.

The log show the following

2009-02-15 22:25:44.397 VDPAU Error: DISPLAY PRE-EMPTED. Aborting playback.
2009-02-15 22:25:44.398 VDPAU Error: Error at util-vdpau.cpp:1124 (#2, The
display was pre-empted, or a fatal error occurred.)
2009-02-15 22:25:44.398 VDPAU Error: Error at util-vdpau.cpp:1208 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.398 NVP: Error condition detected in videoOutput after
Show(), aborting playback.
2009-02-15 22:25:44.398 VideoOutputXv Error: IsErrored() in ProcessFrame()
2009-02-15 22:25:44.398 NVP(1), Error: AVSync: Unknown error in videoOutput,
aborting playback.
2009-02-15 22:25:44.398 NVP(1), Error: Failed to initialize A/V Sync
2009-02-15 22:25:44.398 VideoOutputXv Error: IsErrored() in ProcessFrame()
2009-02-15 22:25:44.399 NVP(1), Error: AVSync: Unknown error in videoOutput,
aborting playback.
2009-02-15 22:25:44.399 NVP(1), Error: Failed to initialize A/V Sync
2009-02-15 22:25:44.399 VideoOutputXv Error: IsErrored() in ProcessFrame()
2009-02-15 22:25:44.398 NVP(1): Exited decoder loop.
2009-02-15 22:25:44.399 NVP(1), Error: AVSync: Unknown error in videoOutput,
aborting playback.
2009-02-15 22:25:44.399 NVP(1), Error: Failed to initialize A/V Sync
2009-02-15 22:25:44.399 VideoOutputXv: dtor
2009-02-15 22:25:44.399 VideoOutputXv: DiscardFrames(1)
2009-02-15 22:25:44.399 VideoBuffers::DiscardFrames(1): LAUUUUUUAAUUUUUuA
2009-02-15 22:25:44.399 VideoBuffers::DiscardFrames(): AAAAAAAAAAAAAAAAA --
done()
2009-02-15 22:25:44.399 VideoBuffers::DiscardFrames(1): AAAAAAAAAAAAAAAAA --
done
2009-02-15 22:25:44.399 VideoOutputXv: DiscardFrames() 3: AAAAAAAAAAAAAAAAA
-- done()
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:793 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.399 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:804 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:893 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:893 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:893 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:893 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:574 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.400 VDPAU Error: Error at util-vdpau.cpp:582 (#3, An
invalid handle value was provided.)
2009-02-15 22:25:44.523 TV: HandleStateChange(0) -- begin
2009-02-15 22:25:44.523 TV: Attempting to change from WatchingPreRecorded to
None
2009-02-15 22:25:44.523 TV: StopStuff() for player ctx 0 -- begin
2009-02-15 22:25:44.523 TV: SetActive(0,w/o OSD) 0 -> 0 -- begin
2009-02-15 22:25:44.523 TV: SetActive(0,w/o OSD) 0 -> 0 -- end
2009-02-15 22:25:44.523 TV: StopStuff(): stopping ring buffer
2009-02-15 22:25:44.546 TV: StopStuff(): stopping player
2009-02-15 22:25:44.546 TV: StopStuff() -- end
2009-02-15 22:25:44.546 TV: Changing from WatchingPreRecorded to None
2009-02-15 22:25:44.546 TV: HandleStateChange(0) -- end
2009-02-15 22:25:44.567 ScreenSaverX11Private: DPMS Reactivated 1
2009-02-15 22:25:44.567 ScreenSaverX11Private: StopTimer
2009-02-15 22:25:44.567 TV: HandleStateChange(0) -- begin
2009-02-15 22:25:44.567 TV: Attempting to change from None to None
2009-02-15 22:25:44.567 TV: HandleStateChange(0) -- end
2009-02-15 22:25:44.567 TV: StartTV -- process events end
2009-02-15 22:25:44.567 TV: tv->Playback() -- begin
2009-02-15 22:25:44.573 TV: tv->Playback() -- end
2009-02-15 22:25:44.573 TV: StartTV -- process events begin
2009-02-15 22:25:44.593 TV: HandleStateChange(0) -- begin
2009-02-15 22:25:44.594 TV: Attempting to change from None to
WatchingPreRecorded
2009-02-15 22:25:44.596 RingBuf(/home/videos/1101_20090205220100.mpg):
OpenFile(/home/videos/1101_20090205220100.mpg, 12)
2009-02-15 22:25:44.639 RingBuf(/home/videos/1101_20090205220100.mpg):
CalcReadAheadThresh(0 KB)
-> threshhold(64 KB) min read(0 KB) blk size(32 KB)
2009-02-15 22:25:44.642 TV: StartPlayer(0, WatchingPreRecorded, main) --
begin
2009-02-15 22:25:44.642 playCtx, Error: Attempting to setup a player, but it
already exists.
2009-02-15 22:25:44.642 TV: StartPlayer(0, WatchingPreRecorded, main) -- end
error
2009-02-15 22:25:44.642 TV: HandleStateChange(0) -- end
2009-02-15 22:25:44.663 ScreenSaverX11Private: DPMS Deactivated 1
2009-02-15 22:25:44.663 ScreenSaverX11Private: ResetTimer -- begin
2009-02-15 22:25:44.663 ScreenSaverX11Private: StopTimer
2009-02-15 22:25:44.663 ScreenSaverX11Private: StartTimer
2009-02-15 22:25:44.663 ScreenSaverX11Private: ResetTimer -- end
2009-02-15 22:25:49.591 TV: StartTV -- process events end
2009-02-15 22:25:49.591 TV: StartTV -- process events 2 begin
2009-02-15 22:25:49.591 TV: StartTV -- process events 2 end
2009-02-15 22:25:49.591 TV::~TV() -- begin
2009-02-15 22:25:49.591 TV::~TV() -- lock
2009-02-15 22:25:49.592 TV: StopStuff() for player ctx 0 -- begin
2009-02-15 22:25:49.592 TV: SetActive(0,w/o OSD) 0 -> 0 -- begin
2009-02-15 22:25:49.592 TV: SetActive(0,w/o OSD) 0 -> 0 -- end
2009-02-15 22:25:49.592 TV: StopStuff(): stopping ring buffer
2009-02-15 22:25:49.592 TV: StopStuff(): stopping player
2009-02-15 22:25:49.592 TV: StopStuff(): stopping recorder
2009-02-15 22:25:49.592 TV: StopStuff() -- end
2009-02-15 22:25:49.612 TV::~TV() -- end
2009-02-15 22:25:49.830 TV: StartTV -- end

So is this
1. A problem with my configuration or build (using trunk 19992)
2. A known issue with VDPAU or should I report one
3. A known issue with myth VDPAU support or should I report one

Any other thoughts.

steve

mark.kendall at gmail

Feb 16, 2009, 6:24 AM

Post #2 of 9 (2638 views)
Permalink

Re: Strange VDPAU error [In reply to]

2009/2/16 Paulin <paulin [at] spextreme>:
> Well tonight something strange started happening with myth playback.
>
> The frontend during playback of two differnt shows stopped in the middle and
> showed the Recordings display with the error "Serious error during playback"
> Or something close to that.

> The log show the following
>
> 2009-02-15 22:25:44.397 VDPAU Error: DISPLAY PRE-EMPTED. Aborting playback.
> 2009-02-15 22:25:44.398 VDPAU Error: Error at util-vdpau.cpp:1124 (#2, The
> display was pre-empted, or a fatal error occurred.)

> So is this
> 1. A problem with my configuration or build (using trunk 19992)
> 2. A known issue with VDPAU or should I report one
> 3. A known issue with myth VDPAU support or should I report one

Realistically, it could any combination of your system setup, a VDPAU
bug or mythtv's implementation of VDPAU.

You can get more background on preemption from:-

ftp://download.nvidia.com/XFree86/vdpau/doxygen/html/group__display__preemption.html

Is there anything on your system that might be triggering it?

Given nvidia's description, I can't see it really being a mythtv issue
in the first place. What mythtv is missing at the moment, however, is
the ability to completely re-initialise vdpau when it does happen.
That will come - just not sure when.

Regards

Mark
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

pantslessape at gmail

Feb 17, 2009, 4:51 AM

Post #3 of 9 (2641 views)
Permalink

Re: Strange VDPAU error [In reply to]

On 2/15/2009 10:35 PM, Paulin wrote:
> Well tonight something strange started happening with myth playback.
>
> 2009-02-15 22:25:44.397 VDPAU Error: DISPLAY PRE-EMPTED. Aborting
> playback.
> 2009-02-15 22:25:44.398 VDPAU Error: Error at util-vdpau.cpp:1124 (#2,
> The display was pre-empted, or a fatal error occurred.)
> So is this
> 1. A problem with my configuration or build (using trunk 19992)
> 2. A known issue with VDPAU or should I report one
> 3. A known issue with myth VDPAU support or should I report one
>
> Any other thoughts.
>
> steve
This same thing started happening to me this weekend. Recently I have
been having problems starting HD shows, which could be fixed by going in
multiple times, going to an SD show first (which always works) or
sometimes I would have to restart X. After updating SVN this doesn't
seem to happen anymore, but now it dies during playing with the same
error that you are getting. Seems to be a fairly new problem. Wonder
what could be causing the preemption?

Lee

_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

spikeygg at gmail

May 16, 2009, 2:35 PM

Post #4 of 9 (2421 views)
Permalink

Re: Strange VDPAU error [In reply to]

On Tue, Feb 17, 2009 at 6:51 AM, Lee Koloszyc <pantslessape [at] gmail>wrote:

> On 2/15/2009 10:35 PM, Paulin wrote:
>
>> Well tonight something strange started happening with myth playback.
>>
>> 2009-02-15 22:25:44.397 VDPAU Error: DISPLAY PRE-EMPTED. Aborting
>> playback.
>> 2009-02-15 22:25:44.398 VDPAU Error: Error at util-vdpau.cpp:1124 (#2, The
>> display was pre-empted, or a fatal error occurred.)
>> So is this
>> 1. A problem with my configuration or build (using trunk 19992)
>> 2. A known issue with VDPAU or should I report one
>> 3. A known issue with myth VDPAU support or should I report one
>>
>> Any other thoughts.
>>
>> steve
>>
> This same thing started happening to me this weekend. Recently I have been
> having problems starting HD shows, which could be fixed by going in multiple
> times, going to an SD show first (which always works) or sometimes I would
> have to restart X. After updating SVN this doesn't seem to happen anymore,
> but now it dies during playing with the same error that you are getting.
> Seems to be a fairly new problem. Wonder what could be causing the
> preemption?
>
> Lee
>
>

I have had this happen on my trunk build of mythtv [20568], built it last
night. The caps on my old NVidia 6200LE gave up the ghost recently, I was
using ffmpeg which worked very well. Now that I purchased a 8400GS, I
wanted to check out the VDPAU. I'm having lots of problems with it.

1) Every once in a while when I execute mythfrontend, it brings up the
theme background then crashes back to the desktop with just a "segfault"
error. It'll crash like that twice in a row, then work. This may not be
VDPAU since I haven't even initiated video playback at this point, but it's
really weird and it did not do this with my 6200LE.
2) I have a studder problem when the OSD is up, lots of others have had this
issue. Apparently, it's a problem with any overlays because turning on the
closed captioning also makes the video unwatchable. I wonder if this is a
limitation of VDPAU, or is it something that might actually work someday. I
ask because we use closed captioning a lot. If it'll never be as good as
ffmpeg, I'll just toss this new 8400GS and get something else that can do
it.
3) Occasionally, selecting a recording will cause the frontend to crash
reporting seemly random errors (different error description every time).

-Greg

thecovert at gmail

Jul 13, 2009, 6:25 AM

Post #5 of 9 (2192 views)
Permalink

Re: Strange VDPAU error [In reply to]

On Mon, Feb 16, 2009 at 1:35 PM, Paulin<paulin [at] spextreme> wrote:

> 2009-02-15 22:25:44.397 VDPAU Error: DISPLAY PRE-EMPTED. Aborting playback.
> 2009-02-15 22:25:44.398 VDPAU Error: Error at util-vdpau.cpp:1124 (#2, The
> display was pre-empted, or a fatal error occurred.)

I recently had this same error with nvida 180 and a upgrade to 185
driver fixed the problem. I found this thread while searching for a
fix and am posting in the hope it will help someone else.
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

jyavenard at gmail

Jul 13, 2009, 6:30 AM

Post #6 of 9 (2195 views)
Permalink

Re: Strange VDPAU error [In reply to]

2009/7/13 covert covert <thecovert [at] gmail>:
> I recently had this same error with nvida 180 and a upgrade to 185
> driver fixed the problem. I found this thread while searching for a
> fix and am posting in the hope it will help someone else.

you'll be one of the very few for whom 185.xx helped...

Avoid those drivers, terrible, very unstable ... buggy openGL library
(segfault very often), complete hang of the PC in some situations
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

staffan.pettersson at gmail

Jul 15, 2009, 8:44 AM

Post #7 of 9 (2158 views)
Permalink

Re: Strange VDPAU error [In reply to]

I to are having the same problems. I am running trunk 20588 with
dvb-s2 patches for watching hd channels. vdpau has giving me a hard
time. It has been hard to figger out what is making my system crash
but i have narrowed down to vdpau nice deinterlacers! If i use
temporal or advance 2x my system either hardlocks (need to powercycle)
or while watching a video it says "recovered for video error".

I have now set up a playback profile that workes pretty well! i am now
using ffmpeg with yadif 2x for sd contents and vdpau with bob 2x for
hd material, Have been running this for 2 days now without a crash
:=). Sometimes it does exit to the main menu with "to many video
errors" but that seems to be rare.

I really hope someone has the time to update the s2api patches to
newer trunk :=)
My gtf card is a 8600gt 512 mb

Kind regards Staffan

2009/7/13 Jean-Yves Avenard <jyavenard [at] gmail>:
> 2009/7/13 covert covert <thecovert [at] gmail>:
>> I recently had this same error with nvida 180 and a upgrade to 185
>> driver fixed the problem. I found this thread while searching for a
>> fix and am posting in the hope it will help someone else.
>
> you'll be one of the very few for whom 185.xx helped...
>
> Avoid those drivers, terrible, very unstable ... buggy openGL library
> (segfault very often), complete hang of the PC in some situations
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
_______________________________________________
mythtv-users mailing list
mythtv-users [at] mythtv
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

paulin at spextreme

Nov 16, 2009, 7:48 PM

Post #8 of 9 (1702 views)
Permalink

Re: Strange VDPAU error [In reply to]

I'm bringing this back to life. I upgraded to 0.22 last week and tonight
was the first night we really watched a lot on it. I'm using the latest
Mythbuntu 9.10 release with all updates. I watched about 2 hours of shows.
About 1hr and 35 minutes in I got the serious error message and it exited
out of the program.

I thought I had read somewhere this was fixed in the latest driver/myth
release but I guess not. Anyone have any insight or thoughts.

Thanks,
steve

On Wed, Jul 15, 2009 at 10:44 AM, Staffan Pettersson <
staffan.pettersson [at] gmail> wrote:

> I to are having the same problems. I am running trunk 20588 with
> dvb-s2 patches for watching hd channels. vdpau has giving me a hard
> time. It has been hard to figger out what is making my system crash
> but i have narrowed down to vdpau nice deinterlacers! If i use
> temporal or advance 2x my system either hardlocks (need to powercycle)
> or while watching a video it says "recovered for video error".
>
> I have now set up a playback profile that workes pretty well! i am now
> using ffmpeg with yadif 2x for sd contents and vdpau with bob 2x for
> hd material, Have been running this for 2 days now without a crash
> :=). Sometimes it does exit to the main menu with "to many video
> errors" but that seems to be rare.
>
> I really hope someone has the time to update the s2api patches to
> newer trunk :=)
> My gtf card is a 8600gt 512 mb
>
> Kind regards Staffan
>
> 2009/7/13 Jean-Yves Avenard <jyavenard [at] gmail>:
> > 2009/7/13 covert covert <thecovert [at] gmail>:
> >> I recently had this same error with nvida 180 and a upgrade to 185
> >> driver fixed the problem. I found this thread while searching for a
> >> fix and am posting in the hope it will help someone else.
> >
> > you'll be one of the very few for whom 185.xx helped...
> >
> > Avoid those drivers, terrible, very unstable ... buggy openGL library
> > (segfault very often), complete hang of the PC in some situations
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users [at] mythtv
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> _______________________________________________
> mythtv-users mailing list
> mythtv-users [at] mythtv
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>

spikeygg at gmail

Nov 17, 2009, 5:52 AM

Post #9 of 9 (1681 views)
Permalink

Re: Strange VDPAU error [In reply to]

On Mon, Nov 16, 2009 at 8:48 PM, Paulin <paulin [at] spextreme> wrote:

> I'm bringing this back to life. I upgraded to 0.22 last week and tonight
> was the first night we really watched a lot on it. I'm using the latest
> Mythbuntu 9.10 release with all updates. I watched about 2 hours of shows.
> About 1hr and 35 minutes in I got the serious error message and it exited
> out of the program.
>
> I thought I had read somewhere this was fixed in the latest driver/myth
> release but I guess not. Anyone have any insight or thoughts.
>
> Thanks,
> steve
>

The issues I was having (segfaults during playback and initiating
playback) turned out to be a bad 8400GS card. I returned it and purchased a
9500GT and I'd never go back. I haven't had any VDPAU problems with my
9500GT card except for the OSD studder which is more of an annoyance. Could
be that you are overheating, does yours have an active cooling device on it?

-Greg

Index | Next | Previous | View Threaded

Interested in having your list archived? Contact Gossamer Threads