Razorblade at kabelbw
Jul 12, 2009, 10:10 PM
Post #4 of 4
(445 views)
Permalink
|
|
Re: No analogue sound when using HDMI input on Sony Bravia (OT)
[In reply to]
|
|
Hi,
as far as I know there's a setting for HDMI 1 sound output in the TV
settings, where you can tell the TV to use a different sound input for
HDMI 1.
If you don't change this setting the TV is expecting sound via HDMI.
Bjoern
On 07/13/2009 06:49 AM, Justin Smith wrote:
> Hi,
>
> I get no sound through the speakers of my Bravia KDL-40W5500 when using DVI
> -> HDMI 1 and PC analogue out -> analogue in on TV (3.5mm socket). Picture
> is fine (great, actually).
>
> Some notes:
> 1. According to the TV user manual, HDMI 1 is the port to use when you want
> to combine HDMI video with the analogue audio in socket.
> 2. The PC analogue audio out works fine (tested using PC speakers).
> 3. The TV analogue audio in works fine (I connected a laptop to the TV VGA
> input, switched TV input to PC, and I heard the MythTV audio fine).
>
> I suspect that the TV is expecting audio over HDMI, in spite of what the
> user manual says. The TV reports 1080p for the MythTV HDMI 1 input signal.
> Is there a difference, in HDMI terms, between "consumer" HDMI video format
> (e.g. from Blueray player) and PC HDMI video format, for 1920x1080[at]50, which
> is what I use?
>
> I realise this is probably a TV problem rather than a MythTV problem, but so
> far Sony has not been able to help me.
>
>
> Thanks for any help,
> Justin.
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users[at]mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
|
