cstepe at ctdataservices
Oct 5, 2006, 1:28 PM
Post #10 of 12
(2583 views)
Permalink
|
Ok, I removed the x264 requirement But it still fails on the make
complaining about x264 . I have all the latest updates for the devel
from atrpms so I don't understand why it will not build.
OUTPUT
[root [at] mythtvserve ffmpeg-0.4.9]# ./configure --prefix=/usr
--libdir=/usr/lib --shlibdir=/usr/lib --mandir=/usr/share/man
--enable-mp3lame --enable-libogg --enable-vorbis --enable-faadbin
--enable-xvid --enable-faac --enable-a52 --enable-a52bin --enable-dts
--enable-pp --enable-shared --enable-pthreads --enable-dc1394
--enable-gpl --disable-strip --extra-cflags="-O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386
-fasynchronous-unwind-tables"
install prefix /usr
source path /usr/src/redhat/SOURCES/ffmpeg-0.4.9
C compiler gcc
make make
CPU x86 (generic)
big-endian no
inttypes.h yes
broken inttypes.h no
MMX enabled yes
Vector Builtins yes
3DNow! Builtins yes
gprof enabled no
zlib enabled yes
libgsm enabled no
mp3lame enabled yes
libogg enabled yes
Vorbis enabled yes
FAAD enabled no
faadbin enabled yes
FAAC enabled yes
XviD enabled yes
x264 enabled no
a52 support yes
a52 dlopened yes
DTS support yes
pp support yes
Software Scaler enabled no
AVISynth enabled no
debug symbols yes
strip symbols no
optimize yes
static yes
shared yes
video hooking yes
SDL support yes
Imlib2 support yes
FreeType support yes
Sun medialib support no
pthreads support yes
AMR-NB float support no
AMR-NB fixed support no
AMR-WB float support no
AMR-WB IF2 support no
network support yes
IPv6 support yes
.align is power-of-two no
License: GPL
Creating config.mak and config.h...
[root [at] mythtvserve ffmpeg-0.4.9]# make
make -C libavutil all
make[1]: Entering directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil'
make -C libavcodec all
make[1]: Entering directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavcodec'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavcodec'
make -C libavformat all
make[1]: Entering directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavformat'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavformat'
make -C libpostproc all
make[1]: Entering directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libpostproc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libpostproc'
gcc -L./libavformat -L./libavcodec -L./libavutil -Wl,--warn-common
-pthread -rdynamic -export-dynamic -Wl,--as-needed
-Wl,-rpath-link,/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavcodec
-Wl,-rpath-link,/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavformat
-Wl,-rpath-link,/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil -g -o
ffmpeg_g ffmpeg.o cmdutils.o -lavformat -lavcodec -lavutil -lm -lz -ldts
-lmp3lame -lvorbis -lvorbisenc -logg -logg -lxvidcore -ldc1394_control
-lraw1394 -lfaac -ldl
./libavcodec/libavcodec.so: undefined reference to `x264_encoder'
collect2: ld returned 1 exit status
make: *** [ffmpeg_g] Error 1
[root [at] mythtvserve ffmpeg-0.4.9]#
chris
On Thu, 2006-10-05 at 10:20, mythtv-users-request [at] mythtv wrote:
> Send mythtv-users mailing list submissions to
> mythtv-users [at] mythtv
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> or, via email, send a message with subject or body 'help' to
> mythtv-users-request [at] mythtv
>
> You can reach the person managing the list at
> mythtv-users-owner [at] mythtv
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of mythtv-users digest..."
>
> ______________________________________________________________________
> Today's Topics:
>
> 1. Re: myth2ipod install help (Chris Tepe)
> 2. Re: Xbox frontend and 0.20 (Phill Edwards)
> 3. Re: GeForce 6150, SPDIF, digital passthru - Success! (Jason)
> 4. Re: OT: PCI slots: 64 bit slots on Dell PowerEdge (James Pifer)
> 5. Re: myth2ipod install help (Walter Hofstetter)
> 6. have livetv but recording doesn't work (Timothy Waters)
> 7. Re: Xbox frontend and 0.20 (Alexander Fisher)
> 8. Re: 1080i HD without XvMC, how much horsepower? (Steven Adeff)
> 9. Re: visit from googlebot (Jacob Steenhagen)
> 10. Re: [mythtv] what does "DVBRec(1): PID 0x840 discontinuity
> detected" mean? (Daniel Kristjansson)
> 11. Re: DVB-T Channel Scanning (Alessandro Corbelli)
> 12. Re: Backup DB for recordings... (A JM)
> 13. Re: Wishlist feature for adding a hard drive (Steve Daniels)
> 14. Re: Protocol mismatch problem and ongoing GUIcolours problem
> (Steve Daniels)
> 15. Re: [mythtv] what does "DVBRec(1): PID 0x840 discontinuity
> detected" mean? (Janne Grunau)
> 16. Re: Ati Radeon 7000 vs. nVidia FX 5500 (Dan Wilga)
> 17. Re: backend crash - how to diagnose? (Axel Thimm)
> 18. Re: GeForce 6150, SPDIF, digital passthru - Success! (Nick)
> 19. Re: [mythtv] what does "DVBRec(1): PID 0x840 discontinuity
> detected" mean? (Daniel Kristjansson)
> 20. Re: DVB-T Channel Scanning (Lauri Tischler)
> 21. Re: DVB-T Channel Scanning (Lauri Tischler)
> 22. Re: Ati Radeon 7000 vs. nVidia FX 5500 (Nick)
> 23. Wishlist feature: OSD disappears after a few seconds when in
> pause mode (Nick)
> 24. backend hardware recommendations (Yan Seiner)
> 25. backend hardware recommendations (Yan Seiner)
> 26. Re: No sound on one DVD (Dag Nygren)
> 27. Re: Wishlist feature: OSD disappears after a few seconds when
> in pause mode (aaron)
> 28. IRW responds to remote, but not MythFrontend (White Joe)
>
> ______________________________________________________________________
> From: Chris Tepe <cstepe [at] ctdataservices>
> To: mythtv-users [at] mythtv
> Subject: Re: [mythtv-users] myth2ipod install help
> Date: Thu, 05 Oct 2006 08:12:13 -0400
>
> Thanks, I was getting confused between devel an source. Once I
download
> the source it was where you stated. I couldn't get it to configure
until
> I downloaded all the necessary devel RPMs. The config script runs but
it
> fails during make complaining about x264.
>
> Here is my config command
> ./configure --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib
> --mandir=/usr/share/man --enable-mp3lame --enable-libogg
--enable-vorbis
> --enable-faadbin --enable-xvid --enable-x264 --enable-a52
> --enable-a52bin --enable-dts --enable-pp --enable-shared
> --enable-pthreads --enable-dc1394 --enable-faac --enable-gpl
> --disable-strip --extra-cflags="-O2 -g -pipe -Wall
> -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386
> -fasynchronous-unwind-tables"
>
> Config runs fine.
>
> Here is the result of make
>
> [root [at] mythtvserve ffmpeg-0.4.9]# make
> make -C libavutil all
> make[1]: Entering directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil'
> make -C libavcodec all
> make[1]: Entering directory
> `/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavcodec'
> gcc -DHAVE_AV_CONFIG_H -I..
> -I/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil -O2 -g -pipe -Wall
> -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386
> -fasynchronous-unwind-tables -pthread -g -Wdeclaration-after-statement
> -Wall -Wno-switch -Wdisabled-optimization -Wpointer-arith
> -Wredundant-decls -Winline -O3 -D_FILE_OFFSET_BITS=64
> -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -c -o x264.o x264.c
> In file included from
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:195:1:
> warning: "sprintf" redefined
> In file included from /usr/include/stdio.h:834,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:36,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/include/bits/stdio2.h:30:1: warning: this is the location of the
> previous definition
> In file included from
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:196:1:
> warning: "strcat" redefined
> In file included from /usr/include/string.h:422,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:37,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/include/bits/string3.h:147:1: warning: this is the location of
the
> previous definition
> In file included from
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:198:1:
> warning: "printf" redefined
> In file included from /usr/include/stdio.h:834,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:36,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/include/bits/stdio2.h:65:1: warning: this is the location of the
> previous definition
> In file included from
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:199:1:
> warning: "fprintf" redefined
> In file included from /usr/include/stdio.h:834,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:36,
> from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> from avcodec.h:32,
> from x264.c:20:
> /usr/include/bits/stdio2.h:67:1: warning: this is the location of the
> previous definition
> x264.c: In function ‘X264_init’:
> x264.c:146: error: ‘struct <anonymous>’ has no member named
> ‘i_rc_method’
> x264.c:146: error: ‘X264_RC_CRF’ undeclared (first use in this
function)
> x264.c:146: error: (Each undeclared identifier is reported only once
> x264.c:146: error: for each function it appears in.)
> x264.c:149: error: ‘struct <anonymous>’ has no member named
> ‘i_rc_method’
> x264.c:149: error: ‘X264_RC_CQP’ undeclared (first use in this
function)
> x264.c:156: error: ‘struct <anonymous>’ has no member named
> ‘i_rc_method’
> x264.c:156: error: ‘X264_RC_ABR’ undeclared (first use in this
function)
> make[1]: *** [x264.o] Error 1
> make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavcodec'
> make: *** [lib] Error 2
>
>
> I went to http://atrpms.net/dist/fc5/ffmpeg and downloaded
> ffmpeg-0.4.9-17_r6524.at.src.rpm
> <http://dl.atrpms.net/all/ffmpeg-0.4.9-17_r6524.at.src.rpm>, installed
> (rpm -iv rpmfile).
> After that the source tar will be in /usr/src/redhat/SOURCES.
>
> -Walter
>
>
> Chris Tepe wrote:
> > I don't know what I'm doing wrong but I can't find where it is going
> > on my system. I used the command yum install ffmpeg-devel. It
> > completed successfully but I can't ind where it went.
> >
> >
> > Chris,
> >
> > You should find the source in /usr/src/redhat/SOURCES.
> > I used the configuration from my installed ffmpeg (ffmpeg -version)
> > will print the config/compiler options.
> > In my case I had to add the --enable-aac parameter for the ipod
audio
> > codec.
> >
> > However I'm still not able to convert recordings through myth2ipd.
> > I'm still ending up with a SIGFPE :-(
> >
> > From the ATrpms-users list I got a suggestion to remove the "-ac 0
-ar
> > 0" statement which is always present when checking how ffmpeg is
> > called form nuvexport. So I meesed with the scripts from nuvexprt
and
> > the SIGFPE went away, but the audio from the mp4 output is out of
> > sync....
> >
> > -Walter
> >
> > Chris Tepe wrote:
> >> Walter,
> >>
> >> I've pulled the ffmpeg source from atrpms and it installed, But I
> >> cann't find where it installed to so I can configure and build it.
> >> What was the configuration used to build it?
> >>
> >> Chris
> >>
> >> >
> >> > Chris,
> >> >
> >> > I'm currently struggling as well with the myth2ipod script.
> >> > I took the source-rpm of ffmpeg from atrpms and recompiled ffmpeg
to
> >> > assure the aac (codec) is enabled.
> >> >
> >> > I found that I can convert mpeg2 videos to mp4 (ipod) when
starting
> >> > ffmpeg mnually.
> >> > (In the meantime, Axel (atrpms) was very helpful and updated the
> >> ffmpeg
> >> > package on atrpms with the using the source).
> >> >
> >> > I tried to nail down my problem when starting "nuvexport -debug".
> >> > (nuvexport is called form myth2ipod).
> >> > In the debug mode nuvexport provides a list commands executed, so
you
> >> > just do the conversion step by step, using two shells.
> >> > In my case the error was caused by a SIGFPE (floating point
error),
> >> > casued by ffmpeg.....
> >> >
> >> > I'll investigate a bit further to check if this has to do with
the
> >> fifos
> >> > created by nuvexport.
> >> >
> >> > I'm not sure how to get a hold of people coding nuvexport, but
I'll
> >> also
> >> > post this behavior on the ffmpeg-devel list, because on the end
ffmgeg
> >> > falls over the FPE issue...
> >> >
> >> > -Walter
> >> >
> >> >
> >> >
> >> > jmail wrote:
> >> >> I have a Myth 20 system on a Fedora Core 4 I installed from the
> >> ATRPMS
> >> >> following Jerod's guide.
> >> >> I've been trying to get myth2ipod to install and run. I've
installed
> >> >> myth2ipod but when I execute it the log file says that ffmpeg
exited
> >> >> early.
> >> >> I suspect I don't have ffmpeg built right. How do I build ffmpeg
with
> >> >> the right properties enabled starting from a yum installed
machine.
> >> >> I've read Jerod's spec file posted in Dec. but I don't know what
> >> to do
> >> >> with this. Any detailed install instructions would be greatly
> >> >> appreciated.
> >> >>
> >> >> Chris
> >> >> _______________________________________________
> >> >> mythtv-users mailing list
> >> >> mythtv-users [at] mythtv
> >> >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users)
> >> >>
> >> >>
> >>
------------------------------------------------------------------------
> >>
> >> _______________________________________________
> >> mythtv-users mailing list
> >> mythtv-users [at] mythtv
> >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> >
> >
------------------------------------------------------------------------
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users [at] mythtv
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
>
>
> ______________________________________________________________________
> From: Phill Edwards <philledwards [at] gmail>
> To: alex [at] alexfisher, MythTV Users List <mythtv-users [at] mythtv>
> Subject: Re: [mythtv-users] Xbox frontend and 0.20
> Date: Thu, 05 Oct 2006 22:23:36 +1000
>
> > But it's still crashing. I'm now doing:
> > # apt-get upgrade
> > to see whether that will help.
>
> No, this doesn't work either. Very strange and a real bummer because
> the frontend just won't run :(
>
>
> ______________________________________________________________________
> From: Jason <fearthepenguin [at] jasonandjessi>
> To: Discussion about mythtv <mythtv-users [at] mythtv>
> Subject: Re: [mythtv-users] GeForce 6150, SPDIF, digital passthru -
Success!
> Date: Thu, 05 Oct 2006 07:35:01 -0500
>
> excellent! Thank you both, looks like I have a new project for this
> weekend!
>
> Jason
> The place where you made your stand never mattered,
> only that you were there... and still on your feet
>
>
>
> Chad wrote:
> > On 10/4/06, Kevin Mori <kmori.nospam [at] gmail> wrote:
> >
> >> yes
> >> On Wed, 2006-10-04 at 21:43 -0500, Jason wrote:
> >>
> >>> I've never used the SPDIF on my receiver, so this is a very
uneducated
> >>> question, but if I switch to the spdif output of my soundcard,
could I
> >>> use that as my audio out for all of my content, even if it doesn't
have
> >>> AC3 encoding? MP3s and what not? It would be nice to have one,
> >>> hi-fidelity audio out into my receiver and not have to switch
inputs
> >>> between DVDs and OTA TV.
> >>>
> >>> Jason
> >>>
> >
> >
> > With a little more information and a space between your response:
> > yes. ;)
> >
> > Some people report having to use a fancy .asoundrc to get this to
> > work. However, if you are talking about using the SPDIF output
> > onboard something like the Asus M2NPV-VM, then yes, and you don't
have
> > to use any special asoundrc files. Having AC3 passthrough checked
> > will send Dolby Digital (DD) to your reciever when the stream
contains
> > an identifiable AC3 track (as in an HDTV presentation such as CSI);
> > when it does not (as in the case where you record an analog show
using
> > something like a PVR-x50), analog audio is passed digitally over
your
> > SPDIF output to your receiver which then (assuming you have comsumer
> > level equipment :D ) converts the audio to analog and out to your
> > speakers. The same holds true for your videos and mp3's, although
> > mp3s are (again sometimes) reported to play at faster/slower speeds
if
> > they are not 48000 (it seems most typically they are 44100 IIRC).
As
> > usual, I haven't noticed this either using a basically standard
> > install of Gentoo, and/or FC5.
> >
> > -Chad
> >
> >
>
>
> ______________________________________________________________________
> From: James Pifer <jep [at] obrien-pifer>
> To: Discussion about mythtv <mythtv-users [at] mythtv>
> Subject: Re: [mythtv-users] OT: PCI slots: 64 bit slots on Dell
PowerEdge
> Date: Thu, 05 Oct 2006 08:40:35 -0400
>
> On Tue, 2006-10-03 at 22:33 -0700, Justin The Cynical wrote:
> > James Pifer wrote:
> > > I've been trying to get a frontend working well with TVOut. I
bought a
> > > PCI FX5200 that I've been trying to run in a box with Athlon 1400+
> > > processor. (I've tried a lot of things, see previous posts about
> > > horsepower)
> >
> > Does it look like this card?
> >
> > http://aopen.jp/products/vga/large/fx5200-v128pci-l.jpg
> >
> > The important part is the notches in the edge connector.
> >
> > > I have another box that I decided to try and use. I moved all of
the
> > > stuff it was running to another box to free it up. It's a Dual
Xeon 1.8
> > > ghz machine. That's got to have plenty to do this. (no HD)
> > >
> > > Problem is the PCI slots. It has:
> > > two 32-bit 33MHz PCI slots
> > > two 64-bit 66MHz PCI slots
> > > two 64-bit 100MHz PCI-X slots
> >
> > Does your PCI-X slots look like these?
> >
> >
http://www.pasarlascanutas.com/bricolaje/ensamblaje_de_pc_2004/2_montar_un_pc_placa_base_022.JPG
> >
> > > Is there any way I can I use the 64 bit slots with regular PCI
cards?
> > > Maybe some kinf of riser or something? Currently the cards do not
fit. I
> > > have 3 tuners, plus the PCI FX5200. I'd be willing to trade up the
video
> > > card to something that would work, but all I can find are
PCI-Express,
> > > which to my understanding are different.
> >
> > Well, if the video card look like the image I listed, it will not
work
> > in the PCI-X slot, as PCI-X doesn't support 5V cards.
> >
> > The 64-bit slots I linked to as well are 3.3V slots, PCI cards that
are
> > not universal (5V only) won't work in them.
> >
> > Doing some google image searches, it looks like there are universal
and
> > 5V FX5200 cards, so it depends on which one you have if it will
work.
> >
> > Universal PCI cards will work in a 64-bit PCI slot. I ran a buffalo
> > wifi card in my old B&W Mac and the current Digital Audio G4, and
all
> > the general use PCI slots in those machines are 64-bit.
>
>
> The slots look like this:
> http://www.obrien-pifer.com/poweredge/poweredge.jpg
>
> I do have two regular PCI slots, so hopefully I can use those two for
> the problem cards, if there are any....
>
> The raid controller is the card that's currently in there. Based on
> another person's response, I would not want to lower the speed on that
> bus, so I probably won't use that slot unless I pick up a 64 bit
gigabit
> NIC.
>
> James
>
>
>
> ______________________________________________________________________
> From: Walter Hofstetter <walter.hofstetter [at] netwho>
> To: Discussion about mythtv <mythtv-users [at] mythtv>
> Subject: Re: [mythtv-users] myth2ipod install help
> Date: Thu, 05 Oct 2006 14:43:40 +0200
>
> I had the same error, so finally didn't use the enable-x264 switch.
> I assume, that some of the libraries to compile x264 are broken at
least
> on FC5 :-(
>
> It will compile without the x264 switch and you can still create mp4
> files which will run on your ipod.
>
> Using a syntax such as
>
> ffmpeg -i file.mpg -f mp4 -vcodec mpeg4 -maxrate 1000 -b 700 -qmin 3
-qmax 5 -bufsize 4096 -g 300 -acodec aac -ab 192 -s 320x240 -aspect 4:3
file.mp4
>
> should create ipod compatible videos.
> However you most likely will then run into issues with the myth2ipod
scipt.
> I figured, that the called nuvexport will create wrong switches and
causes ffmpeg to crash with a floating point error.
>
> I tried to modify the nuvexport code, but wasn't quit successful yet.
>
> Regards, Walter
>
>
> Chris Tepe wrote:
> > Thanks, I was getting confused between devel an source. Once I
download
> > the source it was where you stated. I couldn't get it to configure
until
> > I downloaded all the necessary devel RPMs. The config script runs
but it
> > fails during make complaining about x264.
> >
> > Here is my config command
> > ./configure --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib
> > --mandir=/usr/share/man --enable-mp3lame --enable-libogg
--enable-vorbis
> > --enable-faadbin --enable-xvid --enable-x264 --enable-a52
> > --enable-a52bin --enable-dts --enable-pp --enable-shared
> > --enable-pthreads --enable-dc1394 --enable-faac --enable-gpl
> > --disable-strip --extra-cflags="-O2 -g -pipe -Wall
> > -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386
> > -fasynchronous-unwind-tables"
> >
> > Config runs fine.
> >
> > Here is the result of make
> >
> > [root [at] mythtvserve ffmpeg-0.4.9]# make
> > make -C libavutil all
> > make[1]: Entering directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil'
> > make[1]: Nothing to be done for `all'.
> > make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil'
> > make -C libavcodec all
> > make[1]: Entering directory
> > `/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavcodec'
> > gcc -DHAVE_AV_CONFIG_H -I..
> > -I/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil -O2 -g -pipe -Wall
> > -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386
> > -fasynchronous-unwind-tables -pthread -g
-Wdeclaration-after-statement
> > -Wall -Wno-switch -Wdisabled-optimization -Wpointer-arith
> > -Wredundant-decls -Winline -O3 -D_FILE_OFFSET_BITS=64
> > -D_LARGEFILE_SOURCE -D_ISOC9X_SOURCE -c -o x264.o x264.c
> > In file included from
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:195:1:
> > warning: "sprintf" redefined
> > In file included from /usr/include/stdio.h:834,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:36,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/include/bits/stdio2.h:30:1: warning: this is the location of
the
> > previous definition
> > In file included from
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:196:1:
> > warning: "strcat" redefined
> > In file included from /usr/include/string.h:422,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:37,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/include/bits/string3.h:147:1: warning: this is the location of
the
> > previous definition
> > In file included from
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:198:1:
> > warning: "printf" redefined
> > In file included from /usr/include/stdio.h:834,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:36,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/include/bits/stdio2.h:65:1: warning: this is the location of
the
> > previous definition
> > In file included from
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:186,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/internal.h:199:1:
> > warning: "fprintf" redefined
> > In file included from /usr/include/stdio.h:834,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/common.h:36,
> > from /usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavutil/avutil.h:42,
> > from avcodec.h:32,
> > from x264.c:20:
> > /usr/include/bits/stdio2.h:67:1: warning: this is the location of
the
> > previous definition
> > x264.c: In function ‘X264_init’:
> > x264.c:146: error: ‘struct <anonymous>’ has no member named
> > ‘i_rc_method’
> > x264.c:146: error: ‘X264_RC_CRF’ undeclared (first use in this
function)
> > x264.c:146: error: (Each undeclared identifier is reported only once
> > x264.c:146: error: for each function it appears in.)
> > x264.c:149: error: ‘struct <anonymous>’ has no member named
> > ‘i_rc_method’
> > x264.c:149: error: ‘X264_RC_CQP’ undeclared (first use in this
function)
> > x264.c:156: error: ‘struct <anonymous>’ has no member named
> > ‘i_rc_method’
> > x264.c:156: error: ‘X264_RC_ABR’ undeclared (first use in this
function)
> > make[1]: *** [x264.o] Error 1
> > make[1]: Leaving directory
`/usr/src/redhat/SOURCES/ffmpeg-0.4.9/libavcodec'
> > make: *** [lib] Error 2
> >
> >
> > I went to http://atrpms.net/dist/fc5/ffmpeg and downloaded
> > ffmpeg-0.4.9-17_r6524.at.src.rpm
> > <http://dl.atrpms.net/all/ffmpeg-0.4.9-17_r6524.at.src.rpm>,
installed
> > (rpm -iv rpmfile).
> > After that the source tar will be in /usr/src/redhat/SOURCES.
> >
> > -Walter
> >
> >
> > Chris Tepe wrote:
> >
> >> I don't know what I'm doing wrong but I can't find where it is
going
> >> on my system. I used the command yum install ffmpeg-devel. It
> >> completed successfully but I can't ind where it went.
> >>
> >>
> >> Chris,
> >>
> >> You should find the source in /usr/src/redhat/SOURCES.
> >> I used the configuration from my installed ffmpeg (ffmpeg -version)
> >> will print the config/compiler options.
> >> In my case I had to add the --enable-aac parameter for the ipod
audio
> >> codec.
> >>
> >> However I'm still not able to convert recordings through myth2ipd.
> >> I'm still ending up with a SIGFPE :-(
> >>
> >> From the ATrpms-users list I got a suggestion to remove the "-ac 0
-ar
> >> 0" statement which is always present when checking how ffmpeg is
> >> called form nuvexport. So I meesed with the scripts from nuvexprt
and
> >> the SIGFPE went away, but the audio from the mp4 output is out of
> >> sync....
> >>
> >> -Walter
> >>
> >> Chris Tepe wrote:
> >>
> >>> Walter,
> >>>
> >>> I've pulled the ffmpeg source from atrpms and it installed, But I
> >>> cann't find where it installed to so I can configure and build it.
> >>> What was the configuration used to build it?
> >>>
> >>> Chris
> >>>
> >>>
> >>>> Chris,
> >>>>
> >>>> I'm currently struggling as well with the myth2ipod script.
> >>>> I took the source-rpm of ffmpeg from atrpms and recompiled ffmpeg
to
> >>>> assure the aac (codec) is enabled.
> >>>>
> >>>> I found that I can convert mpeg2 videos to mp4 (ipod) when
starting
> >>>> ffmpeg mnually.
> >>>> (In the meantime, Axel (atrpms) was very helpful and updated the
> >>>>
> >>> ffmpeg
> >>>
> >>>> package on atrpms with the using the source).
> >>>>
> >>>> I tried to nail down my problem when starting "nuvexport -debug".
> >>>> (nuvexport is called form myth2ipod).
> >>>> In the debug mode nuvexport provides a list commands executed, so
you
> >>>> just do the conversion step by step, using two shells.
> >>>> In my case the error was caused by a SIGFPE (floating point
error),
> >>>> casued by ffmpeg.....
> >>>>
> >>>> I'll investigate a bit further to check if this has to do with
the
> >>>>
> >>> fifos
> >>>
> >>>> created by nuvexport.
> >>>>
> >>>> I'm not sure how to get a hold of people coding nuvexport, but
I'll
> >>>>
> >>> also
> >>>
> >>>> post this behavior on the ffmpeg-devel list, because on the end
ffmgeg
> >>>> falls over the FPE issue...
> >>>>
> >>>> -Walter
> >>>>
> >>>>
> >>>>
> >>>> jmail wrote:
> >>>>
> >>>>> I have a Myth 20 system on a Fedora Core 4 I installed from the
> >>>>>
> >>> ATRPMS
> >>>
> >>>>> following Jerod's guide.
> >>>>> I've been trying to get myth2ipod to install and run. I've
installed
> >>>>> myth2ipod but when I execute it the log file says that ffmpeg
exited
> >>>>> early.
> >>>>> I suspect I don't have ffmpeg built right. How do I build ffmpeg
with
> >>>>> the right properties enabled starting from a yum installed
machine.
> >>>>> I've read Jerod's spec file posted in Dec. but I don't know what
> >>>>>
> >>> to do
> >>>
> >>>>> with this. Any detailed install instructions would be greatly
> >>>>> appreciated.
> >>>>>
> >>>>> Chris
> >>>>> _______________________________________________
> >>>>> mythtv-users mailing list
> >>>>> mythtv-users [at] mythtv
> >>>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users)
> >>>>>
> >>>>>
> >>>>>
> >>>
------------------------------------------------------------------------
> >>>
> >>> _______________________________________________
> >>> mythtv-users mailing list
> >>> mythtv-users [at] mythtv
> >>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >>>
> >>
> >>
------------------------------------------------------------------------
> >>
> >> _______________________________________________
> >> mythtv-users mailing list
> >> mythtv-users [at] mythtv
> >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >>
> >
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users [at] mythtv
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
>
>
|
