brad+myth at templetons
May 29, 2006, 12:19 AM
Views: 1018
Permalink
|
>
> Add
>
> options ivtv tuner=50
>
> to your modprobe.conf. If you have multiple cards, use -1 for all the
> other tuners in a comma-separated list. I.e. if you have a PVR-150 and
> a PVR-500 set up so the 150 is initialized first (i.e. is /dev/video0),
>
> options ivtv tuner=50,-1,-1
>
> Or, if the PVR-150 is initialized last, use
>
> options ivtv tuner=-1,-1,50
>
> Mike
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
Ah! It works wonderfully. Thanks! The sound is even good. "IT IS
ALIVE!"
Alas, this is not working for me. I have also run into this problem
after upgrading to 2.6.12 kernel, ivtv 0.4.5. tveeprom identifies
the pvr250 as tuner type 50, but I still get "tuner 0-0061: tuner type not set"
even if I modprobe ivtv tuner=50
At first I was just finding I could not tune the channel (nor was I
getting any sound after the upgrade) but after more recent changes,
including add/remove of cards in mythtv-setup in an attempt to fix
other things, it now just crashes the backend if I try to use this
tuner with:
2006-05-29 00:11:25.303 MainServer: HandleRemoteEncoder(cmd IS_BUSY) Unknown enc
oder: 1, exiting
(Perhaps I've mucked something up in other upgrade efforts. Upgrading
continues to be an adventure, which means you wait a while before doing
it, and that makes it even worse...)
_______________________________________________
mythtv-users mailing list
mythtv-users[at]mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
|
Tuner type not set
