Login | Register For Free | Help
Search for: (Advanced)

Mailing List Archive: MythTV: Mythtvnz

mythfrontend closes unexpectedly

  

 
MythTV mythtvnz RSS feed   Index | Next | Previous | View Threaded


noel at igrin

Aug 29, 2010, 8:48 PM

Post #1 of 17 (1356 views)
Permalink
mythfrontend closes unexpectedly
Hi All
on our frontend machine, mythtv closes unexpectedly with this log snip..

[ 18.465627] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.544478] Console: switching to colour frame buffer device 240x67
[ 18.903895] lirc_dev: IR Remote Control driver registered, major 61
[ 18.922957] lirc_mceusb: Windows Media Center Edition USB IR
Transceiver driver for LIRC 1.90
[ 18.922962] lirc_mceusb: Daniel Melander <lirc [at] rajidae>, Martin
Blatter <martin_a_blatter [at] yahoo>, Dan Conti <dconti [at] acm>
[ 18.923004] usbcore: registered new interface driver lirc_mceusb
[ 19.848047] lirc_serial: auto-detected active low receiver
[ 19.848053] lirc_dev: lirc_register_driver: sample_rate: 0
[ 19.848140] lirc_serial $Revision: 5.104 $ registered
[ 19.890077] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 19.890082] tg3: eth0: Flow control is off for TX and off for RX.
[ 19.890331] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.238583] svc: failed to register lockdv1 RPC service (errno 97).
[ 21.245030] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 21.257387] NFSD: starting 90-second grace period
[ 30.636025] eth0: no IPv6 routers present
[ 31.222536] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
[ 32.092067] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
[ 84.580038] Clocksource tsc unstable (delta = -87096854 ns)
[ 158.444048] usb 1-7: new high speed USB device using ehci_hcd and
address 3
[ 158.580332] usb 1-7: configuration #1 chosen from 1 choice
[ 158.634361] Initializing USB Mass Storage driver...
[ 158.6345

At 21s mark there is the error.. but I don't know what it is!!
I have recently changed the back end machine, but the system worked for a
week since this. Then a few days ago the power-off via remote stopped
working, & now the frontend menu closes as soon as it opens.

Cheers Noel


_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


criggie at criggie

Aug 29, 2010, 8:54 PM

Post #2 of 17 (1347 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
That's a dmesg log not a mythfrontend log. Check out whats in the
myth log file.

The line about RPC is to do with NFS mounting - if you don't use NFS
then no big deal.
Two errors at 31/32 seconds are to do with an ATI Radeon video card.
Google suggests it might be a bug in xserver-xorg-driver-ati
https://bugs.launchpad.net/ubuntu/lucid/+source/linux/+bug/507148

noel [at] igrin wrote, On 08/30/2010 03:48 PM:
> Hi All
> on our frontend machine, mythtv closes unexpectedly with this log snip..
>
> [ 18.465627] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 18.544478] Console: switching to colour frame buffer device 240x67
> [ 18.903895] lirc_dev: IR Remote Control driver registered, major 61
> [ 18.922957] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
> [ 18.922962] lirc_mceusb: Daniel Melander<lirc [at] rajidae>, Martin Blatter<martin_a_blatter@
> [ 18.923004] usbcore: registered new interface driver lirc_mceusb
> [ 19.848047] lirc_serial: auto-detected active low receiver
> [ 19.848053] lirc_dev: lirc_register_driver: sample_rate: 0
> [ 19.848140] lirc_serial $Revision: 5.104 $ registered
> [ 19.890077] tg3: eth0: Link is up at 100 Mbps, full duplex.
> [ 19.890082] tg3: eth0: Flow control is off for TX and off for RX.
> [ 19.890331] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 21.238583] svc: failed to register lockdv1 RPC service (errno 97).
> [ 21.245030] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 21.257387] NFSD: starting 90-second grace period
> [ 30.636025] eth0: no IPv6 routers present
> [ 31.222536] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
> [ 32.092067] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
> [ 84.580038] Clocksource tsc unstable (delta = -87096854 ns)
> [ 158.444048] usb 1-7: new high speed USB device using ehci_hcd and address 3
> [ 158.580332] usb 1-7: configuration #1 chosen from 1 choice
> [ 158.634361] Initializing USB Mass Storage driver...
>
> At 21s mark there is the error.. but I don't know what it is!!
> I have recently changed the back end machine, but the system worked for a
> week since this. Then a few days ago the power-off via remote stopped
> working,& now the frontend menu closes as soon as it opens.


_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


nick.rout at gmail

Aug 29, 2010, 8:57 PM

Post #3 of 17 (1343 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
On Mon, Aug 30, 2010 at 3:48 PM, <noel [at] igrin> wrote:
> Hi All
> on our frontend machine, mythtv closes unexpectedly with this log snip..
>
> [   18.465627] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [   18.544478] Console: switching to colour frame buffer device 240x67
> [   18.903895] lirc_dev: IR Remote Control driver registered, major 61
> [   18.922957] lirc_mceusb: Windows Media Center Edition USB IR
> Transceiver driver for LIRC 1.90
> [   18.922962] lirc_mceusb: Daniel Melander <lirc [at] rajidae>, Martin
> Blatter <martin_a_blatter [at] yahoo>, Dan Conti <dconti [at] acm>
> [   18.923004] usbcore: registered new interface driver lirc_mceusb
> [   19.848047] lirc_serial: auto-detected active low receiver
> [   19.848053] lirc_dev: lirc_register_driver: sample_rate: 0
> [   19.848140] lirc_serial $Revision: 5.104 $ registered
> [   19.890077] tg3: eth0: Link is up at 100 Mbps, full duplex.
> [   19.890082] tg3: eth0: Flow control is off for TX and off for RX.
> [   19.890331] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [   21.238583] svc: failed to register lockdv1 RPC service (errno 97).
> [   21.245030] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
> recovery directory
> [   21.257387] NFSD: starting 90-second grace period
> [   30.636025] eth0: no IPv6 routers present
> [   31.222536] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
> [   32.092067] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
> [   84.580038] Clocksource tsc unstable (delta = -87096854 ns)
> [  158.444048] usb 1-7: new high speed USB device using ehci_hcd and
> address 3
> [  158.580332] usb 1-7: configuration #1 chosen from 1 choice
> [  158.634361] Initializing USB Mass Storage driver...
> [  158.6345


That is not your mythfrontend log. Try giving us that...

I do see a radeon error, presumably you are using an ATi video card, tsk tsk.

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


joel at aenertia

Aug 29, 2010, 9:00 PM

Post #4 of 17 (1346 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
Latest nvidia drivers 254.44 are really really buggy .

On 30 August 2010 15:57, Nick Rout <nick.rout [at] gmail> wrote:
> On Mon, Aug 30, 2010 at 3:48 PM,  <noel [at] igrin> wrote:
>> Hi All
>> on our frontend machine, mythtv closes unexpectedly with this log snip..
>>
>> [   18.465627] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [   18.544478] Console: switching to colour frame buffer device 240x67
>> [   18.903895] lirc_dev: IR Remote Control driver registered, major 61
>> [   18.922957] lirc_mceusb: Windows Media Center Edition USB IR
>> Transceiver driver for LIRC 1.90
>> [   18.922962] lirc_mceusb: Daniel Melander <lirc [at] rajidae>, Martin
>> Blatter <martin_a_blatter [at] yahoo>, Dan Conti <dconti [at] acm>
>> [   18.923004] usbcore: registered new interface driver lirc_mceusb
>> [   19.848047] lirc_serial: auto-detected active low receiver
>> [   19.848053] lirc_dev: lirc_register_driver: sample_rate: 0
>> [   19.848140] lirc_serial $Revision: 5.104 $ registered
>> [   19.890077] tg3: eth0: Link is up at 100 Mbps, full duplex.
>> [   19.890082] tg3: eth0: Flow control is off for TX and off for RX.
>> [   19.890331] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> [   21.238583] svc: failed to register lockdv1 RPC service (errno 97).
>> [   21.245030] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
>> recovery directory
>> [   21.257387] NFSD: starting 90-second grace period
>> [   30.636025] eth0: no IPv6 routers present
>> [   31.222536] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
>> [   32.092067] [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
>> [   84.580038] Clocksource tsc unstable (delta = -87096854 ns)
>> [  158.444048] usb 1-7: new high speed USB device using ehci_hcd and
>> address 3
>> [  158.580332] usb 1-7: configuration #1 chosen from 1 choice
>> [  158.634361] Initializing USB Mass Storage driver...
>> [  158.6345
>
>
> That is not your mythfrontend log. Try giving us that...
>
> I do see a radeon error, presumably you are using an ATi video card, tsk  tsk.
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz [at] lists
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


tortise at paradise

Aug 29, 2010, 9:32 PM

Post #5 of 17 (1337 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
----- Original Message -----
From: "Joel Wiramu Pauling" <joel [at] aenertia>
To: "MythTV in NZ" <mythtvnz [at] lists>
Sent: Monday, August 30, 2010 4:00 PM
Subject: Re: [mythtvnz] mythfrontend closes unexpectedly


> Latest nvidia drivers 254.44 are really really buggy .

I've not had any problems with 256.44. Maybe its cause they are stated as 254.44 or driving an ATI card?

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


tortise at paradise

Aug 29, 2010, 9:32 PM

Post #6 of 17 (1337 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
----- Original Message -----
From: "Joel Wiramu Pauling" <joel [at] aenertia>
To: "MythTV in NZ" <mythtvnz [at] lists>
Sent: Monday, August 30, 2010 4:00 PM
Subject: Re: [mythtvnz] mythfrontend closes unexpectedly


> Latest nvidia drivers 254.44 are really really buggy .

I've not had any problems with 256.44. Maybe its cause they are stated as 254.44 or driving an ATI card?

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


joel at aenertia

Aug 29, 2010, 9:41 PM

Post #7 of 17 (1337 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
https://bugs.launchpad.net/xorg-server/+bug/626159?comments=all

On 30 August 2010 16:32, Tortise <tortise [at] paradise> wrote:
> ----- Original Message -----
> From: "Joel Wiramu Pauling" <joel [at] aenertia>
> To: "MythTV in NZ" <mythtvnz [at] lists>
> Sent: Monday, August 30, 2010 4:00 PM
> Subject: Re: [mythtvnz] mythfrontend closes unexpectedly
>
>
>> Latest nvidia drivers 254.44 are really really buggy .
>
> I've not had any problems with 256.44.   Maybe its cause they are stated as 254.44 or driving an ATI card?
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz [at] lists
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


joel at aenertia

Aug 29, 2010, 9:43 PM

Post #8 of 17 (1353 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
Have been doing a lot of testing, 256.44 are fail in a lot of ways on
a wide range of hardware. Nvidia did a pre-release of 256.52 this
morning nz time, which I am hoping fixes things. Testing tonight.

On 30 August 2010 16:41, Joel Wiramu Pauling <joel [at] aenertia> wrote:
> https://bugs.launchpad.net/xorg-server/+bug/626159?comments=all
>
> On 30 August 2010 16:32, Tortise <tortise [at] paradise> wrote:
>> ----- Original Message -----
>> From: "Joel Wiramu Pauling" <joel [at] aenertia>
>> To: "MythTV in NZ" <mythtvnz [at] lists>
>> Sent: Monday, August 30, 2010 4:00 PM
>> Subject: Re: [mythtvnz] mythfrontend closes unexpectedly
>>
>>
>>> Latest nvidia drivers 254.44 are really really buggy .
>>
>> I've not had any problems with 256.44.   Maybe its cause they are stated as 254.44 or driving an ATI card?
>>
>> _______________________________________________
>> mythtvnz mailing list
>> mythtvnz [at] lists
>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


tortise at paradise

Aug 29, 2010, 10:27 PM

Post #9 of 17 (1330 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
----- Original Message -----
From: "Joel Wiramu Pauling" <joel [at] aenertia>
To: "MythTV in NZ" <mythtvnz [at] lists>
Sent: Monday, August 30, 2010 4:41 PM
Subject: Re: [mythtvnz] mythfrontend closes unexpectedly


> https://bugs.launchpad.net/xorg-server/+bug/626159?comments=all

Ahhh. That's on Maverick. Is anyone promoting Maverick as being stable yet?

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


noel at igrin

Aug 30, 2010, 2:14 AM

Post #10 of 17 (1323 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
>
> That is not your mythfrontend log. Try giving us that...
>
> I do see a radeon error, presumably you are using an ATi video card, tsk
> tsk.
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz [at] lists
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>

Well this machine has onboard video, and I use VGA to the TV.
Anyway here's frontend log snip..

2010-08-30 06:39:38.575 Found mainmenu.xml for theme 'Childish'
2010-08-30 06:39:38.679 Using NV NPOT texture extension
2010-08-30 06:39:39.079 MythContext: Connecting to backend server:
192.168.0.50:6543 (try 1 of 1)
2010-08-30 06:39:39.081 Using protocol version 56
drmRadeonCmdBuffer: -12. Kernel failed to parse or rejected command
stream. See dmesg for more info.






_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


criggie at criggie

Aug 30, 2010, 2:48 AM

Post #11 of 17 (1327 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
On 30/08/10 21:14, noel [at] igrin wrote:
> Well this machine has onboard video, and I use VGA to the TV.
> Anyway here's frontend log snip..
>
> 2010-08-30 06:39:38.575 Found mainmenu.xml for theme 'Childish'
> 2010-08-30 06:39:38.679 Using NV NPOT texture extension
> 2010-08-30 06:39:39.079 MythContext: Connecting to backend server:
> 192.168.0.50:6543 (try 1 of 1)
> 2010-08-30 06:39:39.081 Using protocol version 56
> drmRadeonCmdBuffer: -12. Kernel failed to parse or rejected command
> stream. See dmesg for more info.


So its an error relating to an ATI radeon card. If your onboard is
ATI then perhaps there was a driver update?

If its not ATI then why is the machine loading anything about radeon?


--
Criggie

http://criggie.dyndns.org/

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


nick.rout at gmail

Aug 30, 2010, 12:46 PM

Post #12 of 17 (1306 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
On Mon, Aug 30, 2010 at 4:00 PM, Joel Wiramu Pauling <joel [at] aenertia> wrote:
> Latest nvidia drivers 254.44 are really really buggy .


Please, what has nvidia to do with this problem?

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


nick.rout at gmail

Aug 30, 2010, 12:58 PM

Post #13 of 17 (1296 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
On Mon, Aug 30, 2010 at 9:14 PM, <noel [at] igrin> wrote:
>>
>> That is not your mythfrontend log. Try giving us that...
>>
>> I do see a radeon error, presumably you are using an ATi video card, tsk
>> tsk.
>>
>> _______________________________________________
>> mythtvnz mailing list
>> mythtvnz [at] lists
>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>
> Well this machine has onboard video, and I use VGA to the TV.
> Anyway here's frontend log snip..
>
> 2010-08-30 06:39:38.575 Found mainmenu.xml for theme 'Childish'
> 2010-08-30 06:39:38.679 Using NV NPOT texture extension
> 2010-08-30 06:39:39.079 MythContext: Connecting to backend server:
> 192.168.0.50:6543 (try 1 of 1)
> 2010-08-30 06:39:39.081 Using protocol version 56
> drmRadeonCmdBuffer: -12. Kernel failed to parse or rejected command
> stream. See dmesg for more info.
>

googling this error seems to indicate it is a GL error. Perhaps
turning off opengl rendering would "fix" it.

Or reverting the update that introduced a new driver for your ATi card?

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


noel at igrin

Aug 30, 2010, 6:59 PM

Post #14 of 17 (1291 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
> googling this error seems to indicate it is a GL error. Perhaps
> turning off opengl rendering would "fix" it.
>
> Or reverting the update that introduced a new driver for your ATi card?
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz [at] lists
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>

OK thanks, Now where in the xfce can I turn off opengl? I have looked at
all the "trees" and only see the"woods" now!

Reverting adaily auto-build, never done that before.. I will try loading
the previous kernel option from the grub menu.. didn't think of that
before.

Will try this all tonight.


_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


noel at igrin

Aug 30, 2010, 11:53 PM

Post #15 of 17 (1286 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
>
>> googling this error seems to indicate it is a GL error. Perhaps
>> turning off opengl rendering would "fix" it.
>>
>> Or reverting the update that introduced a new driver for your ATi card?
>>
>> _______________________________________________
>> mythtvnz mailing list
>> mythtvnz [at] lists
>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>
>
> OK thanks, Now where in the xfce can I turn off opengl? I have looked at
> all the "trees" and only see the"woods" now!
>
> Reverting adaily auto-build, never done that before.. I will try loading
> the previous kernel option from the grub menu.. didn't think of that
> before.
>
> Will try this all tonight.
>
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz [at] lists
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/

Re installed the front end from the CD, dang thang wanted to start in lo
graphics mode squealing about no frlgx. did apt-get for frlgx. and a
restrart, still no go.
>



_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/


noel at igrin

Sep 3, 2010, 1:17 PM

Post #16 of 17 (1204 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
Nick Rout wrote:
> On Mon, Aug 30, 2010 at 9:14 PM, <noel [at] igrin> wrote:
>
>>> That is not your mythfrontend log. Try giving us that...
>>>
>>> I do see a radeon error, presumably you are using an ATi video card, tsk
>>> tsk.
>>>
>>> _______________________________________________
>>> mythtvnz mailing list
>>> mythtvnz [at] lists
>>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>>
>>>
>> Well this machine has onboard video, and I use VGA to the TV.
>> Anyway here's frontend log snip..
>>
>> 2010-08-30 06:39:38.575 Found mainmenu.xml for theme 'Childish'
>> 2010-08-30 06:39:38.679 Using NV NPOT texture extension
>> 2010-08-30 06:39:39.079 MythContext: Connecting to backend server:
>> 192.168.0.50:6543 (try 1 of 1)
>> 2010-08-30 06:39:39.081 Using protocol version 56
>> drmRadeonCmdBuffer: -12. Kernel failed to parse or rejected command
>> stream. See dmesg for more info.
>>
>>
>
> googling this error seems to indicate it is a GL error. Perhaps
> turning off opengl rendering would "fix" it.
>
> Or reverting the update that introduced a new driver for your ATi card?
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz [at] lists
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
>
Well I have been running our frontend off the live CD for the last
week. It seems to have settings persistence when the frontend is
powered off, which is good. So... How do we know when a fix is
implemented successfully? Don't want to risk depleting the WAF.


noel at igrin

Sep 3, 2010, 1:24 PM

Post #17 of 17 (1205 views)
Permalink
Re: mythfrontend closes unexpectedly [In reply to]
Nick Rout wrote:
> On Mon, Aug 30, 2010 at 9:14 PM, <noel [at] igrin> wrote:
>
>>> That is not your mythfrontend log. Try giving us that...
>>>
>>> I do see a radeon error, presumably you are using an ATi video card, tsk
>>> tsk.
>>>
>>> _______________________________________________
>>> mythtvnz mailing list
>>> mythtvnz [at] lists
>>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
>>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>>>
>>>
>> Well this machine has onboard video, and I use VGA to the TV.
>> Anyway here's frontend log snip..
>>
>> 2010-08-30 06:39:38.575 Found mainmenu.xml for theme 'Childish'
>> 2010-08-30 06:39:38.679 Using NV NPOT texture extension
>> 2010-08-30 06:39:39.079 MythContext: Connecting to backend server:
>> 192.168.0.50:6543 (try 1 of 1)
>> 2010-08-30 06:39:39.081 Using protocol version 56
>> drmRadeonCmdBuffer: -12. Kernel failed to parse or rejected command
>> stream. See dmesg for more info.
>>
>>
>
> googling this error seems to indicate it is a GL error. Perhaps
> turning off opengl rendering would "fix" it.
>
> Or reverting the update that introduced a new driver for your ATi card?
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz [at] lists
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
>
Well I have been running our frontend off the live CD for the last week
- with no remote support. It seems to have settings persistence when
the frontend is powered off, which is good in that respect. So... How
do we /really/ know when a fix is implemented successfully? Don't want
to risk depleting the WAF again.

_______________________________________________
mythtvnz mailing list
mythtvnz [at] lists
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/

MythTV mythtvnz RSS feed   Index | Next | Previous | View Threaded
 
 


Interested in having your list archived? Contact Gossamer Threads
 
  Web Applications & Managed Hosting Powered by Gossamer Threads Inc.