vance at juniper
Dec 27, 2008, 4:29 PM
Views: 1530
Permalink
|
|
Haupauge Nova-T 500 setup
|
|
Support for this card looks complete from what I can read, but I'm
struggling to get it working. (I'm using 2.6.27-9-generic)
I've tried setting the capture card type as MPEG-2 (PVR-x50, PVR-500),
but it didn't look so good. Setting it as "DVB DTV capture card (v3.x)"
seems better in that I can pick the tuner device (0 or 1), but still no
video/tuning options. What am I missing here?
Boot messages:
[ 10.876425] dib0700: loaded with support for 7 different device-types
[ 10.877063] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in
warm state.
[ 10.877114] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 10.877241] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
DVB-T)
[ 10.897500] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 10.930381] hda_codec: Unknown model for ALC882, trying auto-probe
from BIOS...
[ 10.991715] DVB: registering frontend 0 (DiBcom 3000MC/P)...
[ 11.024481] MT2060: successfully identified (IF1 = 1239)
[ 11.511803] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 11.511985] DVB: registering new adapter (Hauppauge Nova-T 500 Dual
DVB-T)
[ 11.518053] DVB: registering frontend 1 (DiBcom 3000MC/P)...
[ 11.524425] MT2060: successfully identified (IF1 = 1235)
[ 12.081915] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.4/0000:03:06.2/usb8/8-1/input/input6
[ 12.117068] dvb-usb: schedule remote query interval to 150 msecs.
[ 12.117072] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully
initialized and connected.
[ 12.117314] usbcore: registered new interface driver dvb_usb_dib0700
Vance
_______________________________________________
mythtvnz mailing list
mythtvnz[at]lists.linuxnut.co.nz
http://lists.ourshack.com/mailman/listinfo/mythtvnz
Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
|
Haupauge Nova-T 500 setup
