tim at wheresrover
Feb 2, 2008, 2:31 AM
Post #3 of 7
(1473 views)
Permalink
|
Isn't that for when you have multiple video sources
eg
2x DVB-T in video source freeview
1xdvb-s in video source sky
I thought it meant if selected the eit stuff would move between the
two groups
Or do you mean that i should create a videosource called say nova500
and one called novausb
tick the box and enable eit for novausb only?
Tim
On 2 Feb 2008, at 10:23, John Pilkington wrote:
> Tim Jordan wrote:
>> Is there a way through the database or other of selectively disabling
>> EIT scanning? I have 2 NOVA-t 500's and a usb2 NOVA-t and at the
>> moment am rebooting every morning as the eit crawl through the night
>> is causing the 500's drivers to break. The linuxtv site has this as
>> an
>> acknowledged problem.
>> If there isn't what would be the best way about doing this and if I
>> did get my hands dirty and implement it is likely to be accepted?
>> My initial thoughts were an extra checkbox on the capturecard screen
>> and subsequent setting in the capturecard setting (set to on by
>> default to cover existing behaviour) which the eit crawl checks to
>> see
>> if the card is available for crawl.
>>
>> Tim
>
> Try at Mythtvsetup -> General -> -> -> EIT Scanner Options ->
> Cross
> Source EIT
>
> John P
>
>
>
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev [at] mythtv
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
_______________________________________________
mythtv-dev mailing list
mythtv-dev [at] mythtv
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
|
