wimfokkens at planet
Jan 10, 2006, 1:03 PM
Post #3 of 10
(1527 views)
Permalink
|
Mark wrote:
It's not really a bug. It seems all DiSEqC equipment behaves differently.
I've had to fiddle with the diseqc code quite a bit in order to get my
configuration working properly.
Ok but how do other programmers cope with this problem. I have used lots of
other program's (under windows) and never experienced these problems before.
Mark wrote
To answer your question, that bit of code exists on SVN so it probably
exists in KnoppMyth as well.
I installed knoppmyth R5A30 now. But diseqc is still not working.
Wim
_____
From: Wim Fokkens [mailto:wimfokkens [at] planet]
Sent: Tuesday, January 03, 2006 4:51 PM
To: mythtv-dev [at] mythtv
Subject: [mythtv] Diseqc Switching still not working?
I firs post this at myth users but I got no responds
_____
Van: mythtv-users-bounces [at] mythtv
[mailto:mythtv-users-bounces [at] mythtv] Namens Wim Fokkens
Verzonden: woensdag 28 december 2005 11:48
Aan: Discussion about mythtv
Onderwerp: [mythtv-users] Diseqc Switching still not working?
Hello
I am running knoppmyth R5A26. I have a 4 way diseqc switch.
LNB1 is astra 19.2 LNB2 is astra 28.2 and LNB3 is hotbird 13.0.
If I run mythsetup I am not able to scan channels at LNB 2 & 3.
I tried with a Technotrend Budget and a KNC1 satellite card.
If I bypass the diseqc switch I am able to scan the channels.
I searched the user list and I found the following.
DVB, Diseqc and scan
At the end of this discusion Johan had found a solution.
>Hi all
>I've fixed my problem thx to Arne Varholm. I found some old postings on
>the dev mailing list about the issue I'm facing so i contacted one of
>the fellows in the discussion and Arne told me that I could comment out
>the following lines in dvbdiseqc.cpp
>if (ioctl(fd_frontend, FE_DISEQC_SEND_BURST, SEC_MINI_A ) == -1)
>{
>ERRNO("FE_DISEQC_SEND_BURST failed");
>return false;
>}
>Now it works like a charm. My C++ skills ar very basic and I do not know
>how to file a bug report (if this is a bug) so that it can be
>implemented in the source distribution. The code fragment above is still
>in the CVS. But as i said, my C++ skills are very basic and I do not if
>one just can remove these lines without disturbing something else
>Johan
Does this bug still exist in knoppmyth R5A26?
Wim
EMAIL DISCLAIMER
Please Note: The information contained in this message may be privileged and
confidential, protected from disclosure, and/or intended only for the use of
the individual or entity named above. If the reader of this message is not
the intended recipient, or an employee or agent responsible for delivering
this message to the intended recipient, you are hereby notified that any
disclosure, distribution, copying or other dissemination of this
communication is strictly prohibited. If you received this communication in
error, please immediately reply to the sender, delete the message and
destroy all copies of it.
Thank You
|
ATT00041.txt
